dukeboy440
Well-Known Member
Gotcha. I’m looking for a running and driving slant 6. For a 15 yr old trying to build his first car.
Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
And I got to drive it......right into my 5h wheel trailer side!!!!
dukeboy440
Well-Known Member
HahahaAnd I got to drive it......right into my 5h wheel trailer side!!!!
IMO, he should either build a honda or a chevy....really, for his first try...
dukeboy440
Well-Known Member
And Ray didn’t whoop ya?And I got to drive it......right into my 5h wheel trailer side!!!!
dukeboy440
Well-Known Member
Yeah well. It’s his grandmas 1976 duster. Slant 6. Engine is locked up in it and funds are non existent so I’m hunting for an el cheapo to help him out.
I put it in reverse, started to let out clutch, and went to give it gas, and the loud peddle was flat to the floor!! It rolled into my trailer. Minimal damage...
Try to free it up.......it might be done on the cheep...
dukeboy440
Well-Known Member
I helped his dad pull the heads this morning, full of water and rust. Walls are pitted like a golf ball
dukeboy440
Well-Known Member
Don’t promise me with a good time
My fault the gas pedal was laying flat on the floor you had to push on the rod coming out of the firewall. I thought I told Tim.
dukeboy440
Well-Known Member
Whoops
Unconventional
Well-Known Member
<~~~~~ half tempted to go to "Night of Destruction" at speedway 
Figure 8s Demo Cross
Figure 8s Demo Cross
They are cast aluminum. Mickey Thompsons
Put new side mirrors on a 94 C1500 today. Maybe an hour to do both, since the door panels had to come off. Done... He came and got it..Been wrapping up stuff on the Harley. Bout ready to take it for it's maiden voyage.....Hope all goes well..... 
Unconventional
Well-Known Member
Got the baffles outa the drag pipes? Got to keep up with the brats on the crotch rockets ya know. Noise-wise anyhowPut new side mirrors on a 94 C1500 today. Maybe an hour to do both, since the door panels had to come off. Done... He came and got it..Been wrapping up stuff on the Harley. Bout ready to take it for it's maiden voyage.....Hope all goes well.....
dukeboy440
Well-Known Member
Hmm I’ll look
Getting all the bits cleaned up and painted.
Decided on VHT satin clear on the intake
Decided on VHT satin clear on the intake
Well, I didn't get killed. First ride on a motorcycle in America since about 1985. Has way more power than I thought it would. That worries me a little bit. But shifts good clutch works good. All is good. Maybe ride a few more times by myself before I take my wife for a cruise. Of course, before I take a cruise I must get a tag on it. Lol. Kkkkkkkk
That's going to really look good. Chris.,..,.
Nice looking scooter Mitchell
-
