AlV 69 Dodge GTS project

-
Had to send the Radiator out to get recored because it started to weep at the to tank. 3 rows with increased fin count.

Can't wait to see it. I'll take this time to correct the heater lines and swap the 160 stat with a 180.

rad.jpg
 
mopowers said:
Just curious- How much are they charging you for the re-core? If you don't mind of course.
Click to expand...

Well it's going to be 400 out the door. Ouch!

That includes the new 3 row copper core with increased fin count. Clean and repair brass tanks, oil cooler w/ new firings and frame.

It'll look original but have greater heat transfer, have the original tanks with numbers and fit perfectly back in the car.
 
DusterDaddy said:
Man you're always thinkin' Great plan to make it cool better but look right!
Click to expand...
Thanks man. It was the only way to go for me. A reproduction piece is almost the same price.
If I had taken another route with the car I might have picked up an aluminum rad with electric fans.
 
My factory 2949 068 22" radiator is back from the shop with the New high efficiency core installed. I've kept the original frame and tanks so the numbers are correct.

I couldn't increase to 4 rows because there was no room left in the tank.
So we increased the tube count by decreasing the spacing from 9/16 to 3/8 and increasing the fin count from 8 per inch to 12 per inch.

These changes effectively increase surface area for cooking by roughly 25% so it's like having a 4th row :)

Here is a great primer on High Effeiciency radiator cores
http://www.customlineclub.org.au/Reg_Core_Vs_Hi_Efic_Core_Radiator.pdf



13516721_1026811984067842_8237539505606578198_n.jpg


13516488_1026812047401169_2031225566457900555_n.jpg


13510960_1026812017401172_8861794019798402786_n.jpg


13533297_1026815357400838_738093861679870200_n.jpg


13502068_1026812024067838_1935409879167013010_n.jpg
 

Attachments

  • Reg_Core_Vs_Hi_Efic_Core_Radiator.pdf
    297.7 KB · Views: 496
Got the rad installed and it works great.
85 degrees outside 18o stat installed and I she keeps a steady 185-190.

Even when standing still. Here we are running errands.

image.jpeg
 
Great Job Al. Your patients and attention to detail have most defiantly paid off big dividends! Any plans for making the Nats this year?
 
2fine69s said:
Great Job Al. Your patients and attention to detail have most defiantly paid off big dividends! Any plans for making the Nats this year?
Click to expand...
As you know this was my first attempt at building a car, it's not perfect but I am very pleased with it.
Not sure about the Nats this year I have to check my family vacation and make sure the car is tip top if I plan to drive it.

Are you planning to go?
 
AlV said:
As you know this was my first attempt at building a car, it's not perfect but I am very pleased with it.
Not sure about the Nats this year I have to check my family vacation and make sure the car is tip top if I plan to drive it.

Are you planning to go?
Click to expand...

Just got back from Carlisle. Super show by the way. If I can't find a tinted left door glass, I'll make the trip to look for one. If I find one before, I'll stay home and Waite to take the car next year.
 
AlV said:
Or Fore and Aft. lol Either way it's looking pretty sweet!

10450813_650843974997980_1320252615568319181_n_zpsnyxwi3yk.jpg


10367549_653356768080034_1173387255252739698_n_zpszbsmjvci.jpg


It turns out the UCA mounts are fine.. Less than an eight difference between the sides nothing to worry about....I was relieved lol.

10356310_653357168079994_5681900117811302085_n_zpsnxmpbwa7.jpg


I found a replacement Arm so we're good to go.
Click to expand...

What kind of undercoating is that?
 
Guess who got his license Monday?!!

Don't get used to this young fella!

image.jpeg


image.png
 
zkx14 said:
Like Rainman "Dad lets me drive slow on the driveway..." :lol:
Click to expand...
smiley-face-laughing.gif
yeah I let him go around the neighborhood. Then I took him on the Hwy and got on it... his eyes opened real wide and all he said was " HOLYCRAP!!!
 
Installing the New tach. Finally can see the what my current stall is. :)

13925040_1051225388293168_2686925165364322856_n.jpg
 
Installing a stainless puke tank but first I have to make a bracket.
I'm tired of cleaning the floor!

14333032_1088779464537760_774190387386159815_n.jpg


This is what I ended up with for the tank bracket.
I'll install it tomorrow.

14311199_1089179201164453_5013124291015282830_o.jpg


Okay the car cooled down enough to put it in lol

14330069_1089211281161245_8852556653814700234_n.jpg


14359035_1089211284494578_7288907392873989493_n.jpg


No more wet floor
 
Last edited:
You must log in or register to reply here.
-

Back
Top