Search results for query: *

It's holding up fine. I drive it probably 7,000 - 8,000 miles per year. I always use the clutch, regardless if I'm granny shifting, or shifting it hard. For downshifting, I blip the throttle to rev match and it smoothly goes out of/into gear. It's been on my mind to pull the cover and take a...

Any members on here going to the Westlake Mopars cruise this Sunday, Fresh Chef, Denver, NC. 3 p.m. ?

Hello All, Have not been on here since moving from Houston to Vale NC a few years ago. While in Houston I began repairing classic Mopars as a side job. I am ready to do the same since moving to North Carolina. I've owned, driven, and repaired classic Mopars for 30 plus years. I currently own a...

I remember when the internet was gaining popularity, and everyone was talking about how it would change the world, by enabling people to share ideas. It certainly did change the world...

THIS: Try to share a simple,cheap idea and all people want to do is critique. Do as you see fit with your car ad I'll do as I see fit with mine.

Exactly..I have many 100's of thousands of miles on motorcycles, on and off the track. A bike doesn't leave the pits without critical parts properly torqued, and safety wired. As I racked up more miles on bikes, I began treating them as you would an airplane. Those habits carried over to my cars.

No vibration, the filter,clamp and bell housing all move together.

It was installed properly, just not tight enough for a vibrating harley.

Many years ago, I had an oil filter spin off of the freshly rebuilt motor of my motorcycle, which lead to a re-rebuild. Ever since then, all of my vehicles get the oil filter secured. My Duster and the wife's 300 are easy enough. A hose clamp in the right place without needing safety wire makes...

Welcome, I grew up about 5 miles from Thompson Dragstrip... spent a good amount of time there.

You say that you drive it a few times per week?? As you drive it, ask yourself what you like the least about driving it. Lack of power? Start with an engine swap.... Poor handling? Start with suspension upgrades... YOU are the only person that can give yourself a starting point as far as...

I used the normal 4 bolt to 2 bolt adapter from Mancini on my 1977 D100, when going from power to manual,same adapter as I used on both my A bodies. I used a 1.0625" and the pedal is really hard, with very little travel. Adjust bore size to suit your preference for pedal feel..I think power...

Getting ready to swap a 318 into my Scamp, and will be parting out the slant 6 drivetrain. Was my daily driver until a few weeks ago. Pick up in Charlotte area. Can here run. Motor - 1975 slant 6 equipped with factory 2 bbl .and all factory kickdown linkage. $350 for complete engine...

With Schumacher out of business, is there anyone making slant 6 to 318 conversion spool mounts ?

Looking for an 8.25" rearend for an A body in the Charlotte NC area.

1975 Scamp factory a/c. Is it possible for the HVA. controls in the dash to have a vacuum leak, and cause a lean condition ? If vacuum is applied to the vacuum line that controls the water valve, should it hold the vacuum, if it doesn't, does that mean that there is a leak in the dash controls ?

Excellent ! Thank you!

Is there a supplier for the vin sticker that is on the drivers side door, above the striker latch on a 1971 Duster ?

Been carrying this daily since about 1985. It's a made in USA Western W77. It's been used for poking,prodding,prying, and all the other things knives are used for, and is still serving me well. They can still be found on eBay in nice shape for reasonable prices.

Lot of good technical information here on the de-coupling, sound barriers, sound isolators etc. Products | Sound Deadener Showdown

Does it still have the "test". button under the hood ?

Does your car have seatbelt interlock system ?

Looking for a 5.9 Magnum. Would prefer if I could hear it running in the truck,but not necessary. I am in Lincoln county North Carolina, would like to keep it within an hour drive or so.

I had a 30x40x8 garage in Ohio that was fully finished with blow in insulation in the attic, bat in the walls and fully drywalled. I used a wood pellet stove, and one night when it was 10 below zero, out of curiosity I cranked up the stove, and had the thermometer well over 85 degrees within an...

What part of NC ?

House isn't much bigger than a van, AND there is a creek in the front yard !

Moved to a house half the size with a garage that's 40x100

thanks, but I no longer have it since I moved..

ii had a 30x50 with 12' walls and 16'ish at the peak wood fram and metal siding. I used the prodex from the link. I I stapled it floor to ceiling and taped the seams with foil tape. I think it helped somewhat with keeping the mid day Houston heat out, but it certainly cut down on the drafts...

I have a slant six 904 combination in my Scamp. Is there an aftermarket tailshaft bushing that is sized correctly on the inside dimension? lit seems that the only aftermarket bushings available are aluminum,and those seem to have an inside diameter that is too large to support the yoke. The...