Search results for query: *

So my son borrows my 1960's vintage Spark Plug Boot Puller, leaves it under the hood of the car, drives away, and now it belongs to the ages. I need another. Looking at adds and reviews I would like to avoid a junk purchase. Who uses one and whats the best out there for usage and longevity...

Looking for a hood for a 72 Duster close to Southeast Pa. area.

Re-installed 8.75 axle back into car and currently putting the brakes back together as well. The point I am at is putting new shoes on the back plate and re-attaching the e-brake cable to the bracket that is affixed to the rear brake shoe. To say the least, depressing the spring on the end...

Need a set of rear lower shock washers, inners and outers, for my 72 Duster rebuild. PM me if you can help. Thanks.

I need a nice set of rear leaf spring hangers for my 72 Duster rebuild. Must be small bolt hole. PM me if you can help me. Thanks.

I know from an expert that a 70 and a 71 Duster hood are identical and fit both of those cars but will not work on a 72 because they are not adjustable at the hinge area. I would have to change out the hinges on my 72 to make a 70 or 71 work. What I need is for someone to give me a pic of a 72...

I am in need of a small section of the trunk floor, specifically the external section of the spare tire wheel well area between the fuel tank strap bracket area. The area between mine has rusted in the very center so I need to cut it out and replace it with new metal. If any one has a parts car...

Need a ring and pinion set with 29 splines for my 72 Duster.

I have a factory 8 3/4 rear with a 489 case. Suregrip with 3:23 gears. Looking to change the chunk with a swap for another case. Its the factory unit the car came with. Is this considered a small yoke? How many splines would this be? Fine or course? Assuming this is a cone type as well. Correct...

Your ad has been deleted.......Read the 4-sale forum rules before posting again.

Need a pic of the correct unit. Have seen many pics with variations but I know one is correct but which one? Any tips on wiring appreciated as well.

I have been searching for several years for a good set of original wheel well trim to no avail for my 72 Duster. Year one now sells repops. Has anyone purchased a set and if so how did they fit? We all have heard the horror stories about repop trim parts not fitting and I don't have extra dead...

I need a pair of dust caps for a 73 disc brake setup. Struck out at Napa, Autozone, etc.....

I have a 72 Duster that has the lower control arms with sway bar tabs. Car was originaly equipped with a sway bar. The car is now equipped with LBP disc brakes from a 73 with the calipers mounted forward. I would like to put the sway bar on but dont want to swap spindles and caliper mounting...

I have read various posts on FABO that the PValves sold by Inline have been failing so I am steering toward another supplier. Doing a conversion at this time and I need a PValve and was looking at the one sold by The Right Stuff. I have used their lines before and the fit was superb so I would...

Doing some general housekeeping on my 72 Duster. Had to replace the oil pan so naturally the center link had to be dropped. While thats being done might as well replace the tie rod ends as the boots are shot. Adjustors also replaced. I noticed that the grease boot between the pittman arm and the...

Need the four bolts and nuts that hold on the ball joint to the disc brake spindle for a 73 Duster. If you dont have them and know where I can purchase please advise. Thanks. Mike

I need the sheet metal steel inspection cover for my 4 speed 833 trans 72 Duster. Mike

Need an intake for a 72 340 number 3614025. Mike

My 72 Duster is a small bolt pattern drum brake setup in the front. Someone gave me the large ball joint A arms and new Moog balljoints as part of a conversion kit to discs. My question is if I change to the larger A arms and larger ball joints can I stiil use the remainder of the setup that...

What is the best source for a high pressure line for my 72 Duster with a Federal pump?

72 340 Duster. Are all of these painted black? Is it to be a gloss or a semigloss black. How about the pulleys? Detailing the engine and engine bay and would like as much detail help as possible from you guys.

Is the 73 deck lid interchangeable with a 72? Currently have a 71 deck lid on a 72 car and want to replae it with a correct one and this 73 lid is for sale locally. Thanks. Mike

Need a set of nice rear wheel well trim for a 1972 Duster. Let me know what you have. Thanks, Mike

Original 340 code 4 speed Duster needs a new home. It has a 72 340 engine original bore, but not numbers matching,the original 4 speed trans, a 489 case 323 suregrip, and runs well. Front buckets have been recovered, a new carpet add ed along with a new rear package tray. Dash pad is uncracked...

I need a 73 or newer K-frame with sway bar mounts for my 72 Duster. I am doing a front end rebuild which includes a transition to disc brakes which came off of a 73 Duster. I dont want to go after market sway bar by keeping my 72 K-frame as I have read its not a good setup. Staying with the 340...

On my 72 Duster, the headlight switch has finally met its maker. The knob attached to the bar has came completely out of the switch. When this happened I noticed that the ampmeter needle started dancing so there is something evil going on behind the dash inside of the switch. I realize the...

I have a 72 Duster 340 with SBP wheels up front with drum brakes. Yea I know thats primative but I can afford the switch over at this time. I picked up some 14 x 7 rallyes for the back and I need to get a set for the front. I tried the 7 inch rims on the front and they rub against the suspension...

Anyone out there running a Q-Jet on a 340? I am thinking about trying one in place of the T-Quad. I have a stock iron 71 manifold. Anything out of the ordinary needed to make this work? What CFM are you using and how is the performence? What other aftermarket manifolds are out there that accept...

Was this scoop specific only to the 72 Demon? I have a 72 Duster that has this style and was curious. I know from the fender tag that there was no goodies added to the hood from the factory for my car but wanted to know if it was available from the factory for a 72 340 Duster.