Search results for query: *

Hello I have a 73 Dart Swinger is the wheel base 108 or 111 inches? thank you George

Has anyone had any experience with this companies product? http://cgi.ebay.com/ebaymotors/XV-Mopar-Tilt-Steering-Column-A-Body-w-o-Key-_W0QQcmdZViewItemQQhashZitem4cebf71880QQitemZ330376353920QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories#ht_1389wt_941

Good Morning Someone is trying to sell me a brand new flaming river column. He says its for a Mopar and its 41 inches long. Could someone tell me the correct length of the steering column for a 73 Dart Many thanks George

Hello All I replaced my strut rod bushings, but did not tighten them. I was going to work on the car this weekend, and lost the instruction paper that came with the bushings. My question is how tight do I make them, and do I tighten them while the car is still ob jack stands, or when the car...

Hello all when I removed the control arms, this is how the cam bolts were installed, I am curious if they are in correct, or does the adjustment end go on the outside, and is the lobe supposed to face up or down thank you George Gerhard

Hello my 73 Dart has a 400 with automatic trans. I am in the process of rebuilding the front end. Before I took everything apart I noticed that if I pushed down on the fender, the suspension did not lift the fender back up, I had to lift it up. The torsion bars measure .890" What diameter...

Hello currently the front end of my 440 Dart is all apart, I am replacing all the bushings, upper all lower ball joints, I had the steering box rebuilt by firm feel. I noticed before I started this job that the front end was very stiff. If I pushed down on the fender, there was no spring, I...

Hello All on the lower balljoint it slips through the control arm there is a nut and cotter pin, no washer Is there supposed to be a washer between the spindle and the upper balljoint nut? Before I took the front end apart there were washers under the nuts of the upper balljoints thank you...

Hello all I have enclosed some pics. In order to remove the steering column do I remove the 2 bolts on the smaller flange, or the three on the larger flange? Also this car was automatic on the column at one time in its life. Now I will have a real problem removing the steering column as the...

I took apart my front end today to replace the upper and lower control arm bushings. I purchased from Summit the energy suspension bushings. The uppers came with shells, but the lowers are just the bushing. They provided a lube to be used. I have read on this forum people complaining of...

Good Day all On my 73 Dart, I noticed that the idler arm fits loose into the k member. Are there shim or spacers that perhaps someone forgot to install? Should this be a snug fit as you put the idler arm into the k member? Many thanks George [email protected]

Hello My manual steering box in my 73 Dart has a lot of play today I dropped the center link and when I grab the pitman arm I can feel a got amount of left/right play. I tried to adjust the box, but no matter how much I turn the adjusting screw I cannot detect an improvement. If I want to...