Search results for query: *

Hey everyone the gasket on my 71 gas cap is shot, any good recommendations for a replacement? I have seen where some have said the gasket from a early mustang cap will work but havent seen anything specifically about a replacement for the 71 cap

Hey everyone, im looking for a indoor light car cover maybe silk that i can put on my demon just to help with dust and prevent wandering eyes when the garage is open, any suggestions? Id like to stay under the $250-300 mark. I would also prefer a fitted car cover, most places ive looked at...

Hey everyone was just curious on whos running a agm battery on their mopar. I have a mopar group 34 flooded battery now and have had no issues but like the idea of a agm battery where there is no battery acid to spill. Any issues running a agm with the electrical system? I think ive read where...

Hey everyone are we doing secret santa this year? I tried looking but didnt see a thread on it

Hey all long story short i have a cop buddy and this is at their impound lot. One of his cop buddies says its a chrysler 300 but doesnt know the year. He also say its a wedge 440 engine, i dont have any other details, thoughts? From what i can remember i dont recall any chrysler 300s with that...

So upon finding the cracked porcelain on my number 1 plug im going to replace all 8, my question is ive never put anti seize on them before and had no problems removing them, edelbrock says to use anti seize and torque to 10 ft lbs, ngk states that their spark plugs are coated with a special...

Hey everyone ive been having this issue for awhile but today it seems worse, 340 with 4 speed. It will rev up fine sitting still but under load at above around 1500-2000 rpm you can hear popping coming from the exhaust and feel like its surging, swapped the chrome box for a orange box i had same...

Has anyone used the lakewood chromoly u joints? I usually go with spicer but looking at different options. Im needing new 7290 u joints for my demon

I know some have told me i can just heat up the pulley, and use a aresol can to freeze the shaft and the new pulley will go on with ease? Others have recommended to take the alternator apart to press the pulley back on, i have access to a press but is there a write up on alternator disassembly...

I searched and only have seen them mentioned in a few posts but has anyone had any experience with billet specialties products wether it be air cleaners, valve covers or radiator caps? Hows the quality? I have a ball nilled billet breather and pcv ordered, i think they will match my aluminum...

Hey guys ive been off the forum for awhile. I just got on today and am surprised theres no secret santa thread, is fabo doing it this year?

Im about fed up with these over priced radios. Im on my third radio in 6 years and has just recently started acting up again. Anyone else having these issues? Im about ready to do a hidden radio mount

I have a performance plus battery disconnect switch thats been on the car for 7-8 years, i recently noticed that a few times i go to switch it on and the car seems like its getting intermittent power. Turn the switch off then back on and its fine. Well yesterday pulling in the car show it died...

was curious if someone could tell me what it is and where it goes, one of my front buckle covers broke and this piece came out, cant tell where it came from

Just curious if anyone has tried it? I know ceramic coating are all the rave but they arent cheap. Awhile back i saw meguiars hybrid ceramic spray wax at my local zone but sucks that they recommend for the surface to be wet and then spray it on and polish dry. Looked at some videos on youtube...

hey guys, did my 2 year plug change the other day and noticed the plugs are black, definitely running rich. Im running a edelbrock thunder series avs on my 340. I know the idle air mixture hasnt been adjusted in about 6 or so years. Edelbrock says to adjust them one at a time, here is a simple...

He guys i searched and didnt see a thread on the subject, there may have been one started but i couldnt find it. Just curious to see what novelty, vintage or custom plates everyone is running on their mopar. Please do not not include actual plates that are registered to your car, if you do post...

anyone here planning on going? I havent decided yet but its about 45 min away from me

Get it while its gone! Since the trouble they got into with the epa in CA the availability has dwindled down to almost impossible to get. About a month ago I bought two cans from another seller that said he had more than 10 and they are all gone. Theres only 9 cans total left on ebay, these 8...

Just wondering who all has run bfg radial t/a’s on the front of their mopar. How do they ride? I currently have bfg advantage t/a on my demon and they have less of a actual tread block where the radial t/a have more of one, just curious on results that people have had running them on the front...

Hey guys, my demon logo mats were pretty bad, well the drivers side was, 5 years of 4 speed action and i can say they have held up well. Some guys advised me to get floormats from ACC (Auto Custom Carpets) but they were over $40 more than Classic Industries with shipping. I decided to just order...

Has anyone used either? I cant remember where i got my replacement demon ones but the drivers side mat is completely dirty over the demon logo, not horrible but the yellow and even the red has darkened. The ones i have are just straight and then taper towards the front however the ones on...

Anyone heard anything on getting new FABO t shirts? I asked about it back in the spring but wasnt sure if we ever got any or not. Need to get some for spring 2018! Surely the t shirts are cheaper in the winter lol

is this crazy? At that price id expect free shipping NOS 64-73 MOPAR WALNUT HURST 4SP SHIFTER KNOB FACTORY INSTALLED A B BODY 3/8-24 | eBay

hey guys just wanted to post this up as it may be a perfect fix all to these junky aftermarket plastic shrouds. I stumbled upon wizardcooling radiators thanks to another member on here, @moparspares. They offer a rad setup for mopar with 22” rad and comes with a aluminum shroud. I contacted...

so i cant be the only one whos spent the money on repro shroud for it only to distort after a couple years can i? After about 2-3 years one day the fan started eating up the shroud, noticed the bottom had sort of curled up and was making contact with the fan, also it is wayyy off center, since...

Anyone else hear about the issues liquid glass auto polish has gotten into with CA? Not available anywhere after they got fined for not being voc compliant. That was the best wax i have ever used. Guess ill have to resort to meguiars

Just trying to get a feel for how much an improvement a clutch fan is over a fixed fan. Anybody notice a difference good or bad making the switch? Just curious if i put one on if it will run warmer than the fixed fan setup. Anyone notice any temp differences between the two?

just happened to be flipping through the roadkill extra episodes and came upon this so you know i had to watch it, looks like they will sell the car for the right price, god only knows how much that is lol. watch the video for details

Just curious to how many people have installed lojack or a tracking device in their mopar, any benefits over the cost? Any experiences?