Search results for query: *

MOPAR FORD GM: Air Conditioning Vent/Plenum Console - $250 (Smyrna, GA) This is a FrigiKing Air Conditioning Console / Plenum / Vent Unit in Excellent Condition. This appears to be NOS. I don't think it's ever been inside of a car, so it's probably all new. I am not sure exactly what it fits...

Located in Smyrna, GA 30082 Please see my EBAY Ad for this Truck. I have a 'Buy-It-Now' price of $9900, but am entertaining all offers: http://www.ebay.com/itm/141711422977?forcerRptr=true&item=141711422977&viewitem= Thanks for Looking. John P. note: Please Put 'D100' in any msgs so...

So here's the Situation. 1969 D100 Pickup (sorry A-Body guys, but you seem to have more activity than the Sweptline pages right now): Ignition Synopsis Note: The Wiring colors on the Ignition Switch Circuit on Sweptline (1961-71) trucks are different than Mopar Cars * 'ST' = Orange (med...

Has anyone used the Ford Solenoid Switch instead? I've gone through my collection of Mopar Starter Relays & just can't seem to get the SR to activate the Starter. I've got a Ford Solenoid Switch which just looks like a better design (2 hefty posts vs. the one on the Mopar SR). Also, from...

deleted

sorry, I posted two contradicting ads accidentally, so am deleting & will repost later. I apologize for my mistake.

Asking Price Options: 1) (4) 15" Jeep ALuminum Wheels (NO Tires) - $200 2) (5) 15" Jeep ALuminum Wheels (1 Very Nice BFG Mud Tire) - $250 * If you buy all 5, you basically get this $150-$200 tire for free! Need 'em gone. Gimme a call, PM or Email. Here's my Craigslist ad w/...

Ad deleted by Staff - Please read the Classified Rules before posting again.

I found a used Lincoln Weld Pak 100HD locally for $320. Would this be good for Sheet Metal, Frame Rails, etc? As you can probably tell, I'm a tad bit better than a Novice & don't weld a lot, but mainly want to do some floor pans. See Here: http://www.ebay.com/bhp/lincoln-weld-pak

I'm a real exciting guy...I get down on real compellin' topics like Broads, Booze & Ballast Resistors. Anyway, Here's my main question: Is there a benefit of switching from a 4-Prong B/Res, to a 2-Prong (or vice versa)? I ask because I've got 2 small block vehicles, both w/ the Orange Box ECU...

Just Curious, does anyone have (or know of a link for..) a wiring diagram (specifically a 72-76, or equivalent A-Body model) that shows the Values on the diagram (i.e- what the Voltages, Resistances, etc for each wire/component/switch/etc. should read when testing w/ a M/Meter). For example, it...

Well, not a Mopar, but it is a real vehicle: I give you the Dacia Duster Police SUV (Fugl-eee). Scroll down to about 2/3 down the page.

1967 Plymouth Barracuda Formula ‘S’ $12,500 Atlanta, GA Great Shape, Less than 3500 miles since Recent & COMPLETE Restoration See this link for Photos: Picasa Web Albums - archlab007 See this link for Detailed Description & Condition: Picasa Web Albums - archlab007 As you...

I have a 1969 D100 w/ a 318 v8 bolted to a 727 Auto Trans. The Tranny's fwd gears gave out (I think it still goes into Reverse, though). Anyway, I wanna find another 727 (or a A518?) that I can just bolt in (I'll pull the orig & rebuild it). In order to do this, I'd like to know what the...

As usual, I've got another one for ya'll. I might be inheriting a 90's model BMW 7-Series & got to thinking: I wonder how an Independent Rear End (IRE) would fare on an A-Body. I'm sure that the BMW Rear is just a playground for all kinds of compatibility issues, but maybe it...or an IRE...

Since I've found that there are some later (like 1990s & up) parts that swap onto A-Bodies pretty well (such as the smaller, lightweight starters from an Intrepid, a Jeep Rear end for Rear Discs, or a Denso Alternator (w/ minimal mods) or even a GM HEI distributor) I thought about the topic of...

