Search results for query: *

I've heard of people using C-body tie rods but have never tried that myself and try to use moog Idler and pitman arms .

Yeah what flashback said .

I'd say White letter tires and dog dish hub caps only . Looks great on my '64 Dart GT ! A body Joe is that you makin sure that tire is round in that one pic ? Thats great !!

I had better go tell my friend that has been driving his straight axle 440 4 speed 5:11 geared Road runner for allmost 20+ years he did it wrong . There is no proportion to it just a place to run all 5 lines and a sensor to send the signal to the brake light in the case of a leak . The older...

Moparlee , the JR headers are the ones that are wasted and were put on in the early 80's they came with the car when I got it 13yrs ago . LOL . I did have to mae the drivers side and the 100's of chicken hit welds are not pretty . Its raw but quiet when the exhaust is hooked up . I'll post a pic...

I have '74 360 heads with 2.02 intake valves and a holley strip dominator intake on my 340 and run the 110 racing purple gas because of compression ..... piston is at the top of the block ( 0 deck) with a 4 speed and 3:91 sure grip rear the aspalt crayons are getting thin ! DON'T DO THE 273...

Why not the old foot pump manual ?

Great work on the " k" I'd like to do that with mine ...

When did dodge start putting torque boxes in A body 4 speed Chassis ?

Yeah they should've used an import instead or keep a pic of a car out of the advertisement all together .

I'd switch to auto and try to keep the manual with the car if you do decide to dell in the future ... one more original part that could easily be re- installed later . Your choice .

I'm with kitcarlson . It would be a free fix as well as some band adjustments ?

I have up graded my 64 with the 70's style years ago , before the up graded regulator came out and there was some hacking into the harness to use it .... but I have had NO problems .

A car is original only once . You could have what is referred to as a survivor car ,factory paint motor and trans etc,etc,etc find someone that really knows about the survivor cars and go from there . I only have a opinion . I'm really excited about altering the wheel base on mine . Oh and my...

Moparlee that engine pic is sweet .......... I have alot of work to do . I also have a 340 with a 4 speed and thought that solid mounts would be better so I wouldn't have the rubber blow out and cause damage . 6000 rpm + burnouts at 40' long might do that . I had a pile of mounts and thought...

When I do mine over I'm gonna use a 74 dart disc brake master cyllinder and a 74 Dart distribution block ( proportioning valve ) because its a cleaner install and the brake lines wouldn't rub or vibrate . Only a suggestion .

64 Dart GT 340 manual steering and brakes 2800 lbs without fuel .

Please help ... are rear window seals the same between sedan and hard tops for a 64 Dart ?

I used a set truck motor mounts and shims , 5/8 on the passenger side and 1/8 on the driver side .

With the bog part of the eddy carb try different springs in the metering rods A strip kit has 5 different sets of springs and a large assortment of metering rods and jets . Also might think about recurving the distributor .

Input spline on a non-lockup looks like a manual 4 speed input shaft .

I think 63 - 66 are the same . I have a 64 that needs all the window seals replaced . Super soft has a kit for 67& up just seems like they'd have the earlier ones also . I had just checked the super soft website and they only have one for 63 listed . Anyone be able to compare 63 and 64 rear...

I have no complaints on my 2800 lbs springs ! 64 Dart GT 340 4 speed 8 3/4 with 391 gear , oh yeah the car weighed at 2970 no carpet and 1/4 tank of racing fuel LOL.

Nice job 63Morepar!

67 and up a body ? Looks like it fits well , any issues ?

The stock gage is a guesstimate one ... put an aftermarket gage on it and it'll read the exact temp . If you do not have a space for a aftermarket one on the intake I have seen electric ones that screw to the factory sending unit and even comes with one in the package . I bought mine from...

I just used a set of motorhome seats I got from a friend for free and adapted the stock brackets to fit . They look super stockish .

I would look in the parts for sale in this website . There will most possibly be a set for sale or could direct you to a place that sells them for $$$. Expect to pay I would guess between 450 - on up to who knows what price .... good luck

3rd on the bright red but I think I'd back to white with black stripe on mine .

A policeman is a good friend to have ... but cross a policeman and you MAY have crossed alot of them . Tickets anyone ? LOL