DRENO
Well-Known Member
These are the only pics I have for now.
67 68 69 Barracuda/Cuda
- Thread starter 69wacuda
- Start date
-
Topless Shark
Active Member
Bought mine drivable, just starting to restore it, but not willing to put it out of service yet
Last winter restored and rewired the dash to avoid fires. This winter I will rebuild the front end to avoid accidents!
After
Before
Last winter restored and rewired the dash to avoid fires. This winter I will rebuild the front end to avoid accidents!
After
Before
whitedawg
Well-Known Member
Been looking for a Barracuda for awhile..just picked up a 67 Notch 273 4 bbl auto. Will probaly keep the 273 but will keep an open mind about 360 and match to Tremec manual
sumbitmopar
Well-Known Member
Here's my '67 I bought a couple months ago. So just recovered buckets and new fuel tank. She runs real fine. Hope to have body/paint done by spring.
f8 duster
Active Member
Heres mine ,Won it a mouth ago
mullinax95
Well-Known Member
68340fish
Well-Known Member
Our project, '68 340-S 4-speed. We bought this exactly 3 years ago hoping it would be done for his 16th B-day.... he turns 16 next month so we may be shooting for 18. Its been alot of fun so far, have spent ALOT of money, now need to save for the bodywork & paint.
f8 duster
Active Member
Barracuda67
Well-Known Member
My 1967 Barracuda Fastback. I have had this car for approx 15yrs. Original paint on it when I bought it. (Red, I dont car much for red.) So its now Dark Iris Met. Pearl Coat. Original Factory 273, 904, 71/4 suregrip rear with 276 gears still equiped. With some small modifications. 8)
carguy46
Senior Member
Here's mine! 69' 383-S Fastback, 4 Speed, 58,000 original miles. Pretty much all original inside and out. Just got this a couple of months ago! Just doing a little clean-up on it. Car was in storage for 10 years.
carguy46
Senior Member
Having a little trouble uploading images!
Oklacarcollecto
Life is an experiment
OK, guys now I have to dig out that convertible that is buried in the shop and get some pictures.
And this would be mine ... LimeLight rather than Sublime, with some extra fine gold metal flake added in. :-D
Bought it April 9, 1991 as a total POS basketcase for $250 ... complete with the infamous "box of spare parts in the trunk." It's come a long way since then. I'm almost out of picture room on here so click on the link if you want to see more of the resto; all the mods / specifications are listed there too. I've had it so long the earliest pics are on real film LOL.
http://www.motortopia.com/album/5899
Bought it April 9, 1991 as a total POS basketcase for $250 ... complete with the infamous "box of spare parts in the trunk." It's come a long way since then. I'm almost out of picture room on here so click on the link if you want to see more of the resto; all the mods / specifications are listed there too. I've had it so long the earliest pics are on real film LOL.
http://www.motortopia.com/album/5899
Walt_Felix
Well-Known Member
What I noticed lately is back when I first got my car, you never saw the Notchbacks at the events, only fastbacks. I remember in Englishtown in 1992 having people asking what the car was and being surprised when I said it was a 1967 Barracuda. Knowledgeable Mopar guys knew it but it seemed many spectators didn't know the Barracuda was available in something other than a fastback. It was what first attracted me to the car (being something different). Now it seems I see more notchbacks than fastbacks, this thread included.
Here's mine:
1970 340 block, bored .030", eagle 4" forged crank, KB 10:1 pistons, eagle H-beam rods, J-Heads, MP intake, Holley 750, Hooker Comp headers, 3" Pypes Stainless X-Treme w/violator mufflers and QTP electric cutouts. 4-speed w/ Ram Clutches Street Dual Clutch & Aluminum flywheel, 8 3/4 rear w/489 case, 4.30:1 gears, Limited Slip & Moser Alloys.
Still a work in progress, planned winter project is new heads and intake and to shed some weight off the car.
Here's mine:
1970 340 block, bored .030", eagle 4" forged crank, KB 10:1 pistons, eagle H-beam rods, J-Heads, MP intake, Holley 750, Hooker Comp headers, 3" Pypes Stainless X-Treme w/violator mufflers and QTP electric cutouts. 4-speed w/ Ram Clutches Street Dual Clutch & Aluminum flywheel, 8 3/4 rear w/489 case, 4.30:1 gears, Limited Slip & Moser Alloys.
Still a work in progress, planned winter project is new heads and intake and to shed some weight off the car.
cudaspaz
Well-Known Member
What I noticed lately is back when I first got my car, you never saw the Notchbacks at the events, only fastbacks. I remember in Englishtown in 1992 having people asking what the car was and being surprised when I said it was a 1967 Barracuda. Knowledgeable Mopar guys knew it but it seemed many spectators didn't know the Barracuda was available in something other than a fastback. It was what first attracted me to the car (being something different). Now it seems I see more notchbacks than fastbacks, this thread included.
Here's mine:
1970 340 block, bored .030", eagle 4" forged crank, KB 10:1 pistons, eagle H-beam rods, J-Heads, MP intake, Holley 750, Hooker Comp headers, 3" Pypes Stainless X-Treme w/violator mufflers and QTP electric cutouts. 4-speed w/ Ram Clutches Street Dual Clutch & Aluminum flywheel, 8 3/4 rear w/489 case, 4.30:1 gears, Limited Slip & Moser Alloys.
Still a work in progress, planned winter project is new heads and intake and to shed some weight off the car.
I like this car!!!
I have noticed alot more notchback's myself lately.
I like the purple racing harnesses you found as well, nice touch.
I have a question for you, check your P/M's.
momoparman
MOISMYHOME
You have seen it before and here it is again.....yes I love the older barracudas.
Mop
Mop
Walt_Felix
Well-Known Member
I've never been a big fan of the lowered with big rims look, but that's NICE!
DRENO
Well-Known Member
Just a simple question and you've probably been asked this before,BTW,that car is awsome.Wondering why you didn't shave the door handles,with the rest of the car being so clean with a small amount of brightwork I thought it would be a natural.8)
momoparman
MOISMYHOME
I tried to keep as much of the original chrome on the car and still have it look clean and fresh....i.e. modern...that's why the side emblems are gone and the p l y m o u t h on the front are gone. If you see the car up close there is still A LOT of bright work on it. Notice the drip rails and trim around all of the windows are still intact I also did the 68-69 conversion on the front and rear windows.
Personally I hate shaved door handles....always looks like something is missing.
The hood and trunk still sport the barracuda in the winner circle emblems as well.
Thanks for you comments.
Personally I hate shaved door handles....always looks like something is missing.
The hood and trunk still sport the barracuda in the winner circle emblems as well.
Thanks for you comments.
dudeman
Well-Known Member
What do you mean about the conversion on the windows? I'm doing a 67, I'm a long way from worrying about windows, but thought I'd ask and keep the info in the back of my mind?
-
