Search results for query: *

Steve I got the car running and I was so anxious to start driving around I did not wire up the wipers yet. I was undecided as to use the original switch or purchase a new one. The reverse lights. I took power from the fuse panel, and ran it through the neutral safety switch on the trans. So 12...

Steve what did you do for a switch for the wipers regards George

I just rewired my car with the Ron Francis wiring kit. Very nicely laid out, you must read the instructions carefully, as many thing refer to General Mistakes vehicles

Hi this is the coil I just installed with my pro billet dist http://www.jegs.com/i/MSD/121/8222/10002/-1?CT=999&sendroicid=bbef8492-2d00-41d6-b158-38db0de2603c&sendroiad=1720130979&sendroikwd=MSD+8222&gclid=CJyc9Lfuh6MCFd1_5QodOQx7KA

Hey guys I installed these sockets, but they only have 2 wires, one for stop and one for turn signal. there is no ground wire the socket is metal but the housing is a white casted metal, and does not make a good ground. Does anyone know of a 3 wire socket that will fit into a 3/4 inch hole...

I will be in Richmond on Wednesday wish I would be closer to you. many thanks George

I have not been able to find a socket with 3 wires and a 3/4 inch hole I went to napa today, but they were not helpful

thanks Demon any ideas on how to ground those two wire sockets?

Hello I am rewiring the Dart in my spare time. I got the engine running two weeks ago, since then I have been away on business. Today I installed the autometer gages crank it up and the voltmeter showed a steady 14 volts. My question is the turn signal switch connector, has two green wires...

Hello all I came across something today, that drove me crazy. I am starting to rewire my Dart, and I have to match up the connectors from the ignition switch to the new system. I was looking at the wiring diagram which I got from my Mopar for the 73 Dart. The ignition terminal on the starter...

Dan thank you. The info you gave me the other day for the napa sockets for my turn signal lights for my Dart worked out great. I never heard of Standard blue streak, any ideas of what part stores they are affiliated with? thank you George

Hello All could someone please tell me where I can pickup a connector for a 3 prong neutral safety switch? thank you George Gerhard

Hello I found this on the MSD website. I am curious about the ready to run distributor for my 440, but I am not sure if it will fit when I change to aftermarket heads in the future. Does anyone have experience with that distributor? thank you George http://www.setyourtiming.com/video.html

oh it is a 440 engine

Hey All what is a good vacuum advance distributor to use with a MSD 6al box. I noticed some of these distributors are very tall, what do they offer? thank you George G

Hello Alll Dusterdown what did you ask for at Autozone? Do you have a part number there is a website 440source.com they sell a denso 60 amp one wire alternator. Im so confused as to go with the one wire or three. I read that the one wire does not charge well at idle. I personally would like...

Nobody?

Hello I am thinking about one of my future projects. Rewiring the car I noticed that 440 source sells a Denso 60 amp one wire alternator with the correct mounting hardware. What do you guys think about this? Also will 60 amps be enough if I decide to go to electric fan(s)...

Hello Where can I buy the small braided ground strap that goes from the firewall, to the back of the engine? thank you George

Kocuda what did you do for a speedo cable? thank you George

Looks good what are you doing for a speedo cable? or is it an electric speedo thank you George

Hey guys. Why dont you want to put the battery on the left side? Is it because of the fuel? Also it seems to make sense to put it on the left side as the starter is on the left. If it is on the right how are you running it over to the starter? Many thanks George

moparman where did you put the starter relay and regulator, coil and all the other stuff beautiful!

Any ground wire advise?

Hello and happy new year How many ground wires do you have, and where are they Any pictures? thank you George

I appreciate abodyjoe's comments. I was impressed with my phone conversation with Ron Francis, when I emailed some questions I got answered immediately. I liked their catalog, there is some good information in it. They appear to be a smaller company than Painless, and personally I like to work...

thank you for the heads up on that

Hello and happy holidays Has anyone used Ron Francis wiring harnesses? Were you satisfied? Any comments would be appreciated thank you George

Hello all Has anyone changed over to a alternator with the regulator built in? If yes what did you have to do? Also why would you not want to do this? thank you George

thank cudadon