1966 Valiant Sedan V8 Swap (Victoria)

-
JDMopar said:
Mike, put a big copper washer between the head of the bolt and where it goes thru the 90 degree adapter. Then the thick cork washer between the adapter and block, the little one that goes over the bolt. Then dob both sides of the big round ring gasket with Ultra Black RTV. Throw that fiber gasket away that you use the big copper washer to replace. Them things crack after some heat cycles and there comes your oil leak. The washers below are the ones you want. I got a pack from McMaster-Carr. You will have to hone the ID out just a touch so they slide up the big bolt.View attachment 1716261050
Click to expand...
Thank you JD, I screen shot your instructions and the washer pac.
I do appreciate your knowledge.
 
Should be done and ready for a road trip soon, this week or next.
It takes a lot of time , care and love to get one this far, but my friends here and my family has not gave up on me.
Click to expand...

Screenshot_20240922-213559_Messenger.jpg


Screenshot_20240922-213605_Messenger.jpg


Screenshot_20240922-213608_Messenger.jpg


FB_IMG_1726889288342.jpg
 
Jeff Seighman said:
OH YEAH, waiting for that first big BURNOUT.
Click to expand...
Jeff Long drove her on a 40 mile trip and said she is ready, drives great and my gear selection in my sure grip 8 1/4 is perfect for this lite weight 66, moves very good. Yes there will be a video of that soon enough
 
Drove like a dream, no hands needed till a stiff hard wind out of the east hit me, 60 mph and rpms was steady at 18, 19 hundred. Just me and Victoria cruising at 65 on the road home.

Resized_20240928_131159.jpeg
 
Aluminum stock looking radiator, Holley 750 all tuned up. This family mopar racing team fell in love with Victoria, said the gears I put in with a sure grip is perfect for driving, lite car tall gears are fun. Thanks go out to my 30 year friend Jeff Long and his son Jaron for there time and care they put in to my gall Victoria

20240928_122132.jpg


20240928_120403.jpg


20240928_113456.jpg
 
Took her out for a drive and found my old spot to give her a hit, sure grip pulls hard out of the hole, pair of two black patches on the fairly new asfault.. I know, get a video :lol: pictures for now on my 7 years of updating

20240930_131437.jpg


20240930_131155.jpg


20240930_131349.jpg


20240930_131251.jpg


20240930_131326.jpg


20240930_131105.jpg


20240930_131235.jpg
 
Tony Fields would be so proud of and all the work you have done to make it a great beautiful ride, Joe
 
Right. Get a video. lol Also, just friendly advice. Separate those plug wires. They've been known to arc between each other tied together like that. Speakin from experience. lol
 
You need to bring it to Cruizin the Coast in Biloxi next week. You would have a ball riding around with over 10,000 others
 
You must log in or register to reply here.
-

Back
Top