Search results for query: *

Anyone got any good pictures of the hood to cowl seal for 73 a body. I got a fiberglass 6 pack hood and I am trying to see how the seal goes, also need to know how the clips work. I never seen anything like them. I think I got a good idea on hood to radiator seal but maybe some picture's of that...

I am pretty lost on this one so I been working on getting car ready this year and the car randomly doesn't want to crank over. I tried starting in and park or neutral and I get nothing. I tried messing with shift linkage since I had so many problems with it last year and got nothing there...

Anyone use a slap shift that has passenger side view or any idea where this spring goes? Hopefully it this doesnt get moved I am stranded right now with busted shifter

Looking for a 42 tooth speedo gear(white). Let me know how much shipped to 48854

Long story short I am upgrading my fuel cell and the old one just had bolt in middle and the male connetor on it. I was going to try to reuse it but its to Long. So new cell has a two wire sending unit with green and yellow wire coming out. Anyone deal with these? Any idea what each wire is and...

I for the life of me cannot figure out why my cars starts shaking around 60 70 mph. I replaced everything in suspension but shocks so I figured rims because I had new tires last year. Replaced them still shakes. Any idea what I am missing

I was going to replace the rollers in my window tracks today and I started to look at new ones and thought how in the world do they stay in? Anyone ever replace these before?

This part was installed but car was never running. P4529794 on summit if you want to look at it. It cost $31 bucks on summit I am asking $15 bucks plus small priority mail box at $7.15 Located in Mason MI

I have a brand new moog upper ball joints k-772. Long story short I had a lower joint fail and they sent me a upper one instead and after run around I got I won't be putting any moog parts on my car. Not worth hassle trying to get a lower one so I am just going to sell this. New they are $23 I...

This kit is new in the box from summit racing (SUM-890023). I ended up wiring my pump right into wiring harness with a cut of switch so I didn't need this kit. Its $25 on summit so I will take $10 bucks plus shipping which will be just a small post office box. Located in Mason MI

I got this kit from hughe's racing engine and I was planning on using factory throttle cable but changed to a full lorkar set up. This kit is $55 bucks on the site and it will except the factory style throttle cable or you can spin the bracket and use the lokar style cable. I am asking $20 bucks...

So I am looking at getting new rims and keeping the tires I have. Problem I am running across is my 5in front rims are killing my selection and even though tag from weld says 5in there meansuring out about 5 1/2 inside lip to inside lip. From what I see my tire will fit a 6 in rim but would I...

This might be dumb question but this is first time dealing with a steering box. Is there's something missing here? I seen a post about some valve in there

I have a summit fan shroud that was never installed on my car lack on room. That being said this will not work if you put a 440 in Dusters, Demon, Dart not sure about the older ones but there wasn't enough room in mine. The shroud is 22 wide and 19 1/2 tall and fits a 14 inch fan. I used the...

Not sure what year this covers but I got it for my 73 dart. It has all the stubs with nuts on the back. Wood grain is coming off in a few places. No cracks or damage anywhere. Asking $25 plus shipping I am located in Mason MI

Anyone know of a good company that sell gear boxes? I replaced mine 3 years ago and I took to shop to get alignment and they said it was way to tight. I am having issues with steering sticking wear I leave it. I am steering it none stop and alignment went with no problem all one. Also has anyone...

I know everyone like moog ball joints but there customer service and standing behind there parts is trash. I had a ball joint fail at 1600 mile bent up my front suspension and destroyed my new paint job. All they want to do is send me a ball joint like that fixes the hundreds of dollars in...

Has anyone used the roller kit from classic industries? I haven't torn anything apart yet just trying to get a idea what I am in for. Looks like 4 have threads properly 2 per side and most without. How you install the ones with no threads?

So the body shop took out my side windows and from what I see broke every last one of these clips any one have a place and part number for them?

So I took car to get alignment and the guy was trying to say he couldn't do it since I put big block in tried to sell me ajustable upper control arms and few other things. He also tried to say my car shakes at 60-65 because of this. I never took alignment and suspension when I went to school so...

So I been driving the car around for a while now. Took it to a show yesterday and everything worked like it should. I go to start this morning for another show and it wouldn't start so I checked to see if it was in park moved a bit then I went to the store on way to show put it in park and it...

anyone have pictures if there wiper arms. I had them working and I have no clue what happened now. The driver side arm wont go all the way up but passenger will. One arm fell off and I put it on both ways and still cant figure out the problem. I have a 73 dart sport not sure what years are the same.

I just got the car running Wednesday, still have few things to get done and cleaned up but I figured I would put it in car show anyway Saturday and I still won. Super excited for my first one.

I switched to a 3 core champion radiator and the hose I was using is now to long to reach the upper. I have a 73 dart sport with a 440. Anyone else have a similar set up know a part number for the upper hose?

So body shop can't seem to find my stainless for my front window so I need to find some. So let me know if you have any price and pics would be good too.

I can't remember who was suppose to look for some for me but car is coming back soon and I am look for the nuts that hold on the side markers on a dart sport. I tried others I couldn't find any that fit right and snugged down side market. Not sure nut is right work but hopefully you understand...

Not sure if everyone spotted this figure I would throw it out there for the guys putting new hemi's in a-bodies. Pricey but they made my 440 engine swap go so much easier, I am sure it will make hemi swap easy to. http://www.engine-swaps.com/Pages/ProductsYear/67.72aBody.html

Looking for the nuts that hold side markers on. My cars 73 dart sport. I know I bought some before and now I cant find them. Cant find any new ones the right size all to small. Need 6 total. I live in Mason MI 48854

http://www.energysuspensionparts.com/5.2105 I already did my rear when I did the swap. Got the full kit and these are left over. Kits is for the 1.5 eyes (not ss springs) Super easy to install press old bushings out and these slide right in just have to use the provided lube that will come...

I have a new hughes engine tall throttle bracket for sale. I bolted it on and didnt like it so I went with something else. Its for indy or victor heads. Its universal for cable you flip the smaller piece and will take stock throttle cable or the other way and will take a lokar setup. I paid $55...