1968 Dodge Dart GT Sleeping Beauty?

-
The front Amber marker light lens are faded. No one sells the lense only. I found Amber LED’s so they will shine just fine.
IMG_5111.jpeg


IMG_5112.jpeg


IMG_5113.jpeg


IMG_5114.jpeg

I have red LED’s for the rear.
 
Last edited:
Funds are running low!!! $160 remote mirror and $300 carpet are slowing me down. I wanted to button up the interior. I am doing all I can with what I have. I sold a couple of things on Facebook so I have money for bumpers. Maybe I should use that money! LOL
 
Took me 8 years to build my Hardtop. Never took money from my paycheck. Did side jobs. Fixed and sold lawn mowers and snow Blowers, Small collision work, Struts and brake jobs. Sold my Dakota and drove a shitbox and whatever else I could wheel and deal.
 
I like many have been blessed beyond my wildest expectations. Way too many material things. Cars and projects are my passion. I do live for my family which keeps me focused. I plan on working as long as I can. Retirement and extra cash don’t seem to go together. I enjoy my job so that makes it easier. At 65 my company has usually cut you loose. I guess now that no one wants to work. It makes my job more secure.
 
Front door plastic vapor barriers were good. Rear vapor barriers the plastic shredded. I am using a paper based vapor barrier for flooring. Should work fine. I am attaching it to the back of the panels.
IMG_5118.jpeg


IMG_5119.jpeg


IMG_5120.jpeg
 
hcallaway said:
Front door plastic vapor barriers were good. Rear vapor barriers the plastic shredded. I am using a paper based vapor barrier for flooring. Should work fine. I am attaching it to the back of the panels
Click to expand...
Btw the "vapor" barrier is also a water deflector. It tucks into slots at the bottom to return any water back into the quarter cavity to drain out the drain holes.


Behind the blue tape is the slot and the plastic going into it.

This is new plastic copied from the OEM piece and roll calking adhesive applied in the same OEM location.
IMG_20200308_154146.jpg



This is a front door but it has the same type of slot as the rear
IMG_20200328_170501.jpg
 
Last edited:
My fronts are OEM. On the rears I was only worried about moisture on the hardboard. I have new window seals and when ever they come off back order the roof to window seals will be in place. Car will sit in my garage.
 
Dana67Dart said:
Btw the "vapor" barrier is also a water deflector. It tucks into slots at the bottom to return any water back into the quarter cavity to drain out the drain holes.


Behind the blue tape is the slot and the plastic going into it.

This is new plastic copied from the OEM piece and roll calking adhesive applied in the same OEM location.
View attachment 1716330145


This is a front door but it has the same type of slot as the rearView attachment 1716330146
Click to expand...
I did the same with 6 mil plastic. Then used black gaffers tape.
https://www.amazon.com/Professional...ive-Multipurpose/dp/B00GZE3UJ8/?tag=fabo03-20
 
I am getting close to having all the interior wrapped up. Remote side mirror is due next week. Other than carpet being a major item, I am in the home stretch.
Wiring harness is 90% complete. So I am making a mental list before the engine transmission drop. I need brake lines and a gas line.
I have tried to blow out the original line. It looks great and I wanted to reuse it
I have tried multiple times to clear it with my air compressor.

It finally broke open. 10-15’ across my floor and up to 10’ on the garage door. Foul sticky smelly old gas. The Dart was up in the air!

IMG_5150.jpeg


IMG_5148.jpeg
 
Nice to be able to save many original items as it goes back together. Most things were bagged and tagged with screws included.

Vent window rubbers were in great shape. Cleaned side glasses and windshield.

IMG_5146.jpeg


IMG_5144.jpeg
 
Some badging. Old emblems are not perfect but they will be just fine. Youngest son and wife dropped by and are ready to drive it! They made some nice comments. Those keep making it worth the efforts.

IMG_5152.jpeg


IMG_5153.jpeg
 
You must log in or register to reply here.
-

Back
Top