Search results for query: *

Howdy people, I’m working on a members car, and there are a few parts missing from the car. Namely in this thread, the hood latch bale loop that mounts to the hood and engages the latch mechanism when closed. I believe it is also missing the secondary safety latch as well, so I am looking for...

howdy people, cosgig here. I’m working on changing the drivers side floorpan in a 70 Roadrunner, and the crossmember is a little weak where it meets the rocker. I’m looking for about a foot of the crossmember end to weld into place, maybe up to the torsion bar socket. If anybody is parting out a...

Ok gang, before I lose my hair and my patience looking for where I put this damn thing, I’m looking to buy a lower shifter pivot bracket for a console shifted 66 Cuda with 904 and an auto trans. This is the bracket that mounts to the tailshaft of the trans and holds the shifter pivot rod in...

Howdy people, cosgig here. I’m on the hunt for just one Plymouth Division Dogdish hubcap. I have 3 in decent condition, but the 4th one I have is pretty dented up. I’m looking for a stainless steel one, undented, but it doesn’t have to be NOS or super nice. As a matter of fact, I’d like one to...

Howdy folks, like the sign says, I need a couple of parts for an early A body! First thing I need is the small clip that holds the hood torsion springs together in the middle! I don't think the torsion action will hold up the good without this center clip, and I can't find one around here! I...

Howdy all, cosgig here! I'm looking for a pair of hood pin bezels that mount to the top of the hood! They would be going on the hood of this 74 Roadrunner I picked up! I have the pins, cables and wires, just need a couple bezels! New or used is fine, I'd buy either, and they don't have to be...

Howdy gang, cosgig here! With Dels help, I am amending this thread to correct the item I really need!! The part I need is the reverse light trigger switch that mounts to the shifter mounting bracket and turns on the revers light when the shifter is in the reverse position!!! I assume they are...

Howdy gang, cosgig here! I am looking for a pair of red defroster vents for an early A body! Seems that red takes the sun a little harder than other colors, and my pair are no exception!! Anybody have a decent pair to sell just message, and thanks for any input received!! Geof

Howdy all, cosgig here! I'm in need of a pair of rear leaf spring shackles for an A body, I think they're all the same! Yea, I know I can just buy them from Mancini for $44, but I just need a set for a roller car and don't want to spend $44 and drive all the way to Roseville to get em! Anybody...

Howdy all, cosgig here! I'm looking for some U-Bolts for an 8 3/4" rear! I'd prefer the OE kind with the flatted top, used is fine but if anybody knows if they're available new, I would go that route as well! Must be the flatted kind if I'm ordering new though, I can get the round topped ones...

Howdy all, cosgig here! I'm in need of some help here from the family, I'm in need of a 67-69 Cuda temperature guage for Nellas cluster! Got the entire cluster all bench tested, and everything's working but the temp guage! It's been tested and it's junk! So, does anyone have a temp guage to sell...

Howdy all, cosgig here! I am in need of a 22" radiator correct for early A body 1965-66 cars! I'd like a plug and play, or one that needs minor repair, don't really want to re-core one if I don't have to! I'm trying to keep this car on a budget! Any radiator will be considered though! PM me if...

Howdy all, cosgig here! I am in need of an early A body slant 6 center link on the cheep cheep!! I just need something to put in place of the V8 unit sold to a member here to get my parts car rolling...straight anyway! Anybody have one from a swap out or something, that they would let go cheap...

Howdy all, cosgig here! I am in need of a right hand lower taillight lense that is correct for 1966 Barracuda only. It is the small square red lense that goes on the bottom of the passenger side taillight, and has a large "R" on it. Any help is much appreciated, thanks y'all!! Geof

Howdy all, cosgig here. As the title says, I'm in need of just one SBP Rallye cone style center cap to complete a set of rims I have. I'd prefer it to be the 70 light argent, but not an issue if it isn't. Would also like it to be nice, not show worthy but nice!! PM with any availability...

Howdy all, I am starting a new project trying to fill a longstanding need for us early A body guys...where to find those non-existent extra long lugnuts for the Formula "S" hubcaps. Heres the scoop... A few years ago a friend of mine set about making sets of stainless steel lugnuts in exact...

Howdy all, cosgig here. I am in need of a part to settle a deal I made with a buddy. In the deal I made for the 66 Valiant vert I gave my buddy a set of LBP disc brakes as part of the payment. Well, long story short, the drivers side upper control arm was too rusty and thin to use. I don't like...

Howdy all, I am in need of a headlight retaining ring for my 74 Duster project. I have 2 extra but they all have the mounting tabs broken off. Anybody got a good one they could part with? P.M me with any details and I'll shoot out the $$$ Thanks, and Happy Thankgiving all, Geof

I have a friend here in Michigan who is in need of a rear window for his 66 Plymouth Valiant 2 door post car. Does anyone out there in FABO land have an extra that they would like to sell? The nearer to Michigan the better. P.M. me with any window available and I will pass the details on to him...

Well, I took the 66 out for one last ride before winter today. 50 MPH winds, driving rains and blustery conditions. Not because I wanted to have one last ride before it snows, but because I was attending a memorial service for a good friend who passed away this week. Joe Hall was his name...

Any early A-body guys out there??? I am looking for the can shaped housing that holds the electronics for the tach for a 66 Cuda. It mounts under the kick panel on the driver side. Does anybody have one of these they would like to sell? Please P.M. me if you have one and are interested in...