Search results for query: *

Looking for some help from the members here on locating my car I sold 4 years ago.I have reason to believe the drivetrain was pulled and the roller was sold somewhere in the San Diego area.I built the car around myself (6'5) and so I can identify the car if its found.I will post the plate number...

I have some misc parts Id trade for things I need: 1.Complete AC system from a 70 318 Duster,still on the car.There are way to many pieces,and it's heavy.Local trade would be much better.Also have: 2.Complete steering column with wheel.Looks like it was green but has overspray on it. 3.Passenger...

Thinking of pulling the A/C out of my car today,just 318 2bbl car.I'm looking into making it more of a street/strip car and it never gets very hot around here,and that's a lot of weight.Not to mention I need to buy a 4 bbl intake and carb.Can anybody tell me what the complete set up may go...

Just wanted a general opinion on what a stock set of 14x5 (?) SBP steel wheels and hubcaps are worth.Im not thinking much,just wondering if they are worth enough to get some tires for my new wheels,and I don't want to list them to high.Obviously they are only good for rollers or a non muscle...

Bought a 70 Duster with a 73 passenger side door on it.I need a 70 passenger side door glass and regulator hardware for the gutted 70 door that also came with the car.I have a complete 73 passenger side door that I will be removing as well as 2 1970 driver side doors complete and rear pop out...

Looking for a passenger side door glass for a 70 Duster.Also need misc hardware for the regulator.Have 2 complete 70 drivers doors with glass,a complete 73 passenger side door with glass and also 70 rear pop out windows for trade,or I can buy outright.Thanks.

Can anybody tell me if any of the 73 and up window regulator hardware and glass works in 70 Doors?Working on a 70 Duster,and when I bought it,it came with a 73 passenger side door installed.The seller also gave me 2 complete 70 driver doors and a 70 passenger side that's missing glass and looks...

I have a older Offenhauser Turbo Thrust 360 Power Port for sale.From what I can tell it's never been mounted,I've owned it for 12 years myself,and a friend owned it for at least that himself.The top unbolts and they sell(on EBay)single 4bbl tops to interchange.$300 plus the ride.

Looking for a clean driver side Tailight lense for a 70 Duster.Mine has a hole in the horizontal shelf between the lenses.Also looking for a fiberglass front bumper since my chrome stock one is peeling.Thanks!

Looking for a set of driver quality arm pads for front doors on 70 Duster.I believe I have the bases.Thanks.

So thought I'd pick some brains here.Im working on the interior of my B3 blue 70 Duster.Its completely blue inside,and although last time I painted my old B5 Dusters interior black,I'm actually thinking of keeping this one blue.I just don't see many anymore,and they look pretty cool when they ar...

I have some misc parts that came with a smallblock Duster for sale.Im actually looking for a set of 15x4 and 15x8.5 Centerline Auto Drags,so any of these items Id be happy to trade for or towards those wheels. 4 speed pedal assembly from Duster $250 Offenhauser dual quad tunnel ram for 383...

Looking for a set of small bolt pattern Centerline 15 inch wheels.Im wanting some 15x4 front and 15x8.5-15x10 rears.I have random Mopar pieces Id be willing to trade any of these things or cash.Items I have are: 1973 340 heads and intake manifold Floor shifter Steering column Doors and glass for...

Sorry guys,I know I posted this a few weeks ago.I just got busy and have a weird schedule these last 2 weeks (1am-10:30am).I'm looking for a dash pad for a 70 Duster,and possibly door panels.I'd like the pad to be in decent shape,but doesn't have to be a 70 as long as it fits.Maybe 70-72?And the...

Hey guys,just acquired a running Duster after a long stretch of no toys(had 2 kids haha) and am trying to round up some parts as its a little rough around the edges.Im looking for a lower grille support as this one has rust and is cracked.If anybody has an extra please pm me.Would greatly...

Seeing what the consensus is on open exhaust.Im going back to the track next week,and would like to pull my exhaust for some et gain.Last time at the track the duster ran a [email protected] was with a full TTI exhaust,3 inch with an x pipe,magnaflow muffs and the rest of the exhaust over the axle...

Just wanted some opinions on which carb to use.Right now i have a King Demon RS on my motor with the 975 sleeves.Its on a Indy intake with a two inch Moroso adapter because the intake is still a 4150 pattern.After having it matched to the W-5's i couldnt spring for the extra to have it changed...

Hey guys whats up?Had an oil pump question.When i had this motor apart last month i replaced the oil pump.I previously had a standard volume with a high pressure spring.When i pulled the engine apart for a knock(camshaft)i ended up remachining the whole block.I replaced the standard with a high...

:burnout:Hey everyone.just wanted to say thank you for answering all the questions i had lately.But they paid off.Had a knock in my motor,which turned out to be from installing a fuel pump excentric washer that was too shallow,allowing to much camshaft end play.Luckily we caught it before too...

Also found the reciept for the mains.They measured .004-0043.Whats max on these?

Just had to pull down my new motor for little problem that luckily was avoided.But now that its got the pan off,i was thinking about the clearances.The last time i had the motor apart it went back together with the rod bearings at .0026-.0028.When i pulled it apart this time to go through it the...

Went out to start the car the other day and thought i heard a knock.It went away fast though and didnt come back,so i wasnt sure what i had heard.Tonight went out in the garage and fired it,and yup,there it was.Car was cold so it was idleing rough,and it seemed the lower the rpm got the louder...

Hey guys.Question on spacers.Im running a 1050 dominator on a 416 stroker.Im using a ported Indy intake on a set of ported W-5's.Too keep the cost down i didnt have the intake modified into a 4500 flange,just used a 4500/4150 spacer adapter.Being two inches tall though with a 4 inch air cleaner...

Hey everyone.Hope all is good.I was hoping you could shed some light on the idle speed i should be running in park and in gear.The engine is a fresh combo,and it now has a 712/698 lift,276/280@50 duration Bullet roller in it.Im running a dominator and it's got 14.1 Ross slugs in it.It doesnt...

Hey everyone.Was hoping someone could help with an issue.Just finishing up rebuilding my short block and ran into a problem.When i bolted down the rocker arms on my heads,the roller is towards the bottom of the valve stem,instead of being in the center of it like you would want.I tried shimming...

Well guys.Had a posting awhile back about my car not running like i thought it should.So took everyones suggestions on my quest for 10's.Pulled the motor and tore it down.Put new rings and bearings in,and finding a slight amount of cap walk installed a main bearing girdle.Sent the heads to Shady...

:burnout:Hey guys whats up?Just bought a Cal-Trac set up with shocks and monoleaf.Very happy with the product and the way they helped on the phone.Would highly recommend them.My question is about the install.I have some modified E body superstock hangers.Their beefier then the stock ones.I...

Just a quick question.Just bought an A-2000 to replace a much smaller pump.My question is can i mount this pump above the cell?I know some can and some cant.The setup in my trunk mounts the pump above the cell in the trunk and keeps everything nice and neat.I would like to keep it there if this...

Just pulled my heads and am trying to get ahold of the guys at SD to port them for me since ive heard nothing but good things about them.My question is since these heads are untouched what can i reasonably expect for hp gain from porting these and the intake?Im hoping this is the bottle neck...

Hey everyone.Need help on deciding if i should mini tub my Duster.I want to order my cal tracs but noticed they have ones for inboard springs or without.I dont want to buy twice so i guess my real question is how fast can i expect a mono leaf caltrac setup to go on 275/60/15 M/T drag...