Search results for query: *

This fits the 63 to 65 with factory bucket seats... 66 A Bodies take one " Sightly wider " for the newer clam shell Buckets .... Mine just fits snug between the seats... no bolts needed ! I am totally pleased ... finally more storage then the tiny hard to reach glove box... and a place to...

My 65 B-cuda... 4 speed.. 3:55 sure grip 8-3/4... Updated to Slip Yoke & 10.5 clutch/pressure plate/bell housing w/braced firewall... and a few other things maybe Love the 4 speed... always have! Even at 77, I still slam gears! Note my last photo is my " Other " car... An 09 Challenger SRT, I'm...

Yeah, I could more easily make a stamp die... and make them... just find some sheet rubber of correct thickness that would stretch over the Center Lock. 2 inch od, 3/4 id, .050 thick (maybe a little thicker) Way better then old brittle half century plus factory originals! Good idea cudamark !

My " Original" 65 B-cuda Gas Cap got a brittle seal and cracked... I put in a needle in it to show the Crack as you don't see it otherwise... so check yours closely!!! (If you use this type) My 2nd cap ( made by Stant I believe ) was much better with thicker/ softer gasket... My fall back cap...

My solution was to goto the 1967 Flip Top Gas Cap... It has a nice heavy spring on the cap, holding it "tight" onto a piece of Delrin I machined with a Rounded sealing surface ! And on the back side there is a large O ring around the factory fuel neck that seals to the Delrin adapter + 2 more...

This is how I did it oh so many years ago... Posting this "Option" ... I wanted to hide my proportion valve...

2 bbl 273 yes for Belvedere / Coronet ! 4 bbl 273 Nope ! See my Dealership brochure for "The Roaring 65's "

Damn hard to pick a favorite A Body... I've had a good number of them... my first one was a 64 Dart 2 Door, then a 65 Dart GT 273 4bbl /4 Speed ( I so loved this 65 as it made me into a for ever Mopar guy ) Followed by a 69 340 4 speed Dart Swinger... ( All above bought Brand New ) Now all I...

Uh, did not Realize... so I deleted a bunch of them! Clif of Az

273 64 - 66 A- body Lower hose using stock water pump that goes to the drivers side... Gates 20386 Not that long ago I needed one and found it local !

Duh, in my picture... those screws are "spares"... of course I will take care of you on this... PM me with your address... Meanwhile I will try to find a small mailer bag...

You're Most WELCOME :)

These are real original tail light lenses screws I have removed from numerous 64/65 Valiant/Barracudas ... and my taillight !!! Does this answer your Question ? Or am I misunderstanding you, my OLD Friend ? ( because these do not even come close to your description! )

Wish like Hell I would of kept my bought Brand new 77 Trail Duster 360 ( that I turned into a 360 4 BBL) ... I only have one picture of her.. sigh~ Been trying to find one for years... Had a lot of Fun with her in the Arizona desert... All I have left is the Glove box owners manual and a "TRAIL...

Merry Mopar Christmas !

Just Arrived Today... had ordered on 10/10/2021 @ www.cupholdersplus.com Narrow Slim Humphugger SLIM (219_Gold) Part# HRCHH-Slim ( Gold) Tight fit so I loosened the seat bolts Underneath and the console pushed firmly down & re-tighted seat bolts to floorboard! It ain't going anywhere! No...

Replaced the 4 speed tranny's rear drive shaft seal in my 65 `cuda as it was starting a tiny drip when when hot... ( I Hate "drips" ) At age 76, it took me a little over an hour to complete... I checked it this morning after last night's car hangout at Mixteca here in Arizona... Dry ! = Smile :)

Uh, Mr 65 Cuda 340, My center Body Grill " is " now Body Color ... pishta photo of my car was from years ago when I wanted to be "different" ... till every one here in Phoenix copied me and painted theirs Black... is when I corrected mine Back to Body color several years ago !!! Besides, I...

Front End Friday... Mopar Plymouth Bear... 65 Barracuda "S"

At 76 years of age and only 138 lbs... I have a hard time of late driving my 65 `cuda "4 Speed" with the Old Green 10.5 Borg&Beck ... hurts my Knee so much at times and it just takes away the "fun"... Out of Desperation, I dropped out the 4 Speed and Installed a different 10.5 Clutch & Pressure...

Brand? ... uh, I made that on my Mill & Lathe.... T6061 military grade Aluminum

That is the early A-Body (1965 in my case) Heavy Duty cooling package when you ordered factory A/C along with the Two piece Metal fan Shroud and 17" seven blade thermostatic cluching fan... sorry I don't have the part number :(

Hey Cliff Ramsdell... yes, been about 4 years... And, Not a single issue since... Running just fine here in Phoenix Arizona... Attached is a updated current photo !

Probably a different part # because in 66 they changed the Key Lock Cylinders in the doors/ trunk access... ?? So the Hole in the panel is slightly different ? Best to find a 66 Valiant / `cuda... but if you can't, don't overlook the 65 model year for that panel...

The 66 is the same panel used on the 65 Barracuda... and used on all 65 Valiants except the Valiant Station Wagon... Mopar part number 2422 006.. see photo below of Mopar Dealer parts catalog... so I'm pretty sure that it would apply with the 66 model year...Hope this helps you..

Paul's 68 Road Runner... let's find these bastards who stole it !

Here is my 55 Dodge Royal Lancer with 270 HEMI RedRam and two speed automatic on the dash... My love for the Hemi & Mopar started here... this picture is Early 60's My Younger Brother is sitting in it !