Search results for query: *

Hi guys you all have been amazing. I have a 413 wedge v code. The casting number looks legit. Here is my problem. The books all say it should have a RB under the casting. But I have a R L. ? Strange The date code looks like 2.64. Any thought about the RL. Casting. Passenger side says Ndrl...

I have a 68 dodge dart that had old pints and single field regulator and slant 6 I put 360, went to MP ignition and wired a new style regulator. All that splicing... Tried to use revenator box and I've got wiring issues. Classic industries has modified wire harness for the upgrade all ready...

Hi guys ! I'm getting the dart all finished up. I have a later 904 Trans. The plug looks correct. I fallowed the plug from tail light. Looks like it goes to junction plug under driver kick panel. The plug from tranny goes to fire wall in engine bay. Is there a connection from fire wall to that...

Hi guys! My race / street 904 with tci kit and trq converter has about 30k on it. It's acting up. On occasion when I start it it it won't go into gear. Cycle through all gears nothing. And then boom it works. ??? The strange thing is once it goes into gear it shifts fine. Burnouts, second gear...

You guys fixed the scamp. Thanks. I need to fix the HP Dart now. 68 dart 360 Electronic ignition Mp distributor Chrome box Protonix coil. Stock 8om resister In heavy traffic it gets hot and sputters. Then cools and fine. I wanted to upgrade. Been awhile. Maybe even the new revenator...

I asked similar questions last week. I changed plugs / wires. Cap rotor is fine. Cleaned carb. The car runs and starts great. Tonight on the way home on the freeway at 50mph the car just stops. Like the key was turned of. Tried to start. No luck. Pulled over waited. Started and ran great...

Hello guys! YOU are needed again. I have 72 scamp 318 v8 2 bbrl. I have a recent development. The car is having a random hard starting issue. especially after the car sits for a period of time. It will crank but not start. In the morning when its cold i put a ink pen to open the butterfly a bit...

You guys are the best. Have not let me down yet. Symptom... When warm and I crank the wheels making the power steering pump work the motor wants to die. At idle with a/c on it wants to die. At idle when hot (not warm) in traffic the motor surges up and down and wants to die. When it's cold runs...

Hi guys. You have not let me down in the past. I need a heater delet plate for 68/69 dodge dart and maybe even the heater core plate that goes in engine bay hole :). Trying to go old school hemi. Plus I can't find a heater switch anyway. Lol. Thank You !

Looking for a 489 / 742 case with 391 gears. Complete ready to bolt in or one ready for rebuild. Thanks Dale

I have a 360 in a 68 dart. electronic ignition conversion. beefed up to 425hp at crank. I went to the chrome ignition box per this site and also put in a pertronix flame thrower coil. Ran Fine. Put new demon crb 750 ran fine. Very fast. for months and months.Then wanted to go old school and put...

I need two 15x7 or 15x8 Small bolt wheels. Any style. I need for the drag strip for my slicks. Thanks Dale

Anyone know where to get a 28x9or10 x15 cheater. Im stumped. Coker, Towel City, Hurst, all make really cool ones but they are all over 28. I have been told that a 28+ will not fit a 68 Dart :violent1:. The odd thing, my bf goodrich 275x60x15 are supposed to be 28 but they are only 27 1/4 on...

I'm looking for clean, set of 4, 14 inch small bolt pattern rallyes for my 72 Scamp. Please help

I'm looking for (2) 14x8 or 14x7 small bolt pattern bare rallyes or any steel wheel. For my drag slicks 14x9 M/T. Please help. Dale

Hi guys I need a new slip yoke for my 904 trans (360 motor) , and im using the small 7260 u joint and slant 6 drive shaft. What spline do i get. I have seen 25, 26, 29, 30... Thanks again guys Dale

So back again guys, I have a 70's to 80's 360 and 904 In my 68 dart original slant 6 drive shaft, and the bushing and slip yoke are shot from drag racing. Im all ready for repair but don't know about the slip yoke spline. (7260) small u joint. I have seen 25,26,29,30??? I thought 25 was 904 and...

Hey guys back again. I would be screwed without all the help. THANKS below is a link for a video of the noise. The eddy heads are new with 3oo miles on them and runs super fast. Adjustable rockers were installed per eddy specs buy big time motor builder. Please help. I don't want to drive it...

Hi guys. My 72 Scamp is leaking from the heater water valve. The car is also a A/C car and I cant find one that looks like mine. Just one in and out outlet. The ones on ebay and year one are 2 to 2 or 2 to 1. mine must not be the correct one. any ideas, By the way, i put the massive heads...

You guys are batting a thousand on all your advise !!! Thank you !!! 2 years ago I put a built up 360 in my 68 DART. 17,000 miles on the motor now and pushing 275 hp 300 trq at the wheel with auto 904. 13.50 @ 100mph 1/4 mile. I WANT MORE POWER ! Please help ! A) Eddy alum heads will give me...

Hello guys ! So thanks for the help with my new scamp. New problem! I cant get hot air out of my heater. The a/c blows ICE cubes, I changed the hoses and thermostat , the air motor blows strong. No heat on defrost or heat. The heater core housing feels hot too in the car. Any ideas? I do have...

You guys were right on with my trans seal thanks ! I just bought a daily driver 318 a/c car. There is a round container with 3 or 4 vacum lines going to carb and what not. I have always been told and feel lees is more. Can I remove the container and lines and cap at carb. All the lines are 30...

Hey guys I'm back for some help. It looks like my trans is leaking a little out of the rubber boot or ring at the end of my trans where the drive shaft goes in. The trans is only two years old and it never leaked. I changed u joints and drag raced hard and now drips and you can see on exhaust...

Hey guys I'm back for some help. It looks like my trans is leaking a little out of the rubber boot or ring at the end of my trans where the drive shaft goes in. The trans is only two years old and it never leaked. I changed u joints and drag raced hard and now drips and you can see on exhaust...

So I'm back again for some needed advice . You Have not let me down. Im racing this Sunday at a bracket event. I have a medium built 360, 9:5 -1 comp, tuned 850 carb , comp cam timing at around 34 degrees runs a little lean under 2,000 rpm but awesome at W.O.T. my best time on pump gas was...

So I'm back again for some needed advice . You Have not let me down. Im racing this Sunday at a bracket event. I have a medium built 360, 9:5 -1 comp, tuned 850 carb , comp cam timing at around 34 degrees runs a little lean under 2,000 rpm but awesome at W.O.T. my best time on pump gas was 13.50...

Im looking for 68-70 3 arm black steering wheel. no tri arm horn just button in center. If anyone has it Im ready . I attached photo of one I missed out on. Dale

So back again for your HONEST answers ! I have a medium build 10,000 mile 360 in my dart. I have had lag and hesitation always for the past year. I have tried everything. I ran 13.50 at 102mph so its not to bad. But that small hesitation drives me nuts. HELP ! When I try to set my timing with...

Hello again. You guys are 100 % on all the info you have given me so far ! I have another one. I just put 10,000 mile on my rebuilt 360e/904t and took it to a dyno and was very bummed when I got the results. I spent 8500.00 on the engine,trans and install(removed blown slant 6). My dyno numbers...

I'm back for some desperate help. You guys are 100% so far. I have a 1968 Dart with newish 360/400hp engine. So a new development , I was doing a little street racing in the valley over thanksgiving with a (70's nova) and had a strange engine problem. Take off was great, nice traction floored...