63 Dodge Dart, now let me see;)

-
i'd fit and use them as is, swapping left to right. then you have time to source a replacement for the worn one but still drive in comfort while you look. the drivers are usually the most worn but a pair of pass' seats isn't an issue if it gives you a good pair.
neil.
 
spent a little time on the valve cover, I'll be working on the PCV soon. Not finished, but's a good start;)
argh, have to make dinner!

slant 6 valve covera.jpg


valve coverb.jpg


valve covera.jpg
 
Hi guys, I got my Distributor setup from Ray :thumbsup:, it's the bye bye to the stock ecm and hello HEI~ Ray made it easy to install, just a few wires and POOF :thankyou: :thankyou: ! Done! Now if I could just get the one more thing to re-install my int/exh manifold~
Merry Christmas;)
dne'

S6 HEId.jpg


S6 HEIc.jpg


S6 HEIb.jpg


S6 HEI.jpg


S6 HEIa.jpg
 
Here's the "one more thing" :lol: , I had ordered some Permatex thread sealer from Amazon and it got here lickity split~ however, on the back of the package says works best with the permatex activator, so, no biggy, almost two weeks till it gets here, no one has it. I'd rather wait and do the stud installation the best I can as I DO NOT WANT LEAKS! This time I will install the studs, give a day or less, fill with coolant, pressure test before installing the intake/exh to make darned sure there are no leaks.

And a Merry Christmas to you and all my routy friends;)
JDMopar said:
Merry Christmas hard working lady! If the 'one more thing' is the triangle washers, there's a set for sale in the parts dept. right now! :)
Click to expand...
 
Ho Ho Ho Merry Christmas to all …
Don’t forget to put out the cookies and milk for Santa tonight …
And to all a good night
 
You must log in or register to reply here.
-

Back
Top