AlV 69 Dodge GTS project

-
Halfway victory!!!
15965952_1201053623310343_9098432776800833281_n.jpg


16142618_1201244363291269_2006002146346517666_n.jpg


16105609_1201244369957935_8824400540664889242_n.jpg


uh oh....I'm thinking now is the time to get a firm feel power steering gear.
 
They look finished with a stripe. My car is a factory stripe delete, but I'm putting a white one on anyway.
 
dano said:
They look finished with a stripe. My car is a factory stripe delete, but I'm putting a white one on anyway.
Click to expand...
I feel the same way. It's a nice accent... I need to post a picture from above so you can see how the hood stripe Black vinyl top and Bee strip play against each other
 
dano said:
They look finished with a stripe. My car is a factory stripe delete, but I'm putting a white one on anyway.
Click to expand...

This is the reason I put a stripe on my Dart despite the fact it didn't originally have one. Provides a nice contrast to bright paint too if you don't have a vinyl top to break up all the color.
 
I'm just realizing I didn't post the rest of the trans swap! And Firm feel install.

IMG_2122.PNG


IMG_2123.PNG


IMG_2125.PNG
 
Out with the 391 in with the 323.
I bought a 355 ring and pinion along with master rebuild kit to swap out the 391s.

Both 741 cases the only difference is mine with the 391 had the big 7290 yoke but the 323 center came with the small 7260 yoke. Is that a thing? It must be because I updated my order to include a 7290-7260 u joint.

IMG_2252.JPG
 
Put in a Grant Classic wheel.
Seems cool and a lot cheaper than the Mopar repop.
Anyone have or make a fratzog center cap?

20431609_10209841580014862_7732045843683251281_n.jpg


20228815_10209841608255568_6378189776021618464_n.jpg
 
Since Grant doesn't make a Fratzog horn button I Had to take matters into my own hands. This is what I came up with using an old sail panel emblem.

I bowled down a stock plain Grant button, painted it black and drilled it for the emblem.
20431342_1388490511233319_8802438136893845463_n.jpg
 
Hey Rob
Measuring 1.5 inches up from the lip on each end of the hood set a tape measure up and follow my images.

IMG_2536.JPG


IMG_2537.JPG


IMG_2538.JPG


IMG_2539.JPG


IMG_2540.JPG


IMG_2541.JPG


IMG_2542.JPG


IMG_2545.JPG
 
Really like the lift. Thinking about doing something similar in my garage. How much floor to ceiling clearance do you have to accommodate the lift? And did you install it yourself or have it professionally installed?
 
You must log in or register to reply here.
-

Back
Top