zkx14
Duster De-ruster
Nothing during show hours, not sure what they allow after hours
Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
Gotta be more specific.i am eventually stripping a 75 duster sitting here.where is he located?
If its an old one like my barracuda i saw a couple on my parts pick on saturday. Could help him make the connection.
First...
Hello and good morning Karl, what shift are you working these days ?
I believe I compacted something, back is still very tender.. That had to be a hot job yesterday Mitch, did you get it dun ?95 degrees here. I'm gonna weld some floor patches in my tenants GTO, in a few minutes.....
Arkansas deserves a picture , on our car plates it reads the natural state, and we have a diamond in the back ground , if there is anything I can do or look for and take a picture with a good camera just let me know.
Me and my 3 legged friend burning on the hill
Good Morning All!
Is it Tongue Tuesday?
Last edited:
N N Need coffee!
![tenor[1].gif](https://www.forabodiesonly.com/mopar/attachments/tenor-1-gif.1715194043/ "tenor[1].gif")
Yes....please???
Some things you can't unsee!
Hoppy you were right about the POR 15 and indexing. The drivers side was REALLY gummed up, had to put a pipe wrench on it after the PB Blaster then that one went in. Passengers side had a problem with the metal on one side of the hex on the LCA, was marred. I ended up having to file it flat so the bar would slide in. Things that sometimes give me trouble, like oil seals with a flat punch gave me no issues but things I've never dealt with did. Drivers side is done except for the initial turning down of the adjuster bolt (4 turns?).
Both T bars are in, will do the passenger side hub on the 4th. Thanks all for the ideas/comments!
Both T bars are in, will do the passenger side hub on the 4th. Thanks all for the ideas/comments!
Usually something simple. Just have to know the system. Glad you got them in!
Just adjust them so it does the job no reason to get it right now without a engine in.
Just adjust them so it does the job no reason to get it right now without a engine in.
dukeboy440
Well-Known Member
I think his is a 73 if I recall right. He's near Ontario
Morning.
Off to work for me, have to drive to our safety meeting in Factoria, so long drive today. I used to drive 1:45 each way, bid a job "up North" and now it's usually 40 minutes. Have a Great Day all and don't overdo it!
Get him to sign up and we can chat here and work out some details.
Taking the 55 to the upholstery shop this morning. The end of the trim running across the drivers door panel about half way down popped off. So its half on. I tried to fix it and decided instead of screwing up the leather I'd just take it in. Said it will be a quick fix, pull the panel off, and get it back on.
Come home clean up the Barracuda, washed the vert top last night, get ready for the 4th July car show tomorrow. Place is about an hour away, the Walter P. Chrysler car show, held every year at his birthplace. So makes sense to take the Barracuda.
Come home clean up the Barracuda, washed the vert top last night, get ready for the 4th July car show tomorrow. Place is about an hour away, the Walter P. Chrysler car show, held every year at his birthplace. So makes sense to take the Barracuda.
How you feeling today memike??
Morning TJ
-
