Stop in for a cup of coffee

-
Nothing to see here… LOL. Looks like it will clear out pretty quick - the nasties anyway… Rain will probably go a few hours:thumbsup:

09B9E756-69E7-425C-9E05-487ACCA5AE8C.png
 
Last edited:
Well, I guess it's all good. Seems like changing that axle fixed the issue. But I also changed the wheel bearing. What was happening, was I had a vibration in the front end, and a whoop whoop whoop when I went to stop. All that has gone now. But I think it needs struts also. Will do that next week.
 
Went to start tractor to move some stuff, grabbed the licence plate light and completely changed direction on todays getter done list. Backup lights done too.

GPTempDownload.jpeg
 
WV64Signet said:
Got the major grease and funk off...

Engine is clean/cleaner. Garage is trashed :rolleyes:

View attachment 1716081239
Click to expand...
Just so ya know this is how it starts! Remember when you were just going to change ”one little thing” on the front end of your car? Engines are just like that! I found this cool Holley DP for cheap so I might as well get me a nice manifold, well since I got the manifold it can flow bigger ports so I might as well put on some aluminum heads. Well no point of running those heads if I choke it with exhaust so might as well put some headers on, since it breathes so well I can accommodate more compression, since I am going to raise the compression i might as well punch it out to get more C.I. While I got it tore apart I might as well put a lumpy cam in, next thing ya know ya got a fire breathing Street rod! It is a sickness with no cure!
 
Sublime one said:
Just so ya know this is how it starts! Remember when you were just going to change ”one little thing” on the front end of your car? Engines are just like that! I found this cool Holley DP for cheap so I might as well get me a nice manifold, well since I got the manifold it can flow bigger ports so I might as well put on some aluminum heads. Well no point of running those heads if I choke it with exhaust so might as well put some headers on, since it breathes so well I can accommodate more compression, since I am going to raise the compression i might as well punch it out to get more C.I. While I got it tore apart I might as well put a lumpy cam in, next thing ya know ya got a fire breathing Street rod! It is a sickness with no cure!
Click to expand...

LoL..

ACTUALLY.... I have a D-4B intake sitting on a shelf...
 
Sublime one said:
Just so ya know this is how it starts! Remember when you were just going to change ”one little thing” on the front end of your car? Engines are just like that! I found this cool Holley DP for cheap so I might as well get me a nice manifold, well since I got the manifold it can flow bigger ports so I might as well put on some aluminum heads. Well no point of running those heads if I choke it with exhaust so might as well put some headers on, since it breathes so well I can accommodate more compression, since I am going to raise the compression i might as well punch it out to get more C.I. While I got it tore apart I might as well put a lumpy cam in, next thing ya know ya got a fire breathing Street rod! It is a sickness with no cure!
Click to expand...
If it's a sickness, you should be able to buy parts on your HSA.
 
You must log in or register to reply here.
-

Back
Top