Search results for query: *

yes I did have a post on that question so I do have a mopar additive for the limited slip just didn't know about the weight between the 4 speed and rear end gears

i will be changing the oil in my 833 and 8 3/4 limited slip so can I use the lucas 85-140 in both ?

hi folks what may be the way to go on the rear end oil for a 8 3/4 limited slip? there must be something out there that eliminates the use of the special mopar additive to the oil.

bump

I did use the angle shims and the vibration was a lot less noticeable. i think i used 4 degree so instead of using more shims etc. i would like to do it right.

Hi folks I'm looking for someone in southern ca. that can cut off my old perches and weld on the new ones with the correct pinion angle.(blank magic all on its own) . i have the mopar off set shackle kit and mopar s/s springs.The car seems to have had a vibration ever since i welded on the...

i do agree on the shipping costs. they can add up. i just didn't know if they would run 100 each to coat or if it was 50 dollars each. both items are sand blasted and clean to the metal terry

hi folks whats is an average price for powder coating a 8 3/4 housing and a k-member ? thanks

thanks a million. tried alot of other sights BUT not google

does anyone know if there is a rebuild kit for these?

hi folks not sure if this is the correct forum but i have 2 tickets vouchers for the NHRA finals in pomona for next thursday the 10TH. they are vouchers from AAA and you just need to show your membership card at the ticket window. i have done this for the last few years when AAA would give them...

great place for the performance stuff i had been going there since the late 70 's. to bad they closed.

pauly v.100 i also bought mine from troy at westoaks.

i bought mine new in 2003 was made in canada by cummins for chrysler at that time. i have never had one issue with this motor. with a 750 holley and tti's with a 4 speed and 4;10 8 3/4 the car is alot of fun to drive. and at that time i used a friends name from out of state to buy it from the...

gosh thats great. to bad it just wasn't a numbers matching car

certainly a neat car BUT the second picture DOLLAR HOT DOGS is making me hungry already

you may try going to a wheel/tire store and pick out one and tell the guy you just need to test fit before you buy, leave him a deposit or whatever.i did this when i bought the rear tires for my car.

hi clhyer mopars at the strip ( mats) is in las vegas and spring fling is in van nuys ca.

i really hate when they proudly say they have restored the cars they auction off. restored???used engines,used interiors and thats restored? that show just ruins the word restored. let them continue doing ford,chevys but leave the mopars to someone who knows a little about them. i wish one of...

milodon has a few different depths of low profile pans pending on your engine

again, same here in southern ca. nothing but rain. all i hope for is that its all gone by the time mopars at the strip and spring fling gets here.

yes any of the mini starters would be a direct bolt in for your car. and a big improvement. one starter will fit in just about every chrysler motor.

i loved it when a song would end half way thru and then switch tracks and it would start up where it left off. here in southern ca. muntz was the big brand to have

that is certainly different. would like to have it.wonder if the tree was an option for that year only?

when pulling out the dash of my 68 barracuda found plenty of roaches behind the ash tray. and not the bug type. were surely the left overs from the fellow i bought it from.

remember your options of a crock pot and b.b.q. they can come in handy for the smaller items

thanks dan. sure is real good info. i feel the same as to why my friend's starter won't fit in. makes me want to fly up to washington state and give it a try. except i understand they have snow now. thanks terry

as i understand my friend he couldn't even get the mini starter up into the bell housing area. the exhaust was in the way.hard to believe a standard will fit but oh well.just looking for a stronger full size starter for a mild 440 thanks terry

hi folks, a friend of mine just can not get a mini starter in his 66 cornet 440/auto. a standard starter will fit. something about the exhaust in the way causes the issue. so my question is there a high torque standard starter that will perform as strong as a mini starter? is there a way to...

hi folks i'm looking for some input on using the ca. black plates that were used between 1963-1969. i would like to buy a set for my 68 barracuda.there are a few on e-bay that say dmv clear but will i be charged more money when i go to the dmv with the plates i buy and renew the registraion? the...