Search results for query: *

Hey guys, I installed a 4-speed in my 70 dart with a 440 motor. I can not pull the car out in 1st gear after the car is hot without a vibration so bad in the car you'd think the windows are going to pop out. You can pull the car out in 2nd gear if ya slip the clutch without the vibration. I am...

I need a 4 speed shift handle for my 70' Dart non-console with a bench seat. I was told by Wayne from Brewers Performance that 68'-74' only with bench seat will fit. Let me know what ya got with pics and price. Thanks....

I'm looking for a hurst shifter mechanism, shift mech. mounting plate (I believe its a hurst part #6350), shifter handle ((bench seat))and rods. All parts for an A Body. I am installing the 4 speed in my 70' Dart with a "bench seat". If ya got any of these parts ya can part with please PM me...

Hey guys im looking to buy a 4 speed for my 70' dart with a 440 motor in it. I recently had discussions on whether i need to buy an 18 or 23 spline A Body 4 speed?? I was under the impression that i needed the 23 spline but now im second guessing myself. If ya know let me know??????? Thanks Dave

Hey guys Im still searching for an A Body (Non Overdrive) A833 4 speed and all the parts for an install. I need it to fit a 70' dart. My car is a BB (440). I need transmission, clutch/brake pedal assembly, Z-bar, shift rods, shifter, shifter mount, bell housing for 440 and anything in between. I...

I need a 4-speed setup for a 70' dart. I have a 440 motor out of a 72' Imperial. I am looking for a complete setup from the transmission/bell housing to the pedal assembly and all the parts in between needed for assembly. I am willing to travel if you have enough parts at a good price. Let me...

Im looking for a steering column for my 1970 Dart. Im installing a 4-speed in the car and my column is automatic. The car also does not have power steering. I live in Irwin Pa. 15642. Any help will be greatly appreciated. Thanks Dave I also may need the transmission...

Im looking for a pair of stock valve pans to fit 72' 440 engine. Im trying an experiment with them so im looking to pick a pair up for as little as possible. Im going to etch them with the Mopar Performance Logo and if all goes well it will be an engine compartment addition that will look...

I'm looking for a go wing for a 1970 Dodge Dart. I need all the mounting brackets also. I'm in Irwin Pa. 15642. Thanks

Hey guys, I got a 70' dart with a 440 that has been bored .030 with a mild cam and a Edelbrock performer RPM intake. The cam was described to me as being like one step over stock or a "RV" cam. I'm not super mechanically inclined when it comes to tuning engines and carbs. I currently have a...

Hey Guys, My problem is that my car surges forward when I'm stopped and the car is running. Its not real bad but definately noticable. I adjusted the idleing down which helped but can't go any futher or it stalls in gear. I also noticed that when I'm on the open road my car acts as though it...

Hey Guys, I got a few questions about my 70' Dart Swinger. It was a 318 car but now with the 440 I need a little more stopping power. I had it out today on the bypass and when I touched the brakes at over a 100 mph it was like there was nothing there at all!!!!!! That will not happen...

Hi Guys, I got a question about my 70' Dart. It has a 440/727 motor and transmission combination. I noticed when I had it out this weekend that at stop signs and red lights the car surges forward with my foot on the brake, if I kick it up into nuetral or park the idleing goes right...

Hey Guys, I have a 70 Dart Swinger that I've re-done and I've found a problem that I can't find. Every time I wash my car I have a "little" water on both the drivers and passengers front floor by the kick panels on the carpet. It's about dead center on the kick panels. I've looked everywhere and...

Hey guys does anyone have or know where I can purchase a "new" 1970 Dodge Dart hood emblem. I called all the vendors Yearone-Paddock-Herbs Parts-Laysons-Hardens-Mega Parts and more and they all told me they are on back order until around June of this year. I had a new one that the body shop...

I'm looking for a AM/FM factory radio for my 70' Dart. Hopefully clean and in good working condition, if anyone has one laying around please e-mail me at [email protected]. I live in Irwin Pa. 15642. PLease send pictures and shipped price to my e-mail. Thanks 440nika if you need any...

Hey Guys, I got a 70' Dart with a 440 and I'm looking for the best carb. that would be an easy install and get pretty good fuel mileage if that's possible. I currently have a 750 Holley and I can not get this carb. adjusted so that it won't miss while pulling out. After pull out it...

Hi Guys, I have a 1970 Dart Swinger with a 440 motor and 727 transmission. The motor was bored .030 with a very small cam installed (a step or two over stock). The rearend is a 3:55. I'm NOT RACING the car at all, I'm using the car as a weekend driver and driving it to different car shows within...

Hey guys, I'm looking to buy a set of HD rear leaf springs (prefer 6 leaf) for my 1970 Dart Swinger. My stock springs let the tires rub the body when driving the car and I drive over a bump in the road. I'm looking for a set of springs that will put my car body about an inch above the tire. I...

Hi Guys, I got a problem I can't find!!!!!! I've noticed the last couple times I've washed my 70' Dart that the carpet is just a little damp at the bottom of both the passenger and drivers kick panels. I had this Dart completely tore down to nothing and put back together with all new gaskets and...

Hey Guys, I'm looking for a good leaf spring to install onto my 70' Dart that will give me a couple inches lift over my old stock spring height. I'm trying to get a ride height where my body sits around the top of my tire tread, if you know any companies and prices please let me know. Thanks...

Hi, I just purchased this thinking I was buying a rear wiring harness for a 70' Dart Swinger but it's not. I know from the connectors it's from an older mopar maybe same time era but not my Dart. All the rear light sockets are seperate (the two outer rear light sockets are 2 wire and the socket...

Hey guys, Over the past couple years I've accumilated a lot of extra parts while working on my 70' Dart (about 100 or so). I want to start cleaning, checking and getting them ready for resale but I am trying to find somewhere I can check each part number to know exactly what years and models...

Hi again guys, Hey I just took my intake and valley pan off to be powder coated by "CudaChick" from here at FABO. I noticed when I took my valley pan off I had a very small amount of oil on top the valley pan and a very small puddle right beside the oil sending unit on the back of the motor (72'...

Hey Guys, Does anyone have an extra rear wiring harness for a 70' Dart Swinger laying around. I previously posted a forum about my rear brakes and reverse lights not working. My pedal switch is good but I don't have any power at the rear lights. I followed my wiring harness towards the front and...

Hey Guys, I purchased a new Edelbrock RPM performer intake for my 440 and I can't figure out why after just about 10 hours of total running time my intake seems to be discoloring. It has got like a brown tint over the entire intake and to be honest it looks old on top a freshly done motor. My...

Hey guys, I have a 70' Dart Swinger that was tore down to nothing than rebuilt, after the car was all put together I have no brake and reverse lights. I've checked all wiring connections and fuses which leads me to you guys!!!!!!! Could there be a ground somewhere in the harness that I either...

Hey Guys, I realize what I'm about to ask is probably very hard to do if not impossible. We are going to take my car to Keystone International Raceway this spring in Pa. just to find out how fast it will run the 1/4 mile. I don't know alot about the exact parts that was installed into this motor...

Hey guys, I put a 440 with a 727 trans into my 70' Dart now my speedometer is off. My tire size is 245-60-15 and my rear gear is 3:55, according to the chart in the Yearone catalog I'm looking for a 36 tooth (RED) gear. If anyone has one or better information on how to make sure that I get the...

Hey Guys, Does anyone have and old windshield wiper wiring harness with the electrical connector for a 2 speed wiper motor off a 70' Dart? Mine has a broken wire just as it goes into the connector from the wiring harness, if you got one I need the connector with about 6 inches or more of the...