Anyone know if there are any markings or numbering on a Manual Steering Box which will tell you which one/ratio you have? I am gonna look at a box in a junk yard, but don't think the car in question has a steering wheel - but I can get into the engine compartment. Tanks....

Anyone here do any racing that involves curves, rallying, or (please forgive me) 'driftiing' in your Mopars?. I'm really interested in suspensions, so I'm not as interested in Drag Racing, although I love to watch people who know how to do it. I'd like to take some first, novice steps. Any...

If you can meet this challenge, then I will pull my 318 & do a /6. Can you meet these specs? Can you Beat these specs? Slant 6 Engine * Spend $0 -to- $1500 MAX (Use stock, used, or off the shelf/east to get parts - not necessarily fancy or HP stuff, but could be as long as it...

Hiya Everyone. This refers to a 1968 Barracuda (318 / 4Spd) I want to totally refurbish my Power Steering BOX & PUMP. My question: Will this Kit accomplish both? And, if ya'll have any input on doing these rebuilds, I'd love to hear your thoughts. And, if there is a better kit, please let...

MOOG K-787 NOS, Never Used, Excellent Condition, but no Dust Boots Sold as a Set for $165, or make a reasonable offer (let's see if it works for us) Please see eBAY Ad for further details:http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=140589029751 Thank You

I've gotten my B/Cuda prepped & sanded. Now I'm about ready to paint. I'm pretty decent @ spraying, but really haven't done enough to feel like I can do a great job, just a decent one. So, in asking around to some friends, many of them tell me they've had good luck with the El Cheapo Paint...

NEW IN THE BOX: 1) IGNITION Switches [Wells #LS472] - $28 each 2) HEAD LIGHT Switches [BWD #PT 2706]- $32 each a) I kinda like the retaining clips on this model - if you've ever had your old wiring connector come loose, you'll appreciate this) b) Knob/ rod not...

ANybody tried this Swap? I looked up some specs & it seems that the A & M-Body Boxes are almost identical in appearance & specs. From another Webpage (http://www.dippy.org/forum2/index.php/topic,244.0.html), it is mentioned that the M-Body Pwr Steering Box has a 16:1 Ratio - Same as that...

As we all know, nothing just 'swaps =n= bolts' right in w/ our beloved Mopars. So, what is needed to go from Power Steering to Manual? My car is a 1968 Barracuda Convertible: 318/4spd. FWIW, I just converted the car over to post-1973 Disc brakes & Upgraded the Front End (Bigger BJoint UCAs...

If you know of some Mopar/ Muscle/ or just plain Cruise Nights, Shows, Swap Meets, etc around Atlanta (I'm in Smyrna) from the last week of June through whenever...well, post it here. Thanks

Hiya Ya'll. I think I've got a challenge - My Torque Converter (TC) for my 1967 Barracuda is Dead. This TC is the @!#!#! small Crank Journal/19-Spline (I think that's correct?) type, so I can't use my other 2 904 TCs from later 318/904s that I have laying around. My questions are these: 1)...

Who's got a recommendation & can the Rack & Pinion be done for less than $1000 (or better yet, for less than a Firm-Feel Box?) Also, are there some modern-day R&P parts from say Ram P/Us, or 1980s-2000s Mopars (or non-Mopars)? I once again call on ya'lls-z Mo-Brains!

Car & Drivetrain: 1968 B/Cuda Convertible. 318 from 1985 5th Ave. Stock, possibly Stock +1 cam, 4spd manual trans w/ 3.23 Rear End. Dual Exhaust...generally, moderately Hot-Rodded. Currently, I'm running a Road Demon 625cfm carb. I don't know my MPG yet, as the carb has only been on for...

Setup: 1968 B/Cuda Convert, 318 from a1985 5th Ave.4spd Manual 625cfm Demon on an Edlebrock Single Plane Intake, Cam seems close to stock, maybe a bit over it. Just converted from Points Ignition to electronic w/ the Orange Box. Situation: I just pulled an...