2019 summer race.... Jadaharabi vs 318willrun

who's got this race ?

  • J par - hard to beat a guy that has 4 of everything

    Votes: 6 12.5%

  • Jadaharabi - are you kidding me? this guy is working on a stock eliminator

    Votes: 23 47.9%

  • 318willrun - no plan, other than brain cramps thinking of one

    Votes: 19 39.6%
  • Total voters
    48
-
fishmens67 said:
Are you pushing the rear mounted distributor engine down the street or to the dump. lol just kidding
Progress is always nice.
Click to expand...
.
What I should have done was put a fan on it and a battery and some fuel and start it up and let the fan pull it down the road.
 
fishmens67 said:
Are you pushing the rear mounted distributor engine down the street or to the dump. lol just kidding
Progress is always nice.
Click to expand...
.
Engine and car are now in the same garage. I did prime the pump on it with the cordless drill. Showed 80 psi.
 
Last edited:
Do you care to provide the internal details of the engine
 
Jadaharabi said:
.
I put a new oil pump in it and timing chain and a chain tensioner and drilled every other piston for compressor enhancement.
I'm figuring about 2000 hp.
Click to expand...
oh a secret build, I see. But it still has the distributor in the rear, so it can't be much of a secret. lol
 
fishmens67 said:
oh a secret build, I see. But it still has the distributor in the rear, so it can't be much of a secret. lol
Click to expand...
.
Yeah I had to move it from the front for muffler clearance.

You missed the lack of a water pump. It's air cooled frees up about 200 hp not having to drive that power robbing pump and coolant. Plus less weight so I can run my super flow cast iron truck intake. This is some Top Secret go faster stuff so don't tell anyone.
 
Last edited:
Wow! your further along than I am. Looks Great for a 408 !! :D Seeing this picture you posted makes me want to finish up the Ramcharger and get busy on my build...
20181221_154025-jpg.jpg

00P0P_lbR0I73sUGq_600x450.jpg
 
crackedback - hey, I need your expertise :)
I'm not much for bolt in frame connectors, but in this instance I might like the idea. Your thoughts on how well they perform their function ??
 
318willrun said:
I asked the question, didn't I ? LOL...
Crackedback was the first one that came to my mind for the answer.
Click to expand...
I reckon if you had them already or someone gave them to you for nothing you could drill holes and get into there and bolt them in maybe. But why someone would spend over $150 for basically A straight piece of metal that you usually end up having the weld in anyways is far beyond my comprehension. Me personally I just went and bought a 10 ft piece of Steel for thirty bucks and had them cut it into two 4ft pieces and a 2-foot piece left over. Worked like a charm.
 
You must log in or register to reply here.
-

Back
Top