Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
What's up K man
Hmm... thought I posted this already
You just pull these pins out of the block for the Edelbrock?
You just pull these pins out of the block for the Edelbrock?
Yes please
NO Grind them down weld them and machine it flat! 
Back from a Saturday round of hitting the little round ball.
Came home and took the truck to the car wash and then got it gassed.
Heading to Wichita tomorrow a two-hour drive for her aunt's 100th birthday party.
Came home and took the truck to the car wash and then got it gassed.
Heading to Wichita tomorrow a two-hour drive for her aunt's 100th birthday party.
I was going to use a punch and drive them in like a finish nailNO Grind them down weld them and machine it flat!
Wow. Why not just tell him to jerk them off.NO Grind them down weld them and machine it flat!
Sparke
Dukey tell you that?
I was going to use a punch and drive them in like a finish nail
Billy should call you today sometimeWow. Why not just tell him to jerk them off.
LOL make sure you use a roll pin punch then!
I was going to use a punch and drive them in like a finish nail
I was going to use a punch and drive them in like a finish nail
Man this site is as slow as molasses! I bought a stroker from a customer of mine. THe guy (not him) that built it was a hack. He left the pins in and just bolted the intake down. There was 3/4" of black silicone on both ends to slow down the leak. 
Drill the manifold to go over them
Wow. Why not just tell him to jerk them off.
Someone said I should pull them out with a pair of dykes... but I don't want to bother the neighbors...
Someone said I should pull them out with a pair of dykes... but I don't want to bother the neighbors...
Had my phones off all day. I'll have to check
Someone said I should pull them out with a pair of dykes... but I don't want to bother the neighbors...
You're on a rollKaiser Roll?
Oh, good. It's not just me then. Very slow to update and load the page
Just type slower it will catch up
Can't,,,,,,,,,,,go........any ,,,,,,,,,,,,,,,,,,,,slower.
One Mississippi....
Two Mississippi
Three Mississippi
Two Mississippi
Three Mississippi
This site needs a fix cause it's going down. Down to the de....................
Mother Superior jumped the gun....
Mother Superior jumped the gun....
-
