Search results for query: *

Who has the highest quality, stock replacement parts available now ? Im tempted to order it all from Rock Auto but some times the cheap prices scare me.

I have a pair of leaf springs. Part number 2835064/2835065 Ive tried google with no luck.

My idler arm has a bunch od play (up and down in the pocket) Are there shims that go in the Kframe ? All I have is the foam gasket.

Is there really any need to reinforce the lower control arms ? Ive seen these plates for sale and all ways wondered if it was really worth doing ? I can make my own out of scrap lying on the shop floor if its worth my time doing.

Oops, I seemed to have collapsed the steering shaft in my column. Is it safe to full the shaft back apart ? Whats the correct length for an A body power steering shaft ?

I was looking at my K frame and thinking that the slant 6 ones I have seen before looked different mainly the passenger side mount. Im wondering if someone may have swapped a V8 frame in it already. (I doubt my luck is that good )

Is anyone running a B body rear (un cut) in there car ? Seeing they are easier to find I may try one. Hoping it will fit fine with a 5.5" backspcing rim.

Does anyone have a roll bar in a fastback Barracuda ? Im looking at all the kits available and wonder if the rear bars are going to be long enough to make it in to the trunk. Most of the kits available are made to cover all A bodies. Fastback Barracudas dont have the trunk right after the rear...

These are Moparts member 572's tips for SuperStock Springs. Pretty helpfull. FRONT SHOCKS I have used adjustable shocks, but the stock ones seem to work the best. TORSION BARS I have used different sizes. Have used MP Drag bars an even tried turning a set down on the lathe. Stock slant...

I finally made myself work on the front end today. changed out the LCAs and old bent strut rods with new adjustable ones. I have 2 questions 1. Do you set ride height then tighten the suspension parts or tighten then set ride height ? 2. strut rod bushings, Do the curved ends face in to...

Does anyone have any tips for installing rim screws ? Tire mounted, un mounted ?

Anyone know the knurl diameter ?

Anyone ever rebuild one them selves. easier or leave it to someone else ? what parts go bad in them and are they still available ? This is a fast ratio box by the way.

Check these out ! http://www.garysautomotive.net/specialtyprods.html Anyone got an extra grand burning a hole in there pocket ? :D

Heres a recap on yesterday. I started by jacking the car up nice and high. I unbolted the shocks and drive shaft. Next came the E-brake cables. I had to undo all the rear brakes to get them out. Not thinking that I had my camera with me I didnt think to take a picture so I could...

What did you do about the e-brake cable? It goes right were the frame connector needs to be.

Running a stock width rear what backspacing is best for a 10" rim? I wanted to run Pro-stars wich come in 6.5" Drag-lites come in 7.5" Or I can just get a set of AutoDrags like I have now with 7.25" I really want a set of Aluma-stars but they more money then I want to spend on rims.

ART torque boxes http://www.autorust.com/safetcap/index.htm They also sell frame connectors but I dont see them on the site.

What kind are you using ? Did you make them yourself or buy a set ? Im looking for a set of weld in connectors that go threw the floor pans.

Who sells the best kits ? Im going to put one in my car but I dont know of anyshops around that can bend one up. Should I just go with the 8 point or do a full cage and get it over with. My cars slowly being built as a SS/AA clone.