Search results for query: *

Got a email from local mopar club last night that someone had some parts for sale...looking at the list of stuff...Saw some Hooker Fender Well headers for sale...Contacted the seller...and they are what I thought they were...Hooker Fender Well headers for an early A body.... 100...

Well..the Duster sat for over a year in the garage....started it up about a month ago...notice smoke out of the passenger side exhaust...intake bolts were all loose...tighten up smoke gone...and checked valve cover bolts too...loose..tighten up... Replaced thermostat with 180 from 160.....put...

Bought this magnum engines years ago...it is a 300 hp factory crate motor that was disassembled. The guy had swapped out some parts, Replaced stock pistons with KB 362 pistons standard bore. Eagle SIR rods, stock crank plus the magnum heads with rockers ...roller lifters...oem roller...

Have had these parts for years now. The MP (Scat) cast crank 15 yrs...pistons for 5 years...block for 5 years that I bought from someone else. Couple of years ago I finally bought the rings I needed. The block has cam bearing....and brass freeze plugs in it. I have KB 847 .030 which are the...

215cc CNC Ported MOPAR 273-360 LA Set Up For HYD Roller 2.08 Int 1.60 Exh Valves | eBay Return of the Air Woofers....??? lol

Last summer bought a complete 97 5.9 Magnum for 150. Came out of a Durango with 140K miles. Had a problem with intake plenum leaking oil. Torn it down, and the cylinders looked great. Used a flex hone and honed the cylinders. Clean pistons...rods and block with oven cleaner....crank look...

Putting rings and bearing in a 1999 5.9 Magnum for use in a 88 D250. I am reusing the stock camshaft with newer set of roller lifters. I put the camshaft in and started to degree it, got a Center Line of 117 degrees...Did not think that was correct, advanced the cam and it is now sitting at...

Ok...doing my 1st 360 magnum engine. I have a 380 HP hydraulic roller cam. Trying to degree this cam in, only thing I know about it is duration at .050 is 230/234 with a 108 LSA..... I tried to degree the cam in using the MP method of .050 before and after max lift, add the two degrees and...

Just picked up Internally Balance 360 Cast Crank today. The crank was balanced with SRP 360 .040 pistons. Scat I beams rods. Weights are shown on the worksheet. The crank still took one slug of Mallory in the front and rear counterweights. Attached is the worksheet I think, scanner at work...

Look like another aluminium head is coming for the small block mopar... http://board.moparts.org/ubbthreads/showflat.php?Cat=0&Number=8268641&an=0&page=0#Post8268641 look about half way down the page...Crabman173 says they will have the 1st of the new heads in about a week... Stay Tune...

Wow...these started out around 300 bucks...now at 668 dollars each bare.... What a deal...LOL Mopar Chrysler SB 318 340 360 190cc 68cc Full CNC Bare Alum Cylinder Head | eBay

http://board.moparts.org/ubbthreads/showflat.php?Cat=0&Number=7555161&an=0&page=0#Post7555161 they ran the airwolf 220 heads on a stock bore and stroke 360..

bare... http://www.ebay.com/itm/SMALL-BLOCK-CHRYSLER-STREET-HIGH-PERFORMANCE-COMPETITION-ALUMINUM-CYLINDER-HEADS-/290684043733?pt=Motors_Car_Truck_Parts_Accessories&hash=item43ae1e81d5 cnc combo...heads..intake ..rockers..valve covers..etc...

http://www.ebay.com/itm/chrysler-mopar-aluminum-heads-318-340-360-67-91-quality-parts-assembly-NEW-/150796272009?hash=item231c288189&item=150796272009&pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr

Not the stud thread size... but the nuts that go on the exhaust studs... I know they are 5/16 thread but what coarse?

Someone a while back was looking for these... allows the 318/340 oil pans to used on 360s... http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=310250191877&viewitem=&sspagename=STRK%3AMEWAX%3AIT

My 73 340 Duster with 360 eddy heads, 10.6 to compression with Hughes 230/237 .515/.535 wont pass smog. Used to have friend of friend who would pass it. Anyway that guy is no longer available...LOL Nevada has a classic car plate, over 30 yrs old, car must pass smog for registration and...

Building a 408 for 71 dart bracket racer. Looking for a solid flat tappet camshaft. Using a scat 4 in crank with their I beam rods and KB744 flat top pistons, heads will be Eddy cnc close chamber heads with 1.6 rockers. intake eddy victor or super victor headers hooker 1 3/4 super...

found this Mopar Peformance short block about 1/2 mile from me. P4876907 came with engine stand and holley 750 dp list-8156. short block has never been run...has mopar 509 cam...block is a 89 roller 360 with seal power h116cp .020 pistons...they added an oild pan and pump to it... I...