Search results for query: *

anyone have a part number for the male pins used in the steering column connector. rewiring my car and want to replace the pins to keep splices down to a minimum.

Has anyone installed a classic industries abs vinyl headliner in there car. Do I need to put my windshield back in before pulling the gasket back over the headliner? Then did you also have to trim the headliner to fit correctly in the front corners so the gasket lays flat and not rippled. 72 demon

Should I be using an adhesive when installing my windshield? or just rely on the rubber to leak and hold glass into car if in an accident?

I had my dash repaired and they cant get the texture proper. What is everyone using to retexture your dash pads.

Anyone good with wiring relays. I got a spdt relay I want to wire up. I know how to wire it but want to see if can wire it differently. I know current flows from terminal 30 to 87. But I want to wire it so current flows from 87 to 30. That way I can wire 30 to the one point with 2 different...

I'm replacing my wiper switch with a push button switch. I know that will only give me one speed but that's fine with me. I dont drive the car in the rain as it is but still want a wiper just in case. So heres my what I need help with. It's a 2 speed motor and need help with what spade is for...

im redoing my dash and getting rid of the stock switch and making it a push button. would there be an issue with running my instrument lights, marker lights, and head lights off one switch with relays? basically i want to push one button and it turns on all my lights. headlight already has...

Got an Qft ss-850 crab with mechanical secondary. The carb works great except for a slight hesitation off the line. Change the squirter size up 2 size but still have the issue. When I move the throttle the pump arm moves instantly and I get a shot of fuel right away. I'm running a pink...

i need the change the brake pedal ratio but i need some help with it.. right where i need to drill my hole is the bend in the pedal lever to take it around the steering shaft. also my hydro boost is mounted where the original Mc was making the push road to angled down. with it angled down will...

I have had mu hydroboost for some time now and we really like it. Theres just 2 issues with it that we fixed but I dont think its proper and would to redo it making it proper. Out issues are that the brakes are very sensitive and the steering is very ight feeling. Now what I did to fix the...

So I'm replacing the trunk extension panels in my 72 demon. How do I remove the brackets that are attached to the extension so I can replace the entire extension and not cut and splice

Replacing the 3 pans in the trunk. Do I need to brace my truck before removing the floor panels in the trunk?

Once i get my floor pans replaced what's the best way to stop rust from coming back and stopping already exist rust before it get bad.

I need to replace the floor in the trunk on the 72 demon. How do i remove the old and install the new. It looks like theres an adhesive holding it all together.

I'm replacing the stock steering joint with a u joint style. 5/8 36 spline. The new one is said to be 5/8 36 spline but It wont slid on. Any tips on getting it to slid on. it's a power steering gear box

72 dart original 340 with a 408 stroker now. The torsion bars are also original. No idea of the dia but I would like to replace them. What size should I use. This is mostly a street car but also set up for strip.

where can i get a steering u-joint for a 72 dart.. and what size do i need? Power steering

I need some help with my fuel sending unit. More like options. I have a autometer fuel guage that's non liner but my sending is linear so the guage does not read correctly. Now I have tried the metermatch didnt correct the issue. Got a second meter match still didnt fix the issue. What...

i have a 72 demon and im replacing all my bushings but have no idea how to get the strut rod out and what torque spec.

i got a set of RED Polyurethane Rear Leaf Spring Bushings. would like to get 50$ free shipping. Energy Suspension: Polyurethane Rear Leaf Spring Bushings For high performance applications, the combination of heavy duty or performance leaf springs and HYPER FLEX performance polyurethane spring...

looking to replace bushings on our 73 demon. wheres the best place to get them and will replace everything. looking to go with poly unless there is something better

i have an issue with my fuel pressure.. i have a holley black electric pump and a qft bypass regulator. i cant adjust my pressure below 8 psi. i took the regulator apart and all was clean. fuel pump was clean and found to have no issues.. before we had good pressure but we had to change my...

Need a good fuel pump. My electric holley black doest want to pump anything more the a few psi. So what's a good brand and one that's not loud as hell

i rewired my car with a, EZ wire kit and it came with a 10g altnator bypass wire.. now is the 10g wire going to go big enough to handle my alt or should i go bigger.. keep in mind i also have a 12g wire that comes off the rear alt post that was wired into the kit. my alt is 136A. what size...

im having issues with my gauge reading wrong. so i bought a meter match and i set it up as instructed but its still not reading properly. when i set it up it was working and was spot on. but not it says is full when its less then half a tank. anyone else have these issues with meter match or...

where is a good place to fin dodor and trunk seals for my 72 demon

what headlights are the brightest. looking for LED, HM, or HM bulbs and replace able lenses. also how do i align them

what fan shroud did everyone use when they did there 5.9 magnum swap using the stock fan, pullets for the magnum?

would you trust sealed power lifters on your 500+hp engine.

anyone know of any issues with the holley black lable fuel pumps? mine isnt giving me reliable pressure even with it on a regulator.. it reads 7psi a few months ago with my new carb install. then last night it was reading 2 psi so we adjusted it back to 6psi.. then after turning the car off and...