Search results for query: *

I picked up a parts car for my 1996 Neon. Unbeknownst to me, Neon 2.0L engines changed in 2003 and don't retrofit. This engine is solid, has 180k miles on it, and has 130psi compression or better on all cylinders. The automatic trans worked when I started tearing it down; this car got wrecked...

I have an A-518 from the '99 Ram that I got when I bought the 5.9 that is in my Dart. It's an electronic trans so I have no used for it, but maybe you do! Ran fine when pulled from a truck that died by virtue of front-end collision. $100, and I'll deliver to KC and central MO area. Thank you!

I've had this bellhousing forever. I think it's a truck housing since it has the timing window. Trans pilot hole is 5 1/8" but this DOES NOT FIT Overdrive/A-833. This MAY fit NP435 as mentioned below. $50 plus actual shipping to you. Trades considered. Thanks John

This shifter has a B+M handle and is either a Starshifter or Megashifter. It's set up with a PRND321 pattern so is probably for Chevy's as is. I don't deal with these much but a buddy said you can put a bolt in it so it goes PRND21 like a 727/518 or 904/500 would use. No cable included but...

I've had this for a few years now. This weight will bolt to any McLeod neutral balance flywheel and balance it properly for the 5.9 Magnum (NOT 360). With the McLeod print, you can modify any neutral balance flywheel to accept this weight. The part number is older but I did call McLeod and...

I had this AVS (List #HO 4966S) on a 360 years ago and it ran well. I would say that it will need a kit, it's been in storage for a decade. The idle speed adjuster screw got broken at some point so someone rigged up this bracket that bolted under the carb screw. Ugly but it works. $75 plus...

Turns out I bought this to replace my cast iron intake and....I already have an aluminum intake. So up for sale: a brand new Edelbrock 440 Six-Pac intake w/ Chrysler number P04529056 on it. This manifold has never been bolted on, still new in box, still with all factory packaging. I am asking...

I've got a brand-new rebuild kit for A-833 4-speeds for sale. I bought it from Passon Performance for mine, but ended up going with a new transmission from Passon, so here it is. Original invoice included. This kit includes ALL bearings, all gaskets, all seals, stoprings, and everything you...

There's a 440 4-bbl with auto trans in a C-body at the Pick n' Pull on Truman road in Kansas City, Missouri, and it's half price weekend. That means you can score the motor and trans, with accessory brackets for around $200 (depending on long/short block). I don't know if anything's wrong with...

Here are the links to some of my Craigslist ads. For FABO members, I'll foot the shipping bill on the carb, so consider those prices shipped. On the Snap-On box, $15 additional for shipping and local pickup is always an option Carter AVS 4966S '71 440...

I'm selling a Holley 6210 650cfm spreadbore double pumper (I believe that to be what this is, but if it isn't, PLEASE correct me. I'm not a Holley guru). I've never used it, and it needs a rebuild. The shafts seem tight and the linkage works correctly. This is the ultimate carb for you...

I ended up not needing this water pumps for Ram with Cummins. MOPAR factory part number 68003402AB, New inna box, and it's not even three months old. I'm not sure what all years it fits, but your friendly local internets and parts chaps can tell you. This is NEW, not a reman, nor an...

I have two pairs of FMJ spindles with slider caliper brackets for sale. They are sold as matched pairs and have been lightly wire-wheeled, visually inspected for cracks (None found, naturally), and are in excellent shape. All bolts and bearing retaining nuts and hardware are included, except...

I am selling some miscellaneous parts I no longer need. Hood scoop: From my 1972 Demon that I parted out. It's been primered over and the whole car was that way when I got it, but the car never had any bodywork done to it under the primer so I doubt that this scoop has any damage under the...

I found a TQ from a mid-80's Ramcharger. What do they bring these days? It's going to need a cleaning and going through, but appears complete and unmolested. Thanks John

I have a set of Comp Cams #901-16 valve springs with Comp Cams appropriate retainers (Sorry, I cannot remember the part number on the retainers). These have approximately 400 miles of break-in use in my 360 before my cam wiped a lobe. They were driven on very gently and not over-revved or...

Listen up Magnum 5.9 owners! Wanting to run that Magnum with a manual transmission? Grab yourself a Mcleod flywheel and balance it to Magnum specs with this simple bolt-on weight! This is GREAT if you're racing a small block with manual trans, and want to upgrade to the Magnum or MP Crate 5.9...

I have a nearly-new set of Mopar Performance A-body torsion bars for sale. These are the .890 diameter bars that are for use with autocross, and performance V8 driving. This is the set that you want if you drive even semi-aggressively on the street. The .920 diameter bars will beat the heck...

I am selling my nearly-new Mopar Performance 360 flywheel and clutch/pressure plate. This was behind a stock 360 in my Dart before the camshaft wiped several lobes on the fourth time I drove it (New oils SUCK for old cars! Get the ZDDP additive to save your camshaft!!). I replaced the 360...

I'm selling a damn-near-new Mopar Performance 360 flywheel. Has only 400 street-only miles on it with NO burn marks or overheats. I popped the 360, replaced it with something else that had different balance, and so I don't need this 'wheel anymore. If you want it, I'll include the...

It's a 23 spline, slip-yoke, middle range low gear (Not the 3.09, not the steep one), A-body 4-speed. It was in a running, driving car. I pulled it out and was going to re-build it during a motor swap. It needs a couple of gears (or some patience and a file to restore synchro teeth) and I don't...

I have a heapin' helping of manifolds for sale. $10 each, $15 per MATCHED set, but I will ask you to pay shipping (and only shipping) on top of that. Come get 'em, no shipping!! 1 pair large outlet (1993) Magnum manifolds 1 pair '72 340 manifolds 2 pair normal Magnum manifolds 1 pair 318...

I have a set of the .810 Mopar Performance torsion bars for sale. These have ONLY 400 miles on them. I'm replacing them due to a motor swap. They have been installed and removed using the proper tool and don't have any nicks or gauges. $150 or best offer, shipped from Kansas City, Missouri...