Search results for query: *

Some new wheels,tires and a stripe make a world of difference on my Duster!

I am selling my 72 Scamp better known as the Evilscamp, it has a lot of work done to it and the majority is done and done right I cut no corners with this car. The pics posted here are as it sits now, a quick run down as to whats been done to it new qtrs., trunk floor exts., mini-tubbed...

Already did rebuild it everything in it is new also installed a trans go shift kit.

I have been fighting trans. issues for a while now thought they were all straightened out. Got the Duster out for the first time this year a couple days ago, worked great for a while nice firm shifts but after 5 or 6 miles when i would stop it would pull out fine but when it went to shift it...

Just ordered a set for my Duster a couple days ago from Classic industries, should have them Mon. or Tues.

It doesn't, i bought one for my Duster. Still have it if anyone is interested.

Oil pan has been sold! Any interest or offers on the alternator?

7 qrt. pan measures 7 inches deep. Comes with pick up tube and new bolts. Asking $65 plus shipping. Powermaster 60amp single groove pulley almost new, i used it for 1 week had to bump up to a bigger alt. for my fans. Asking $70 plus shipping

Mopar & super bee hats Sold. T-shirts now free shipping within the US.

Duster shirt sold! Mopar and super bee hats pending.

3 brand new never worn hats $10 each plus shipping. 3XL This is the back Front says Aestectic finishers $15 plus shipping. 2XL This is the back Front says Mopar Collectors Guide. $15 plus shipping 2XL Front $15 plus shipping. 2XL Front $12 plus shipping.

Sorry it took me so long to get back on here been kinda disgusted with this trans. problem, decided to walk away from it for a while. Anyhow i'm gonna pull it back out tomorrow, i pulled the pan down and found a lot of fiber material in the pan and filter i can only assume it's clutch material...

I recently rebuilt the 727 in my Duster after blowing the seal out of the front clutch pack, while i had it apart i put in all new seals and a bolt in sprag. Also put in a Transgo 2 shift kit, i followed the directions exactly. Trans is back in fluid is fool (checked it 3 times) it goes into...

I'm gonna order that kit. Would you recommend any changes to the governor? What about the wave ring in the front clutch pack, should i change that to a snap ring?

It should have said 9 springs not 6.

Rebuilding my 727 i had heard that i can ad springs to the front clutch pack to give it harder shifts. Can this be done? It has 6 springs now, how many more can i put and do i need to do any farther mods. to it?

Go-wing reinforcing plates and nuts, these are for Dusters,Demons & Dart sports. Brand new still in the plastic bag. $30 shipped within the 48 states.

It's getting the power supply straight from the battery. I wired it exactly according to directions that came with the kit.

I recently built a 383 for my Duster, i installed an aluminum radiator with dual fans. When the fans turn on it charges about 3/4 of the way up on the factory gauge. It's a 60amp alternator on it now, will a 75amp be big enough or do i need to go bigger like a 90 or 100amp? Not sure exactly...

Thanks for all the info. I'm gonna take a shot at the roller rockers tomorrow, hope there are some improvements with them.

They are 1.5 ratio rockers and pushrods from 440 source for B block with hydraulic cam and roller rockers.

I do have a set of adjustable rockers for it but i don't know how to set them up. What is the best way to adjust them and what do i need to know in order to do so?

The cam was installed straight up, the springs are the correct ones for the cam but i don't remember exactly what they are off the top of my head.

I recently built a 383 for my Duster i used a 509 lift mopar performance cam with stock rocker arms, it runs rough and when i bring up the RPM's it cracks and bangs out the exhaust. I have been told i need to use adjustable rocker arms with this big of a cam and the issues i'm having is caused...

I see a couple i'd be interested in if they come up for sale, drop me a line if they do.

3/4inch Heim joints 2LH 2RH threads plus weld in bungs. $50 plus shipping.

I was always under the impression that '70 had a Go-wing and '71 had the Gull-wing, am i wrong? I know it's 2 different spoilers and i got the '71 version.

I bought a gull-wing for my Duster, but i don't know the exact mounting location. Anybody have measurements?

I have a 741 3.23 sure-grip cone style out of my Duster, works goods has a slight wind but i would rather not tear it apart. PM me if your interested.

They have both been sold.