Search results for query: *

Well I've been chasing a miss at high rpm and a random pop thru the exhaust. It has been months no kidding. Changed plugs two times,wires,coil, ballast resistor,had my carb gone thru by carb shop. At the same time had a cooling issue but solved that to the forums helpm me out.so today me and my...

1998 dakota r/t 160k miles bought from member here.i only drive 1 time a month.i love it but u have to let go sometimes I guess. I out new brakes all around, new tires, new plugs wires, cap rotor.truch has headers and tuned.located in so cal menifee ca 92584. Need to get 3k firm for it.

I have a low mile 73 duster stock 318 I want to supercharge it from the supercharger store. I have a good fuel system, meth injection Question is can i run like 12 to 15 lbs on d1sc on the stock 318 with good tune? Because I have a 360 on the stand and don't care if I blow the 318 up. I also...

Ok took my valiant there 2 weeks ago to work out bugs on the dyno. We couldn't get it to run right had some sort of ignition or wiring issue. But picked up 40 rwhp so that's the positive. My front seal starting pissin oil so we stopped . I had to leave it there for a few days and he said he...

I called mike today, he was really nice and he helped me with my new roller set up with proven dynoed combos that work.he knew I wasn't gonna buy today and he still kept a great conversation and ensured I was pleased, and that all my questions were answered. He was in no rush . He's the real...

Ok my car on the dyno decided to mess up one of my exhaust valves are stuck so I'm gonna tear it down again ported eddy heads, 11 to1 408 stroker... So since I'm going to tear it down again, what do u think I should run for a roller cam set up. I have a shop built carb, ported victor intake...

Ok 318 with cam, mopar dis with orange box stock not recurved...when I put my timing light on the balancer where do I want to set timing. 10btdc? Any input would be nice I'm just slow on the tuning stuff I can wrench but timing I'm still new my race car is locked out so its easier..lol

Can someone send me a link of the tool I need to cut it properly braided fuel line, thanks

Ok I was having issues with my car heating up. Well turns out my fans were pushing instead of pulling. So now it ran 180 /190 degrees beating on it on the dyno. So my issue is fixed 4 months of changing thermostats and dealing with drama. Thanks for all ur info.mthe champion set up I got from...

Ok my car still needs dyno time eddy headed 408 Question I have a hughes 3500 in it on the dyno it's flashing at 4200 . Does that mean its on its way out?..or is it a bad batch of converters. My buddy said its hurting hp he said I might want a tighter one so I can get more operating rm out of...

Couldn't finish up today will have final number tommarrow when we finish. 387 hp, 375tq and running pig rich teaser post sheets tommarrow eddy headed 408 small hughes cam Plymouth valiant 408 stroker - YouTube

I have a stock 318, headers, and I out a 4bbl on it. The only one I had was a650 dp.i know ots too big but thats what I had future pkans is roller 360 so thats why I have that and cbu in socal is gonna go thru it before I put new motor in Ok what do u suggest as in squirters, jets I should...

I went with champion radiator, duel ele fans, still ran hot took thermostat out now if it still gets hot wtf do I do know its a drag car. Maybe ele water pump? Timing is at 36 degrees motor is fresh from Dougans in SoCal. Any ideas would be cool I had a 180 tstat before .just thro me a bone plz

Well a little back round I got blow up in Afghanistan had a bad t.b.i. So my brain works weird now to my question A 318 motor I found tdc now can someone plz plz walk me thru step by step what to do to get the car started. Books aren't helping. I just need someone to walk me thru..where the...

Holley 650 dp street avenger series no run time need bigger , located menifee ca 300 plus the ride

1973 duster 318 (till I put in 360/380)..is there a bolt on modern ac compressor so I can ditch the old bulky one. Everything works but just want to put new style one on the car.or can u send me links with pic on how to do so. Thanks

Going to the track ib 2 weeks. My car runs good im gonna mess with the jets. I have 408 stroker ,Braswell 950 carb the jets are 84 square. U suggest gooing up or down first. And what am I looking for more mph

Assembling my 91 roller block, I have a full magnum top end...now can someone plz shoot me links on the proper head bolts u guys recommend. Thanks guys

Magnum top end, rockers, pushrods, intake, valve covers, bolts, heads not cracked and ported, didnt get a valve job or them flowed 400 firm local pick up only located in menifee ca Also have 91 roller Shortblock for sale 360 fresh rinhsand bearings. ...pm offers

Anyone ever used one seem light and cool? If u have post expierance and how did it act in pits like cool down I have altenator .but run water pump and fans for a few after passes

1971 plymouth valiant Ported eddy heads, Hyd cam, forged bottom end, ported victor intake, Braswell 950 carb, msd ign, dougs headers904 rmvb, 3500 vertor low gear12*point*cage*2*seatsMini tubbed 83/4 391 gears Detroit locker, 26x10.5 m/t slicks on it nowPerfect paint, all original panels and...

71 valiant pro street Ported eddy headed 408 stroker 11 to1 Hyd cam, forged bottom end, ported victor intake, Braswell 950 carb, msd ign, dougs headers 904 rmvb, 3500 vertor low gear 12 point cage 2 seats Mini tubbed 83/4 391 gears Detroit locker, 26x10.5 m/t slicks on it now Perfect...

How much would a magnum top end be worth, heads are ported, eddy intake, ,stock rockers, pushrods, roller lifters, lifter retainers.....??? Didnt get heads flowed yet but I am if would pay more for numbers

A body housing Located in menifee ca 400 obo local pick up plz

73 duster 2bbl 318, fresh 904 All suspension has new bushing Disc brakes in front Nice paint located in menifee, ca 6k firm my wifes grandpa was original owner

Victor 340 intake Sb Located in menifee ca First 200 takes it local only hit me up

I'm getting ready to finish up my 91 roller magnum build...can anyone tell me what a good budget valve spring..cam is the mp 501/510 magnum cam. I really don't want to pay 11 bucks per spring from mopar..thanks guys..

Ok plz list what oil holes or what I need to do to make my 91 roller block take my magnum heads .mto ensure oil thru pushrods

2.02 intake 1.60 ex Ported ready to run fresh valve job guides cut. Valve springs good to 600 lift Locals only 650 obo pic of flow sheet cant post pics but pm me ur email and ill send pics damn smartphones located in menifee ca

I run autolite 3923 in my eddy headed 408 11 to 1 motor only race gas.what do u think? Should I go colder or another plug instead car runs good just would like some input