Search results for query: *

So fresh build on another 360 engine. I sold my last one. This one came out of 1986 360 d150 pickup. Took the whole engine apart and did a full rebuild. Bearings, rings, summit 1798 camshaft, .030 over pistons, speedmaster as cast heads, edelbrock air gap intake, 1905 edelbrock carb, Doug's...

So as you saw on my last thread,I got My duster running with the new to me 360 that I built and after running it about an hour to make sure that my fans and radiator was Enough to make sure it stayed cool and always stayed at 180° no matter what so I decided to check spark plugs this morning and...

Finally my 360 is in the duster and is running! No transmission yet but did a bell housing modification to be able to get the the starter to bolt up to the transmission. Used a truck manual bell housing with the flywheel that came with the engine. Engine specs are: 360, .030 over, low...

Just showing some pictures of a 2009 dodge charger seats that I got at a Pic and pull for a cheap 35 bucks. They do fit in a duster easy. I will have to fabricate some custom brackets for them to stay firmly but nothing I can't handle. The top back fits perfectly. The bottom has about a inch of...

I have a mopar a-body bench seat up for sale. "Still in the car at the moment until someone buys it" the seats are in really good condition the only thing is the sides that sit by the window are slightly sun faded. The cushions and foam are in great shape and the vinyl on the seats are in...

I'm looking for the ever elusive slant 6 to small block conversion kit for 73 and up abodys motor mount kits.

I just got done rebuilding my 360 and just broke it in on a home built engine stand. I put all new bearings in the engine is bored .03 over. It is a low compression smog engine. So stock crank and slugs were put back in. Added double roller timing chain, comp cams 268xe cam, Chinese knockoff...

Looking for a abody 8.25 rearend for my 74 duster. 7.25 rear is trash.

I’m looking to upgrade my duster from the 7.25 that is totally wiped in the spider gears to a 8.25. Now the question is did it matter on that 8.25 if the Jeep was 4x4 or not? I want to make sure that I don’t get a offset rearend. But every time I try to look up the jeeps 8.25 pictures Dana units...

And if so did they work well. 100 bucks for a pair is not bad especially for a known company.

It has been a few years since I last posted anything but still been grazing the forums now and then. When I joined this forum I had a 75 Dodge Dart sport that I was swapping a 440 into. It was a ugly ducking with lots of rust, but I was enjoying the slow process of putting it together. Until...

so I’ve come to the conclusion that a headlight switch that was supplied with my wiring kit is faulty. So I’m going to wire each wire to the old original plug that was still working when I pulled the wiring. But I want to make sure I wire it correctly so I see there are letters and numbers on...

So yes this is the new Ron Francis wiring kit. I’ve called them and there even stumped. Checked over all the wiring on how they want you to do it and it all checks out. I even installed a new brake switch just in case for the brakes. So once I connect the battery the tail lights turn on and the...

Theres 3 red wires so it has me confused I already rewired all the turn signal wires from the other plug. But these two plugs are confusing obviously there to the ignition switch but with all the google search I don’t have a clear indication where each color wire goes where please need your help.

So my wiring in my used to be slant six 1975 dodge dart sport is pretty shot. A lot of burn marks on some of the plugs and bulk head wiring. and most of the wiring is brittle. Now to the question I need to ask. Classic industries has a engine harness for a 1972 and up Abody for a big block. If I...

so the lift on the cam is .510/.525 at 1.5 ratio after I measured with a caliper. But no where where I look can I find these numbers or letters to cross reference the cam. Plus a big UD letters I’d guess would be the manufacture. But nothing I can find on that. Thanks in advance.

So I bought this a body 8.75 rearend for a steal and it came with everything but new axle bearings and seals. Now I’ve been told it’s a 4.88 year set but I’m sceptical about that. Guy told me over the phone it was a 489 case when in fact when I came to pick it up it was a 742. Thank god it...

So I went and out and bought a 85 LA 318 with 302 heads on it. It has been rebuilt recently. Probably never even saw a second oil change it's that clean. Now two of the pistons have been kissed both on the exhaust side of valves. One on piston 7 and the other piston 4. Now everything looks...

i see a lot of post about how much hp with these engines with bolt ons . That's not what I care about. I care more about the torque because that's what I will be doing just driving around town. Now what kind of torque will I get with headers, 4 barrel carb with aussiespeed manifold, Maybe a comp...

I have a 1975 dodge dart with a slant 6. Yesterday I checked the cast numbers and they came up as a 1968-70 cast slant 6. Now my question is since in 1975 the slant 6 went down 90 hp and the 68-70 the slant was rated 145 hp is there anything different between the blocks or is it all smog...

http://littlerock.craigslist.org/cto/3462537001.html I'm going to go check the car out tommorow.. I've been waiting a long time for my next a body and I found this in Craigslist. And seems like the cars all there. The gentlemen says no leaks has 225 slant six and drives it on the weekends. Also...

hello yall im from conway arkansas. my first car was a 74 plymouth duster with the tower of power. i bought it when i was 14 for 150 bucks and till i was 18 on min wage finally got it painted and put a new slant six in it..."mom told my dad no v8" well long story short one year later a deer ran...