dukeboy440
Well-Known Member
Gotcha, I’ve got the XE285HL but I’m fairly nervous about the flat tappet issues that’s plaguing everyone right now.
Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
MomsDuster
Well-Known Member
Yeah I was nervous also, especially since I was using that FiTech injection and it was controlling the timing. Fresh build and breaking in a cam. I had 3 untested things I was up against. But I followed all the directions to the T and it all went off without a single hitch. Used up a lifetime of luck on that! LOL.
A quick cup of coffee before heading out to repair a forklift truck. Idiots broke it a few weeks back doing donuts in the yard late at night. One of the clowns caught his boot on the wiring and tore it all out. Took a while to figure it out.
I'm guessing the same thing has happened again. No-one will get sacked over this.
I'm guessing the same thing has happened again. No-one will get sacked over this.
dukeboy440
Well-Known Member
For sure. I have nothing but bad luck so I know how this will end
abdywgn
dismantler
can you encase all the wiring in flexible conduit? or put a panel across the bottom of the dash?A quick cup of coffee before heading out to repair a forklift truck. Idiots broke it a few weeks back doing donuts in the yard late at night. One of the clowns caught his boot on the wiring and tore it all out. Took a while to figure it out.
I'm guessing the same thing has happened again. No-one will get sacked over this.
Everything already stamped
It's been apart before. That could be good.
Drove my Barracuda to Florence CO to a show this morning. My car and a chopped more door Dart.
Looking nice!
Unconventional
Well-Known Member
Aged in a fish barrel?
Unconventional
Well-Known Member
Perty slick!
I could and probably should. It is a second-hand machine that has not been well looked after. I found a faulty switch.....ordered up spares, and found one on the shelf at my supplier....got the machine going.
I'll look into a protection bar to cover the switches.
Anybody have a 66 parts book to verify the piston part numbers?
2463265.
My 64 book has P/N 2495072 for standard 3.62" bore.
Engine is a 65 block...
It sure as hell got me. First one I ever had go bad in over forty years of doing it. But I guess I redeemed myself a little on this Ford 400 since I broke two sets of lifters in on it. LOL But you're right. It's a huge problem.
Morning!
No sleep again. Agony is an understatement.
Nothing is helping. Waiting until kim wakes up then away to hospital i think.
No sleep again. Agony is an understatement.
Nothing is helping. Waiting until kim wakes up then away to hospital i think.
Hope they find something simple Frank.
Good morning................hope they get you sorted out Frank.
Sometimes you hit things with a hammer they work again?
So had the pst control guys over yesterday to install the Termite Bait stations. Nice guys, local of course. Should take care of the issues we have. Anyhow asks me If snakes scare me. No not really. Anyhow he askes if he can keep one he sees on the property, sure. Holy hell it was at least a 10' long 6" girth black snake. Never saw one that big. Probably was eating Cats! What you going to do with it. Putting it by my corn cob Bin to keep the squirrels down!
Prays up for a simple and or easy fix Frank
Brakes are feeling better, garden was completely done and I spent yesterday bleeding them, well, a hand vacuum pump worked wonders.
Good morning, Its Member able Mopar Monday. Pert near 18 years ago
Good morning, Its Member able Mopar Monday. Pert near 18 years ago
Good Morning! I have a question for the all knowing coffee crew. If you chop a top where do you get the glass for it?
Good morning guys. Played a little with the Demon again later yesterday. Checked plugs again and you can tell it is leaned out from before. I am happy and it is running great. Hoping to get my 40 in and have Fridays off for the summer starting this week. I would like to swap the new bed on my truck this weekend if possible. And a local car show shakedown run on Memorial Day to test 1 more time before MITP on the 1st
If it doesn't have a flat glass I am out, but I would think a n old arigenal glass can be water sanded or water jet cut or something.. good luck, mybe someone can help that knows
-
