100 amp single pulley roundback? Nice!
Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
shittyslant6
Well-Known Member
and shortsIt's short sleeve weather hereHafta see how long it lasts.
Rebuilt by who is the magic question?
Unconventional
Well-Known Member
The wind switched. Comin' from the beach now. Knocked 5° right off the top
Header gasket material ordered √
Hood adjustment bumpers √
License plate screw set √
Parking light lenses √
Quarter window seals √
Cowl drain flap √
Oval firewall plug √
Stainless door lock knobs √
Twin post mirror gasket √
It's fun to go shopping !
Hood adjustment bumpers √
License plate screw set √
Parking light lenses √
Quarter window seals √
Cowl drain flap √
Oval firewall plug √
Stainless door lock knobs √
Twin post mirror gasket √
It's fun to go shopping !
Unconventional
Well-Known Member
@shittyslant6 Ya got us by 4° 
My Brats in Phx got us both
My Brats in Phx got us both
I might try bigger screws to mount my outside mirror. If that plan doesn't work out I may try something like this? The button's should be flush enough. (I would hope)
Awesome!! Congratulations!
So what is the problem with the mirror switch. I missed it
I unscrewed the broken mirror (not OEM) and found 4 holes. The 2 holes I can reuse are too big for the screws provided so I will try some larger screws. . The gasket won't cover the outer holes. I might just seal them with silicone for now. Or may be a small plastic plug.
J b weld the holes all of them. Sand the exposed ones. They shouldn't be thal big touch up paint them, and mount the mirror.
Do you have a rivnut tool?
Do you have a rivnut tool?
can hardly see the holes so not real bad.
I did order another gasket that is more like the oem gasket. It might be a shade longer. If not, $5 lost. LOL
I may have saved one when I quit the tool business.
I very seen guys use just about anything to J B into the hole from tooth pics to golf tees
Yep ya got a hole so fill it.
dukeboy440
Well-Known Member
The factory mirrors on those cars sucked so bad it is very very common to see later model mirrors on them. Mine has a pair of A body dart sport mirrors on it
dukeboy440
Well-Known Member
I’d try some of that 3M body tape, the mirror body will likely cover up that hole.
Tnisesm 135Pcs 8 Sizes Nylon Plastic Hole Plugs Black 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 7/8" 1" Round Drill Hole, Furniture Cabinet Insert End Caps Industrial Hardware Biscuits & Plugs
Here ya go Mike fill the plug with j b push it in the hole and screw down the mirror.
The kit is 10 bucks on Amazon
Yep ya got a hole so fill it.
Fred the voice of experience.
dukeboy440
Well-Known Member
Weld it. Problem solvedFred the voice of experience.
@toolmanmike want a pair for the garage?
A pair?
-
