Stop in for a cup of coffee

-
The alternator wire to the dash side bulkhead connector was loose and shorted out.
Rewired and replaced the connector. So far voltmeter showing we have charge.
 
Morning.
Buddy’s cousin is coming to use the hoist,needs an oil change. Good guy. Does wicked bbq.
Think im pushing fargo in after that. Rain and cold today.
 
Tooljunkie said:
Morning.
Buddy’s cousin is coming to use the hoist,needs an oil change. Good guy. Does wicked bbq.
Think im pushing fargo in after that. Rain and cold today.
Click to expand...
Morning Frank
Sounds like a great day to be in the garage!!
 
Morning. Should grab a couple bags of pellets,make shop toasty.
 
Oh who was the genius that was braggin on it bein 48* somwhere? It's 74 here now. Gonna be like 90. Yall just shut up all that braggin. lol
 
Last edited:
High of 45 today. Rain.
Monday/tuesday sunny and 60’s
And wed thu fri snow...
But im not complaining.actually yes i am.
After my first southern vacation, i have really grown to despise winter.
 
ZMan67S said:
The alternator wire to the dash side bulkhead connector was loose and shorted out.
Rewired and replaced the connector. So far voltmeter showing we have charge.
Click to expand...
Were you guys able to duplicate the factory insulation around the crimp for that wire?
upload_2019-10-5_7-33-6.png
 
I think we are going to preempt that on the Coronet and Swinger. Besides the Coronet is getting the alternator that came with the magnum engine
 
RustyRatRod said:
Hope I am not jinxing myself but if I EVER have trouble with "THAT WIRE", it's comin OUT of the firewall connector and through the firewall "RAT" by itself.
Click to expand...
The one on my car doesn't look pretty - probably from when I had to charge off the alternator after getting a jump start.
My car doesn't need to be 100% original so I'll going to add a parallel wire this winter.
Of course I lots of plans for the winter - we'll see which ones get done. LOL.
 
66340SEDAN said:
Start em young

View attachment 1715403638
Click to expand...

I used to have a picture at work of my older son helping me build a Hemi for my dad when he was 4 years old... He liked using the speed nut driver (worked like a hand drill) when we were changing a trans pan gasket....

It had the text, "Building his first Hemi at 4 years old"....
 
Stephen Hotz said:
We get fuel from 220' supply boat once or twice a month, we get groceries in a container from them once a week. We make our own water with a reverse osmosis desalinization system. It makes about 8 gallons per minute.
Click to expand...

My buddy Doug uses a reverse osmosis to treat the water for his 300 gallon salt water fish tank....
 
George Jets said:
Back when cars were cool and houses were simple. I see most houses in that photo have very tall TV Antenna Towers to pick up the tv signals from the nearby cities. Before cable TV, dish network, and the internet. Lol . . .
Click to expand...

My dad had a rotator on our tv antenna where we had a box with a dial and we marked what position each channel came in the clearest... Then when we watched that channel, we rotated the dial to that position and there was an electric motor on the antennae that would rotate it to that position...
 
Last edited:
krazykuda said:
My dad had a rotator on our tv antennae where we had a box with a dial and we marked what position each channel came in the clearest... Then when we watched that channel, we rotated the dial to that position and there was an electric motor on the antennae that would rotate it to that position...
Click to expand...
Then along came the big satellite dishes.
 
Tooljunkie said:
Morning.
Buddy’s cousin is coming to use the hoist,needs an oil change. Good guy. Does wicked bbq.
Think im pushing fargo in after that. Rain and cold today.
Click to expand...

You should make him bring some bbq for rent on the lift....
 
You must log in or register to reply here.
-

Back
Top