Search results for query: *

hey rumblefish! Ha I haven't been actively on here for a few years but I still remember you being a pretty active member here. This engine was the old engine out of 7172dusters car. It probably only had maybe 1-200 miles on it since I've gotten it from him. It was a long process putting in and...

Greetings All! Been quite a while since I've posted but had a quick question for you. A month or so ago I believe I blew the head gasket out of the 360 in my truck. (smoke, coolant through exhaust). I was planning on pulling the engine out and going through it this winter but I don't have the...

I had the heads flow tested a couple years ago but have since lost the spec sheet. Can't for the life of me even remember the numbers. The place was in Wisconsin... but that doesn't help neither one of us either.

Casting number is 4027596. Have had about $1100 worth of head work including oversizing for 2.02 valves and valve job done years ago. Have been sitting for a bit so could use a bath in the hot tank but should be great heads I would think. Asking $650 obo +shipping from Minnesota.

http://mankato.craigslist.org/pts/4420178967.html These are mine. You can call or text if interested. Not sure where you're located. Eric

2 Edelbrock 1406 carburetors for sale. One (pictured) was on my truck and running good. The other i rebuild and swapped out and is currently running on my truck. Also have the the 1487 tuning kit. Opened but never used available for $30 for whoever buys one. Intakes are both in good usable...

I need brackets for A/C compressor. Must work with intake with thermostat housing in center. Thanks!

Any feedback on the holley? http://www.summitracing.com/parts/hly-0-76751bk/overview/

the motor is .030 over with venola 8.5 to 1 compression. stock recon rods with arp bolts. the crank has been ckecked dont rememember if its turned. clevite bearings through the whole thing. it has a windage tray and milodon pan. the heads are ported 915 j series with 1.88 int 1.69 exh comp...

Thanks for the responses guys. 5 replys with 5 different carbs. Which tells me at least to get the carb off and choose something else. (At least that's what I think you're getting at?) Also, I forgot to add something. This motor is now in my 1984 W350 Ram, so the weight and gearing is quite a...

I would love an Air Gap but I need an intake with an offcenter thermostat to clear my A/C on my truck and I had the performer lying around. Might be interested in the QF. Haven't heard of QF before though. Gonna have to do some reading up I guess. I've got 3 carbs and 2 intakes lying around...

Hey guys. debating on a new carb. Here is the dyno sheet from my motor before i bought it as a long block. LA 360. Since, I have swapped the holley strip dominator with an Eddy performer intake. It has an Eddy 1406 on it now but i dont know if it's living up to its potential. Would it be wise...

I took the engine out of my duster and put it im my 84 ram. I swapped oil pans from center sump to rear sump. The engine has a windage tray. Will this cause a problem with the new pan? Also installed an oil dipstick (the engine didnt have one...plugged with sealant) but the oil doesnt even...

No... neither. the first time it happened was with the filter i ran all last summer with. I made damn sure I didn't double gasket it with the new one too. I dunno, not a big deal, its not leaking now. Just worries me that something might happen again.

no, just poured out of the gasket, and i made sure it was tight. it was fine all summer too with the first filter that was on it.

Started my 2000 YZF-R1 wednesday for the first time this year. Upon starting it, oil started pouring out of the oil filter. whole crankcase within about a minute. I changed the oil and put a new filter on and started it up again... same thing. Oil everywhere. Yesterday i brought home some cheap...

Wondering your guys' opinion on an oil leak i have. Oil is pooling onto the manifold. Part of the head is exposed (which i'm not a fan of) the oil is gone now but i imagine it ran back into that hole in the head. Is there a reason the intake manifold doesnt match up completely with the head? I...

I saw that one too this morning. Hours later, it was gone. Good luck. let me know how yours turns out i guess

The kit is "unavailable". However, it's still listed on their website. I find it hard to believe MSD stopped making thier main products. They said they could sell me a distributor for $220, more than summit. I always thought jegs was supposed to have good customer service. We'll see i guess

yup, missed a call from them this morning and also received an email. I guess we'll see how it goes. Time to play hardball.

good, glad i could help someone out. Looks like they won't be 1 day shipping as advertised. getting shipped direct. expected ship date 3/14/13

also, if everything shows up to my house legit, im probably not gonna need a 7AL so if anyone's got a new 6AL and coil i'd definitely consider trading.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=310609986042&fromMakeTrack=true&ssPageName=VIP:watchlink:top:en http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=111018652187&fromMakeTrack=true&ssPageName=VIP:watchlink:top:en looks like jegs might have screwed up on pricing. i already...

Thanks for the replys guys, i checked for vacuum leaks, ive got one at the brake booster so i'll have to get a new seal for that. i torqued and retorqued the base gasket down so i think i'm fine there but i will probably put a new thicker gasket on just in case. I already ran into a problem with...

Put a new engine in my truck ('84 ram) and now i'm down to tuning it. I can't seem to get a timing light to work on it. I tried 3 different timing lights but the flashes are very erratic on cyl 1. cyl 3 seems to be a little better (just tried for comparison) swapped cap, rotor and new plug wire...

That would be exactly what i want actually. I just wanted to make sure it wouldnt screw it over completely.

True.... but i have 3 unused small block intakes lying around right now...

Not really what I want to do, but in order to keep the factory air on my 84 ram 360, i might swap my holley dominator intake for an eddy performer. the cam has been custom ground 520 int .540 exh lift. dur @ .050 is 244 int 252 exh. I'll include a pic of the dyno. how is this swap going to...

ha. I'd like at least one of my vehicles to have a/c...

Did a direct 5.9 to 5.9 engine swap in my 84 ram the other day and now when i try to put the a/c compressor back on, the compressor hits the waterneck. The intake is a holley dominator and it looks like the housing is off center more on the stock. Whats the easiest/best way to go about making...