Search results for query: slant to v8

Just get the '64-'66 V8 A body cable linkage, bolts right in. Only the slant 6 used the mechanical pivot rod linkage. The later linkage can be made to work, too- but it's not a bolt in.

122T is for early V8 in the narrow body cars with the small bellhousing (and slant six, different bolt pattern tho). 130T is for all the other V8 apps with the caveat: they are available as neutral/external balance and 6/8 bolt flange (this is greatly simplifying things, but you get the gist...

Hey together, I am looking for the parts to swap my early a (1964 Dart) from Slant to V8. Meaning I need the gas pedal, centerlink, throttle and kickdown linkage, and potentially a sb pushbutton 904 If you have things to sell please let me know BR Simon

Welcome aboard, from another 66 owner from Northeast Arkansas, ask anytime and let's get a restoration thread started when you get a chance, I have been getting Victoria ready with a V8 after enjoying her for 6 years with her great slant six here. Love to see where your starting at and see...

Having work for Chrysler for 14 yrs starting in 1974, I have a decent amount of knowledge as to what fits what, interchanges, etc. I'd picked up a 1986 AT trans for this project and overhauled it, so should be ok there. Now, after having done the dastardly deed of removing the R frame mount ...

Hi guys I envisage the possibility to swap my slant-6 to a 318, but want to keep my A-230 3-speed gearbox. A non-irreversible swap as I would use a Schumacher (or Trans-dapt) L6/318 conversion kit on my original K-member. Is my slant-6 clutch compatible with the V8? And what's the bellhousing...

Hi guys and gals, I'm trying to replace some bad power steering hoses on my wife's "new" 1975 Dart Sport. It was originally a slant 6 but was swapped to a 340 with a Saginaw pump. No matter which site I look at, I'm seeing hoses with a fairly straight section on the pump end, and hers is more...

I finally got my motor back together and in my car. I used the slant k member that was in the 68 the one in the V8 car was to rough.Bought the motor mounts they worked great I see why I had to cut the hole in the floor I will be posting pictures the only ones I could find didn’t show how the...

I have 2 slants, one an auto and the other a manual. I have several V8's as well. I did a 5.9L swap into my 72 Charger. IMO I would keep the slant 6. Everybody has a V8 these days, how many people still have the slant 6. The slant is a fast peppy motor when it's running right. My slants will go...

Factory Service Manual does not list different coils for Slant 6 versus V8. The 1.5 ohm coil and a 0.6 Ballast Resistor is the best match to the Factory Electronic Ignition set up.

Commando, meaning 273 V8 four barrel. Yes all original V8 car. Data plate, vin, and engine casting numbers show this. I think I'm going to switch it back to 10 inch drums and buy new shoes. Who knows what happened over nearly 60 years. Just trying to understand these brakes. I did see an...

The hands down best fitting headers I ever installed Ford, Chevy, Mopar or anything else was the set of Dougs Headers I put on my 65 Valiant with a 360. I followed their instructions, used the Schumacher slant 6 to V8 mounts and they fit like a glove. No contact anywhere. I even used the slant 6...

Trying to find a nice 4 door Mopar is tougher than some 2 door cars. I have been looking for quite sometime such as a 1980 Aspen or Volare'. I prefer a slant six over a v8. Done with project cars. Finding something really clean is almost non existent

I like the Slant 6 and I'm not gonna let anyone else stop me from liking it. It's a cool engine and there's really not much else like it. I think even you'd be impressed with what the headers have added. I know I am.

I’m looking to put a BBD carb setup on my ‘65 Dart w/ a slant 6. I need a floor mounted, cable actuated pedal assembly including the piece w/ the lever that the pedal pushes against. Thanks!

I sent them an email but they seem to be confused on what I’m talking about. They insist that slant 6 and V8 boxes interchange, and yes they do, but they aren’t the “same”.

Don’t let someone try to sell you a “V8 k-frame” ….1963-1966 slant six and V8 are the same. If upgrading to a V8 it’s also a good idea to get V8 torsion bars and bigger 10” or disc brakes…also the stock 7 1/4 rear won’t hold up to a V8 unless you plan to never get on the gas hard.

What's your estimated power output and boost level? A more mild build may be able to run one of those inexpensive 340 lph pumps. TI is the same as Walbro - I'm running one of their 255 lph external pumps for a turbo slant six, but it's likely a built V8 may need two of their pumps. I've seen a...

You don’t pay a hooker for sex. You pay her to go away after.

Drive and enjoy the simplicity.

Some of you may know that I am planning to swap the motor in my 73 Dart 4 door from a 225 slant six to a period correct-ish 318 LA V8. Well, I feel that this decision may be harder than I thought, because now I'm starting to like the slant 6 now that I have running like champ with all of it's...

Hey FABO. I have a 63 Dart GT convertible without a drivetrain. So, ideally, I'm looking for... 225 slant six/pushbutton 904 combo and Drive shaft to drop in and make it go. Or... Everything to make a 80s 318/727 work. Motor mounts, 64-66 V8 K member, dropped center link, and floor shifter...

His definitely looks like the slant 6 version to me. It's not exactly straight - it's got a slight drop to it (bottom picture).

Greetings All, Just purchasing a 64 Barracuda project car. Originally was a V8 car with PB automatic, both of which are now gone; as is the driveshaft. For my needs, a newer (early to mid 1970s) 225 slant six and 904 combination would seem to be easy to find, do the job I need it to do, and...

OK, so on my slant six I was running a 3 ohm Pertronix coil, no ballast resistor, with factory mopar electronic ignition. I'm swapping to a v8, and I read on the Pertronix website that the 3 ohm coil is for 4 and 6 cylinder applications, but for a v8 one should use the 1.5 ohm coil? Am I not...

Plan is to use a 383 block from a 65 Newport and stroke it with a kit from 440 Source.

"Theirs" might be the same. This is why I suggested simply using a stock box. This is the kinda crap you run into in the aftermarket.

I have a 73 Scamp with a 72 340/727 and I’m wanting to get new transmission cooler lines. I had to swap the original slant 6 radiator for a V8 one with the driver side inlet and the used one I got I have no idea what year it’s from. I see Mancini and in-line tube shows a different part for 70-72...

The issue with the pan is not the center link. It is the front part of the sump. The later pan hits the K member. @briansb71 If you want to keep the PB shifter, send me a message and I'll give you my phone number

That sounds nice! The cam definitely elevates the /6's game.