Search results for query: *

ummm not sure it just says mr motion inside the cover. There is a picture of a 1970 dodge super charger on the last couple pages, it looks sweet. here are a couple pics i scanned the cover and the sweet car :D

hey guys i went to visit my dad a while ago and he gave me this book he bought a little after he bought the 65 cuda. I did some searching and i cant find anything about it on the net, it's copyright date is 1969 has alot of good info in it. Not a lot on the 273 it's self but it has a fair share...

thanks sig, i usually take it to about 5500 or 6k i will prolly look into changing the bell housing even tho i dont want to. Seems the only way to get something that will hold even after i make more mods to the engine later.

it's not original but close to it, thanks for all the info. I plan to call a few shops to seeif they can beef up my stocker or build another. How high is thesafe rev limit for the 273 commando? i rev mine all day long to 6-6500 rpm runs like a champ.

oh yea even the 10" i couldn't find a hp one for at summit and jegs but then i might not have been looking in the right places.

must be a 9.5 then, i know it didn't get the right one at first when i replaced it. All the sites list my car as having a 10.5" and the 6 cyls having a 10" which i figured they used the same clutch for my cuda. I have the 273 commando in my 65 cuda with the 833, i love it but with simple...

i was wondering if any of you guys have one and if so where and how much ? I want to keep mine as original as possible so i dont want to change the flywheel and bell housing. I tried searchin but i couldnt find anything.

ok here are the pics of it works like a dream and here are the part numbers 2-2-349 flange 5-785x u joint 5-788x u joint 2-3-8001kx slip yoke 2-40-1531 slip stub 28-30-62-7400 pipe they used got mine done and joint clutch and gear of saginaw mi and i must say the guys do a...

well guys my ball and trunion in my 65 cuda ended up going bad after sitting a very long time and the boot being ripped. I tried many times to find a replacement and finally found one on here. The thing that stopped me from keeping it that way was i dont know how long the b&t joint will be...

i wanna see if it looks like mine for the most part, if anyone has pics of one ouf of the car that would be perfect. thanks

i was wondering if anyone knows if certain years of the a bodied cars booster will work in certain years? I have a 65 cuda and i need a new booster, i ordered a new one for a 67 to see if it will fit. Finally got the old girl out after a year or more man do i miss that car :D just need to get...

yea yea we got some weird named towns :) the one i work in is pigeon the one 5 miles away is elkton :) I was beating on it a lil but i'm sure he didn't care. The chief said that he is prolly gonna buy that car when it's term is up, he likes it that much. I'm an average mechanic and tech guy ;)...

lol no the chief is a mopar nut ;) super nice guy kept saying that that car is gonna get him in trouble

i usually get to work on the county cop cars doing new cars for them and service on the current ones. I got a call from the city cops asking me to fix and add somethings, here is what i got to drive ;) and oh yes she is a hemi :D i was pretty impressed with the power of it and it was a very...

yea pretty sure the cover on the back is the roundish cover and has 10 bolts it looked nothing like my 7 1/4 much bigger pig the back plates for the brakes were way different than mine and so were the drums. I don't know if that helps but i was just going by what i found on here. I bought it to...

hey guys looking on good ol ebay i found what was discribed as a 7.25 was actually a 8.25 out of a 75 demon. I was happy to see that it's an 8.25 but i dont know exactly what gear ratio is in it. I took off the cover to look and it's an open diff and had numbers stamped on the ring gear the last...

ok that is what i was wondering, thanks guys i'll just have to look around and see what i can find either for a custom 10" or a custom 9.5"

i wanted to try a bigger clutch disk and the same pressure plate, i know that the 10.5" pressure plate won't fit i had one accidently ordered and it was too big of course.

i want to keep my flywheel and bell housing, can i use a 10.5" disk with a 9.5" pressure plate? has to be something i can do.

does family count :) my dad had my 65 for 37 years(sat for 20+yrs of that) i had it for the the last two years. He bought it when it was two years old and was the second owner.

hey guys i got a 9.5" clutch in my 65 cuda and it is slipping after i did some small mods, it was new last year. I have rode it kinda hard but i have a feeling the clutch just can't handle the power of the car now. I only have small mods done to the 273 commando and when i shift from first to...

I love my 273ho, i just rebuilt her but need to take her apart again and replace the head gaskets. My compression was lower than it should be and i thnk the head gaskets might be to blame. Also i want to check everything out to make sure nothing is damaged. I had the heads completely rebuilt...

Hey guys the brake booster in my 65 cuda is going bad. I noticed that it has bolts holding it together, is it possible to rebuild one? Or if i have to replace it where do i look? Tried a local autoparts store and they couldn't get one for it. Any help would be appreciated

Mine vibrates too if i push up and down on it it moves. seems tight when you get the shaft close to the front of the flange but when it gets where it usually runs it is lose. thanks for the link. I just saw a kit on ebay goint for 115 but it's cheaper on that site. Also they sell the whole darn...

yep and aaron's is the bre z, your z is kinda hard to forget. It'll be good to have you on the board.

welcome and you know i have seen your car at a z meet Mine is bright orange and it's turbocharged.

i'll look for a book on the carters i ment the priming jets or tubes in the top of the carb. Goody hit it on the head tho i too think it was a heat thing making the gas come out.I miss fuel injection :(

hey guys need your input and any advice you have. I have a commando 273 in my baby with the 4sp. My dad upgraded the cam in the old girl a while ago and he doesn't rememeber what it is. My question is when trying to tune the carter for more fuel what has to be done? I'm thinking bigger jets but...

woops

Ya i found there is a connection between the amount i have been pulled over since i have been doing these cars and the amount before.