Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
I will take another look 
Keys. Somewhere I thought someone had posted an illustrated guide.
But this moparts thread has some good info and pictures.
69 ignition and door keys | Moparts Restoration & A12 Forum | Moparts Forums
Such as this one.
Keyways are definately a little different between some of them.
But this moparts thread has some good info and pictures.
69 ignition and door keys | Moparts Restoration & A12 Forum | Moparts Forums
Such as this one.
Keyways are definately a little different between some of them.
Most places have GMs that will work, but it would be nice to have AMC/Jeep logos.I will take another look
Unconventional
Well-Known Member
Gooood Morning all. Happy Holiday.
H'm. Is this place correct?
Key Men - Search results:
Punch in "Chrysler" to the search.
It shows 1963 used different keys.
1967, 8 ,9 are one year only at least visually.
1970 - 82 are the same.
Click on the individual pictures. Lots of detailed info including cross sections and cross reference numbers.
Key Men - Search results:
Punch in "Chrysler" to the search.
It shows 1963 used different keys.
1967, 8 ,9 are one year only at least visually.
1970 - 82 are the same.
Click on the individual pictures. Lots of detailed info including cross sections and cross reference numbers.
Also GM and Ford
I couldn't do any last weekend as it was too wet and windy....
I have to hope for dry calm weather on weekends to get to mine and the neighbor next door... I still have to do hers...
I'll send you a PM later today or this evening.
Ok, time for me to get moving, need a two mile walk on the dredded tred mill, I am determand to stay under 185 this winter, 3 years ago I was 207 lbs, took it off the fallowing spring and summer.. everyone enjoy your day that you was blessed with, tomorrow may never come folks so
View attachment 1715247943
Put in a video with chicks in bikinis for motivation while on the tread mill....
I've had copies made at our local Ace hardware store here...
Nope, I'm actually doing a parts inventorySo... You're going to spend the day on FABO, just like when you are at work....
zkx14
Duster De-ruster
yes, but don't look like original
I just need spares that will work... Function...
Still cold.
Feet got cold and i have had a chill all day.
Feet got cold and i have had a chill all day.
MomsDuster
Well-Known Member
I hate when that happens! Once the feet get cold it’s over! Cold to the core!
Drove the truck i was doing repair panels on over to the body shop.
They are going to hang the doors and paint them.
Then it comes back and i can finish it up.
An absolute piece of crap to drive.
Wouldnt start, had to plug it in.
Wish i never got involved with it.
They are going to hang the doors and paint them.
Then it comes back and i can finish it up.
An absolute piece of crap to drive.
Wouldnt start, had to plug it in.
Wish i never got involved with it.
zkx14
Duster De-ruster
I'm just about ready to use my wood stove. Decided to have a look at the chimney above it to see if it dried out. You may recall that I pumped about 5 gal out of it with a shop vac a month ago... It dried out nicely, and now that I could see the bottom I noticed an object that did not belong there.
Looked like metal. so tried a magnet first. Slight pull, but not enough to grab. Got it out in two pieces with a coat hanger. Someone dropped a 25 ft tape measure down the chimney. screw holding Aluminum case together had rusted away, and the steel tape had rusted into a blob. lol
Looked like metal. so tried a magnet first. Slight pull, but not enough to grab. Got it out in two pieces with a coat hanger. Someone dropped a 25 ft tape measure down the chimney. screw holding Aluminum case together had rusted away, and the steel tape had rusted into a blob. lol
Ddaddy
Just doing what I do
I came across this letter opener and flyer in a box of my grandfathers old thing from his Jenner service station. The damn thing is a lethal weapon!
Imagine what would happen if they tried to give these out as Expo gifts today!
Imagine what would happen if they tried to give these out as Expo gifts today!
Sure that isnt a fish scaler?
Ddaddy
Just doing what I do
It’s a letter and package opener. Kinda looks like a fish scaler on the top of the blade but the nubs are too thick to be able to scale a fish with it.
-
