Search results for query: *

agree , mine came out /036-.039

don't know how old this posts is , but their running 8 :30`s and 40`s now...

Randy`s spoilers , someplace in Ark....

you must be ---- , depth gage works , dial caliper if your carefull , not rocket science never met anyone that couldn't do it right ... must be on you ...

taught to me by an 18 time national record holder : fill the valve relief full of clay , even w the top of the piston , roll the engine over in a complete /contiuous rotation , pull the head , take a razor blade ind slice the remaining clay in the pocket in half , "up and down" or vertically ...

pushrod deflection IS a big deal with dragracers hunting every last bit of horse power and needing longivity...

not as fast as rolling the engine over all at once , with clay in the reliefs , takes too long checking it degree by degre for me ...

I cut a set of pent roof hemi prostock pistons down to legal superstock height back when I switched to superstock , they bairly touched the heads at high rpm , Tom Hoover told me, (at a chrysler seminr, in OKC) , he gave) that is just right if it didnt cause any problems , just kept the carbon...

you need to clay check it , that way you`ll get the closest reading at the tightest of stage of rotation , fail proof !!

63 max wedge , red 2 door hard top , 63 max wedge black 2 door sedan , later on my dad bought a new 63 sport fury , not a max wedge tho. When I got out of the service , the red wedge owner (drag racer ) switched to hemi`s , super stock and then later prostock . I later found my first hemi in a...

Back in the day , Chrysler and most everybody else said , minimum of .080 on intakes , and minimum or .100 on exhaust . This was for performance engines (dragstrip) , but "DONT FLOAT THE VALVES very hard , if at all !!! I think you`ll have more than that to start with...jmo

wasn't it a 1966 or 67 Plymouth wagon , seems like I saw one being raced a lot of yrs ago , I always wanted to put my hemi in a wagon , just for traction...

they must be dreaming , $9000 , u gotta be kidding ...

I grew up outside of a small town , the next town away , an older guy bought the liteweight 63 savoy , the dealer (in our town where he bought it ) couldn't get it started , they offered him his down payment or what ever back , if he wanted it . He brought 4-5 big buddies of his to pick it up ...

dam rob ,you is pretty "smart feller '' Have you put it in an older dist. machine / wonder if that would tell you anything .-----just curious... ^^^^^^^ don't get those mixed up -lol

I went thru the same thing , ''reuse the stock ring ''. On another note .has anyone replaced one in a 68 fastback that had a Dana 60 with a chrome cover on it ? And where did you find the replacement sending unit ? The one I bought doesn't read right , not even made the same ....

was/did that from day one when it was new till I traded it , I think it was a condensation trap , never showed up in the oil ...?

that's nothing , I had a 2002 dodge 4 door p/up , that had the oil filter container up top , it always had way/way more than that from day 1 , traded it at 168,000 just because I was tired of it ...

I ain't sure I understand this , but you ain't gonna get nothing right unless the thrust bearing is right , surely its no 3 on that block too... you don't have the no 3 main in backwards do you ??

no big deal bend the u bolt to make it fit .

^^^^^^^^^^^^^^^^^ just a puppy !!! h/b/day anyway !

I have done nothing diff. , it`ll straighten itself out , may take a little bit . GOD is my provider !

mine was an older kit from who I don't know , advertised at 3/4'' , seller said they would not work on his a body , I had to hammer the frame rail carefully to get the front hangars to line up with the holes , the offset rears "were 3/4'' , I had already ordered a Dana 60 Detroit locker ...

I need 2 , if you wind up with an odd bunch...

did you special order the rims ? if so , from who ??^^^^^^^^^^^^^^^like!!!!!!!

no...

all the Chevrolets I`ve had had rust issues as bad as any thing else !!!

Pushrod clearance is just a thing with building engines that are not bone stock ...I ended up drilling my victor cnc`d knock offs with a 9/16 drill bit before I got clearance , but they use offset rockers too...just part of engine building .

Disagree , he has always been up front with me and very helpful , but their shipping has always been very high , other than that , I have been well pleased with them ...

---------------------------------------------------------------------------------------THIS ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^