Search results for query: *

Hey, In the process of redoing everything under the dash and I’m looking to get the parts I need but want to check with some things. I’ve searched extensively and I will post my findings to cross check. The car is a 1973 dart swinger. Original slant six car with a built 408 stroker going into...

Ran into a bit of an issue with my building hoping I can get some help from yall. I made my steering column from a column shift to floor shift by shaving it all. Now putting it back together it seems like I need some screws that go inside of it holding it together. Not sure if anyone happens to...

Single barrel sir cleaner off a 1973 slant six $25 local pick up in Staten Island.

I have two radiators I don’t have use for. Neither of them leaked when I took them out they been sitting in the trunk of the car since then One is out of a 1973 slant six a/c car the other is out of a 76? Aspen wagon that I used as a donor for my 360 that car also had a/c hooked up. Any...

Cleaned out the trunk of the dart of stuff I don’t need trying to make room for the new. Before I toss any of this wanted to make sure no one needed anything. $25 each or best offer pick up in Staten Island or Brooklyn NY not really interested in shipping. Some of this stuff was off the...

Hey just pulled the factory 7 1/4 out of my 73 swinger. Large bolt pattern car No known issues that I am aware of but the car hasn’t been driven in several years. $100 or best reasonable offer by the last week of February. I have a party in my yard first weekend in March and need it out of the...

Hey all. Found a speedway fabricated ford 9 in for a good price I might not be able to turn away. The car I’m looking to Put it into as a 73 swinger. The model of the axle is the 56in version as show in this link. Speedway Ford 9 Inch Rear End Housing Kit with Axles, 56 Inch Being that I’m...

Hey. Been searching for a couple days and haven’t come up with any results. I have a 1973 dart swinger originally a vinyl top car. I’ve gotten rid of the vinyl top and I’m looking to take out the front and rear glass to clean everything up since some fragments of the top are still in there and I...

Looking for the front section of a passenger side floor pan for a 73 dart swinger if anyone has any laying around. Thanks. Located in Staten Island ny.

.40 over pistons 360 La. Thanks to the forum I have now found out they are badger cast pistons. my engine builder told me they would be for about stock compression build. In good shape no issues when they were in the motor I just went with a stroker kit. I can ship on buyers dime but local pick...

Used thermoquad for sale. Ran when I bought the motor. Numbers are included in the picture. No other known history. Came off a 360. Local pick up or shipping on buyers dime. $95 or best offer. Thanks.

Stock 360 oil pan. No known issues. $40 local pick up preferred. But can ship on buyers dime. Stock crank. I’m good shape $50 or best offer local pick up to heavy to ship Stock timing chain cover $50 or best offer local pick up or shipping on buyers dime. Has some wear from where an impeller...

Edelbrock performer intake for sale. Had some bad port matching done to it prior to me getting it. Worked when it was on the motor . I went with a single plane and no longer need it. $125 or best offer. Local pick up preferred but shipping is probably possible if necessary. Thanks.

Got a set of 73 360 la heads. Included is a bin of the rockers lifter valves springs and everything off them. Also the camshaft that was running in the engine. Unknown specs. Motor ran but the heads needed work, ended up using the block to build a stroker with trick flow heads. $150 for...

73 bench seat up for grabs. Needs recovered. All hardware included $75 or best offer pick up in Staten Island New York. Seat belts not Included

Pulling the whole K frame out of my 73 dart swinger. Original slant six car, I doubt the shocks or torsion bars of much use any more but it has control arms spindles and complete big bolt pattern disc brakes. I’m interested to sell it all together one package deal come take everything sell off...

Hey all, got myself an interesting (well interesting to me) brake set up. The car that is going to be built is a 73 swinger. Hdk front suspension with a narrowed ford 8.8 in the rear. I’ve managed to get brackets to run four piston brembos front and rear off a new Camaro, and 13.5 corvette...

Getting ready to start my build. I have a slant six with automatic transmission ready to be pulled. Not sure on the date it will be pulled but hoping to find a buyer so we can arrange pick up on the day or day after I pull it since I have no storage for it. More about the motor and transmission...

What’s up guys and gals in the process of getting parts together for the swinger. I know the best way to determine is to measure and see but the car is in pieces and i can kind of set up things to make things fit if necessary. To start the car is a 1973 dart swinger. I am going to run a ford 8.8...

Crazy long shot question here guys. I bought a 360 from a guy a few years back, slightly built motor, but he lost the camshaft specs. These are the markings I that I see in it just wondering if anyone had any clue on what it could be? thanks a lot Mike

***EDIT*** car i was looking to replace this with fell through so not going to sell it at this time and hold onto it. Thanks. Hey guys might be letting go of the swinger. Saw an ad for a 68 dart I’m going to look at tomorrow which means the 73 would need to go. 1973 dart swinger slant six car...

http://newyork.craigslist.org/jsy/pts/4684478489.html hey guys and gals found a set of wheels on craigslist that are just about what im lookin for. I was looking for 17 or 18 inch wheels but found these. I know alot of members run the 17 and some the 18 inch mustang wheels but these are new...

Hey, I recently decided to go away from using the slant six and bought a 360. I however have put some parts into the slant six that I'm looking to sell. I also have all stock slant six parts. They are off a 1973 dart swinger 225 slant six. Here are the new slightly used parts less then 100...

Hey Guys, I recently picked up a 76 volare wagon parts car. It has the folding rear seat and that has me thinking. Has anyone every put a folding rear seat in a swinger? I know I have all the parts so I could make it work but has anyone every done this, and documented it. Or would it be...

Hey guys, I recently bought a 1976 volare wagon for the drivetrain and plan to put it in my dart. Once I get the motor out of the wagon Im going to be cleaning it up with my cousin, whose a mechanic, changing the gaskets giving it a coat of paint etc etc. The motor that came in the car is a...

Hey guys and girls, haven't been around much and my dart has been sitting but now I've stumbled across something that's going to breath life back into the project. Currently i have a 1973 dart swinger with a slant six. Most body work is done but the suspension needs work and the six has saw...

Airbrushed and clear coated glass bottle, $25 shipped to your door. bottle is about 5 inches tall, not sure how else to describe it, check out the pics. More to come, and custom designs available if there's an interested in these. Thanks, Mike

Hey Guys I'm looking to for a used flowmaster 40 series muffler. Im looking for one real cheap no more then $40 shipped. It doesnt have to be perfect Im just looking to put it on my jeep to replace the one on there now that has a hole in it. Let me know. Thanks Michael.

Hey guys and girls, I need your help! Im testing waters with my car. Let me first clarify that the car is NOT for sale and I will NOT sell it. I am putting my car up to see what the value of this car is. The main reason I am looking for a value is for insurance reasons. So if you guys can do me...

Hey, I was wondering what type of custom painted things you guys might be interested in. Previously I painted picture frames and those sold OK, and now I was trying to sell vanity license license plates but they arent selling at all. What I was wondering from you guys is what kinda custom...