Search results for query: *

check the points and condensor ... sounds like a loose condensor

none of my mopars ever had one- just the plastic washer under the crank

I use the white cardboard looking el cheapo gaskets doubled up and never had a problem with them seal great and last long time

I use the black rubber fel-pro too and they are reusable with a little care

My beater truck, bought it 1 1/2 years ago for $700 with new tires on all 4 corners and only 127,000 miles (low for a '92) Runs so good that I haven't even opened the hood except to check the anti-freeze. Now its gonna be my tow vehicle

On my car I set a reasonable value I could live with if totaled and checked the premium. When I realized I could afford more premium I raised the value of the car accordingly

I bought one too (quick jack) and it seems stable enuff for about any kind of work. I made some riser blocks to hold the large rubber blocks and gives about 4 extra inches of lift. I had to do this because of my sidepipes, the rubber blocks weren't tall enuff to keep from crushing my exhaust...

http://desmoines.craigslist.org/pts/4935450279.html a body seats

http://desmoines.craigslist.org/pts/4935521505.html Mopar A and B-Body Sheetmetal

http://desmoines.craigslist.org/pts/4938545861.html mopar a body grills on craigslist

only number I come up with is 100-1267 ebay has some and amd has some too Kind of pricey oh ya 67-68-69 frt /rear all the same

can't tell you the part number but the front and rear bumper are the same

never had much fore /aft movement always been left and right .Isn't the mid plate mounted ridged?

My dash pad sat in the sun for 15 years and cracked really bad. After cutting off the part that curled up I installed a cap and it looks great after 6 years. I'd use the cap agAIN If I needed too.

here is my 2 cents worth I always re torque my heads because of bolt stretch due to abuse and heat/cool cycles, and the fact that I am not using torque to yield bolts . Those are the ones that you pull down to 50 # then tighten another 180 degrees. the bolt stretch is figured in on these...

Ya I just bought a good trailer for $300 but by the time I am done with tires, wheel brgs, ramps, and brakes not to mention bracing and other things to make it work for me I will probably have $700 to 1000 in it. Still cheap if you don't count my time and labor. Trailers around here go for...

the Royal Enfield now is called the Enfield Bullet and is a updated version of the original Royal Enfield 500 cc is as large as it gets now. We used to do some warrentee work for one of the dealers locally. Fun bike but a train wreck when it comes to parts network for support Now if someone...

I prefer the old British bikes too. I still have a '76 Bonneville 750 that I keep saying I'm going to break out again. I ran a Brit bike shop for about 5 years until I got bored with it and sold it off. Of the 3 Brit bikes mentioned of course Triumph is the most popular followed by BSA but the...

The older I get the smarter I become.... by the time I die I'm gonna be a freakin' genius

I love it when I take the cuda out for gas. I always get a couple people who want to talk about the cars they used to have, but they all ask what is it ? It's like they have never seen a mopar before

I'd take a crappy one piece front end as long as its cheap enuff...I know how to lay fiberglass well enuff to fix one ....just don't want to mold the whole thing

you should tell the company to drop an ad on here ....they would probably get a lot of response what company did you say that you were talking to?

I've got to look it over real close but I know I am going to add a couple heavy duty braces underneath just because it looks a little weak in a couple spots(when it comes to towing I'd rather be over cautious then not). Might even add some extra springs to the trailer and the truck.

I probably will extend it forward cuz I don't like the rear of the car hanging over the back of the trailer (plus the gate don't close but I was going to change that anyway) plus add a toolbox and spare tire mount up front

What company are you dealing with ? I know MAS is gone so who bought the molds?

ya I could pull it forward about 2 feet I just didn't cuz my license plate was in the way

starting to have 2nd thoughts about the trailer after I put my car on it.

Commandments Of The Garage 1.The garage shall be forever kept as the sacred realm of the Man. No lacy curtains nor gingham privacy panels shall be allowed on the windows of the sacred garage. 2.The garage shall not be cleaned, except in cases of extreme need, such as when a pair of holy...

the only thing I have to tow with right now is my 92 dakota v6 auto . I think I will have to get another rig or do some upgrades to this one. It only has 130000 miles on it and runs well but I think the v6 might be a little anemic

After hearing for the last 5 years from friends saying" I can get a trailer and tow you to the track", and no one ever coming thru. I managed to score a pretty nice trailer for only$300. It needs wheel bearings and tires, but the frame is straight and the bed has good wood and ramps. I know I...