sears $12 bet you can get them half off with all the stores closing now.
Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
I put 17 inch wheels on it, First thing, I had to change down to a 21550R17 tire on the front. Rubbed the lower fender lip. Second, It has 11 inch wilwood brake rotors, and the look small in the 17 inch wheel. SO, 13 inch brakes, BUT they stick out further then the wilwoods, SO different wheels/with diff off set to get the 1/2 inch front clearance needed, BUT they are 8 inch wide and the rear are 7 inch, SO to keep the same width wheels front and rear, off set springs.....And on it goes!!
That would work just pricey for something you will hardly ever use. Hey I wonder if they loan them out at the parts store?
pawn shops have better pickin's these days because its all the older stuff that was better.
a lot of pawn shop people are not aware that what they have is the better stuff than what sears has in stock right now ;)
Sears by me is on the closing list, Ron gets some killer sales there with his card, he can buy something for $20 then get 35 back in sears bucks!
Wow I never thought about talking to any one in HF about tools! Not the one here they would give you the deer with the headlights look.
Wow I never thought about talking to any one in HF about tools! Not the one here they would give you the deer with the headlights look.
Most of my stuff is from the late 70's early 80's when I worked in garage stations. I do agree the new stuff is not great. I do like HF wrenches, think it is Pittsburg bought a set for the truck to have been using the dam things a lot in the shop.
Thats what I have, they wouldnt work last time.
LOL I even have a 19/32 snap on wrench forget what I used it on though....
Should have was it rusted on or against the housing?
Its black and white?
Ben Drinkin
Hey bartender!
You can't give up Ben! you'll go through withdrawals, get the shakes, have trouble sleeping.... Women seem to be able to give me up with no problem though...Imma give up Ben Drinkin for lent. LOL@Ben Drinkin
hit the side of the case trying to open the ring.
Nah, look at the spark plug wires....
Ben Drinkin
Hey bartender!
The throttle return spring is not correct for that engine..
plug wire strapped to the fuel line?
Ben Drinkin
Hey bartender!
They're not yellow?
Winner winner chicken dinner! No wire holders in the aluminum fins...
Ben Drinkin
Hey bartender!
How do they get a picture of something before it's made?
Mopar advertisement more than likely. Showing off there "New " engine to the dealers and public.
See, im not totally inept...
probably a display engine, or even a rendering. when I worked for cummins, they did the same thing once the design was done. Built one proptotype, take millions of pics and send off to investors as propaganda .
-
