Search results for query: *

so now a new issue I currently have a pair of rims for the back of my stock tire wells on my 65 dodge dart the are 15 x7 and the tires are 235/75/15 I'm stay with that tire size but I know I need to swap rims to the correct ones . these 2 rim I measured from where the drum presses up against...

Ok so as you already know I have The correct Mopar A-body shackles , front and rear mounting brackets and Super Stock leaf springs 20" up front and 35 " on back measuring from eye hole to center leaf spring stud. the bottom of the shackles is facing up towards the trunk floor . I know they are...

I have a 1965 dodge dart 2 door post car . I will be running a built 360, racing 904 automatic tranny, 8-3/4 abody rear with a 498 case 3:55 gears and hopefully a sure grip unit . my question is I heard that you can run a v8 drive shaft from out of a dodge short bed truck because it's stronger...

I know this is for Abody cars but i have a 1982 dodge d150 that recently starting over charging . i have an after market battery volt guage with needle . before the truck started over charging it stayed at 14 volts . when it over charged it pegged out all the way over to 16. When i bought the...

So is there a difference between the J heads and the X heads for a low buget performance build ??? I have a pair of J heads with 2.02 valves .

First of all im on a tight buget but i know ill have to cough up a few bucks for this project. I want to use mostly stock parts and some after market parts. Here's what i have in my inventory for the 360 build : 1978 360 LA block , dont know the bore size yet? Still have the crank and piston...

I have a 1965 dodge dart with a slant 225 slant 6 with a Carter 1barrel carb and points distributor . The during warming up and after fully warmed up has a good even idle with no miss. When i go to give it gas it stumbles/hesitates then picks up? I've checked the timing,points and points gap...

I recently had an 1985 318 short block rebuilt/modified at a really good machine shop. Bored 30 over, performance flat top pistons 9.5:1 compression. Erison cam: E 420121 Grind TQ20H 112+4 Love separation Over lap 68 valve lift int/exh 0.449 Duration 292 rocker arm 1.50 and lunati...