Search results for query: *

Just noticed light exhaust ..smoke comming off the left bank(left exhaust pipe)It is in a 72 dart,318,4bbl ,headers. Engine was rebuilt about 4 years ago. The right side has no sign of smoke. Ideas???

Recently bought a 64 ford fairlane as a project. Still have my 72 dart and NO plans to get rid of it. Have not been able to find a good web site for info.(like FABO) any one know of a good web site?

Thinking of installing intelitronix gauges in my 72 dart while it gets a new wiring harness. Any one use or know anything about intellitronix? USA made, lifetime warranty, good price. Comments please? Thanks

72 dart 318/904. Went to a car show sat.,sat in line 45 minutes,did not shut off engine. Temp. gauge never showed over 1/2. Car died and would not restart. Trailered it home and found the coil was bad. Coil was new one year ago. Would excessive under hood heat cause that? Show was great had 400...

72 dart 318/904. Replaced speedo. cable a few years ago(less than 1000,miles). Odometer(miles driven) works good.Speedometer needle bounces around while moving. Driving from shop to house(50ft) it reads 50-60 mph. Car is going less than 10 mph. Does it sound like the head is bad? or thoughs...

Need to redo an intake bolt(oil leak) It is an edde. performer 318/360 Torq spec. are 25 ft. lbs correct? i dont want to mess it up Thanks.

Are the rear window molding clips different from front windshield clips? Having trouble getting the rear molding on. Tha classic catalog showes what appears to be different front and back molding clips. Mine are the same front and back.

found a 58 dodge panel for sale. Where would the fender tag be? looked on both fenders(under hood is VERY dirty) found nothing.

Just replaced the federal p/s pump on my 72 dart(v8) Are you supposed to jack up front end,turn steering wheel once left then right(lock to lock)? if yes,should engine be running?If this is NOT necessary let me know. Thanks

Is the pully on a federal p/s unit threaded on or pressed on? It is off of a 72 dart v8.

I need the wire for a fender mounted turn signal on a 72 dart. It is about 15" long.

I need the wiring for a fender mounted turn signal (for 72 dodge dart It is about 15" long)

I see adds for hood scoops with adhesive to hold them to the hood. anybody tried this method? I have my doubts . Thanks

Finally got everything right (dont ask) epoxy came out good.First time using a spray gun.Had about 45psi at the gun. A real learning experience.

I am using nasson epoxy and activator. Do you mix 1to 1? After mixing should you let it sit(above 70degrees,30 minutes,below 70 degrees sit 1 hour)? apply second coat of top coat primer within 24 hours? (never heard that before) First time doing this SO bear with me.Any helpful hints are WELCOME.

Finished sanding my 72 dart. Used 80 and 120 grit paper on a da sander.What weight paper should i use before i prime it?? All paint is removed now.

I have a 72 dart with a 73 rear axle(8 1/4 i believe) Replacing the rear shoe and the replacement shoes do not have ROUND hole for the parking brake pawl. It is oblong with a slight round on the bottom only. These came from carquest and local auto parts dealer. He tried several brands and all...

I have a n edelbrock performer intake on my 72 dart w/318. I have a coolant leak in the front(above the timing cover) I will replace the intake gasket. My question is ,do i have to use edelbrock intake gaskets? There are several brands available,dont want to do it over by saving a dollar. Thoughts??

Trying to remove the panel under(behind) the rear bumper. The top bolt goes in from the inside(i can see the back side from the outside). How do you get to the head of the bolt? It appears to be in the opening between the trunk floor and outer quarter panel. The body and chassis service manuals...

Just finished removing all paint (and small amount of body filler) from my 72 dart. Used 80 grit paper on a da sander. Should i sand with 120,or 220 paper before i put on epoxy primer?

72 dart,with tail light on apply brake pedal brake light comes on tail light goes out. Changed bulb same scenario. Ideas??? Opposite side works fine.

On my 72 dart 318 coil in stock location,removed it yesterday to clean it up. The wire coming out had light oil on it. Pulled it off and saw small amount of oil inside. Is this a problem? is this normal? Car runs fine like it is. Thanks

Just changed oil in my 72 dart/318. Put 5 qts. in ran engine a few minutes waited checked and it is about 1 qt. over full. It has a short filter on it because of headers. I know 5qts. is correct amount for the engine. Should i drain some out? is the short filter why it is over full? It is a new...

I am thinking of buying a ramcharger/trailduster. Is there a good website(like this one) i can join and learn more about them?

Will a hood for a 72 dart 4 door fit a 72 2 door. I have a chance to get one locally and do not want to get it if it wont fit. Thanks

is it possible to use 16" wiper blades on a 72 dart? It currently has 15".

Getting all my needed stuff together so when i paint i have everything . Paint gun says clean with solvent(epoxy primer). Is solvent paint thinner? or something else?

P/O removed vinyl top. Roof is pitted all over. None LOOK deep. Will epoxy primer cover the holes? Is it best to just light coating of body filler the entire roof? Did small area with filler and it came out nice.

Need about a half dozen window trim clips for a 72 dart(rear window) I know venders have them. Looking to save a couple bucks. Thanks.

Will a 73 dart bumper fit(unaltered)on a 72 dart? I found a nice 73 rear bumper (good price)and want to be sure it will fit my 72 dart. I would have a family member pick it up thats why i need to know.