Search results for query: *

  1. Northern Grit

    Light location help

    It may be for the temp/blower switch illumination.
  2. Northern Grit

    What is this tool thread?

    Guess #1 suspension height gauge, Guess #2 drive line angle gauge.
  3. Northern Grit

    Compressor cycling frequently

    What kind of duty cycle are you expecting to see? 30 seconds doesn't really sound abnormal to me. Most of the R134a systems will engage the clutch for 5-15 seconds (depending on heat load, humidity ect) and then disengage for about 15-40 seconds until the pressure in the accumulator drops back...
  4. Northern Grit

    Balance Drag Tires?

    Started a new job about 6 weeks ago witch has put me in closer connection with all types of racers... stubborn, opinionated, outspoken racers. Anyway here is one debate that has been circulating through the shop lately and I was just curious how you guys feel about this. Driver "A" states...
  5. Northern Grit

    What is this tool thread?

    Metering jet tool, Ford Rotunda
  6. Northern Grit

    What is this tool thread?

    I wanna say they were for the old mistubish 4 banger that was in the D50 trucks, but not totally sure.
  7. Northern Grit

    What is this tool thread?

    Belt tensioner tool?
  8. Northern Grit

    What is this tool thread?

    Lifter puller/remover?
  9. Northern Grit

    What is this tool thread?

    The old snap on tune up kit, for adjusting carbs, dizzy and bending linkages.
  10. Northern Grit

    do i really need

    No you don't NEED it, in fact many car were built without them and still roll from point A to point B without issues.
  11. Northern Grit

    Hemi Help,,, and,, I saw a Robin !

    I've used this on several engines (392 but not tried 426) and it has worked well every time. Got it from OTC but it dose not have a brand stamp anywhere,
  12. Northern Grit

    What Gen III Hemi dipstick tube are you running with a swap pan and headers??

    It might be worth a shot to try the truck dipstick and tube, #53021322AF . Not sure if it will hit somewhere but the bend and mounting points are different than what's pictured in OP.
  13. Northern Grit

    Should I have a bulge?

    I just looked at a 75, it has the same bulge... but I'm not crawling under there to look for numbers.
  14. Northern Grit

    Jeep LSD

    Yes it dose. The spec. is 4 fluid Oz. or 118ml. I usually just dump one bottle in.
  15. Northern Grit

    What ya-all know about refrigerant dye?

    I know FCA stared doing it in 2011 on some models, and now today on every model. I know most new GMs and Nissans have it from the factory also, but no idea about the other makers. Also the yellow glasses help tremendously with the black light.
  16. Northern Grit

    Redneck Camshaft

    Looks like he also has flame throwers hooked into those pipes!!
  17. Northern Grit

    2008 5.7 value?

    The last time I replaced a 5.7l in a Ram the junk yard engine : 75k miles, intake, t-body, fuel rail and injectors, coils, timing cover, water pump, oil pan, flex plate, ex. manifolds, and 1yr warranty was $3400. I've found similar on Craigslist minus the warranty in the $2500 range.
  18. Northern Grit

    Electric car fail

    It wasn't REmoved, it was just moved to another section.
  19. Northern Grit

    Check this out. A 270 slant 6

    I especially like this part, "For any gear heads out there this is a all steel motor which is hard to come by any more". I'm pretty sure us "gear heads" could see through the BS in the first paragraph LOL.
  20. Northern Grit

    Check this out. A 270 slant 6

    I just saw this one recently
  21. Northern Grit

    Small Block Engine Leaning. Need Suggestions!

    In the 3rd picture the driver's side mount bolt is through the lower ear hole, and the pass. side is through the upper ear hole. Do you have enough "wiggle room" to set them both on the upper or lower holes?
  22. Northern Grit

    Old gas

    In the sealed can it should be fine. I burn 2 year old fuels frequently and never really noticed a difference. Just my opinion though, I don't know the science behind fuel life.
  23. Northern Grit

    Welded upper balljoint.

    Probably overkill. I usually do 4 small welds around the top, that way the heat doesn't cook the cup portion and you can just grind it off for future service.
  24. Northern Grit

    Middle of the Year - where are YOU at ??

    Those headrests are free at the dealership. Extended warranty number X87 for a known failure issue. Covers 2012-2017.
  25. Northern Grit

    How do I clean rust stains off my white sidewalls? PROBLEM SOLVED

    S.O.S. pads and water will work wonders on white walls.
  26. Northern Grit

    Mr. Fixit.....

    Got I nice "new to me" pressure washer free! It was offered to me with a "bad motor". It would run poorly for a few seconds only on cold start and then stall, each pull after the stall was real tight, almost to the point of breaking the pull rope. I took it home, tried it out and sure enough...
  27. Northern Grit

    Mr. Fixit.....

    When I was a kid I saw my dad throwing a VCR in the trash (they were actually valuable back then), he said it was "totally done". I pulled it out of the trash and took it apart, found one of the belts had dried up and cracked apart. I found a rubber band that worked as a replacement, then I...
  28. Northern Grit

    Never done this before (no header gasket)

    Had a set of hooker headers on a small block that would always leak at the gasket. After 2 sets of gaskets failed I used Grey rtv without any gasket, after that they never leaked again.
Back
Top