Search results for query: *

I noticed my '66 Dart FSM doesn't specify what tail lamp bulbs to use for the single filament bulbs in the deck lid. It calls for 1034 for the tail, stop, and turn bulb, but nothing for the corresponding deck lid tail lamp bulb. Do you guys happen to know which single filament bulb will...

I'm getting my '66 Dart GT back together and I'm hoping someone can show me how far up the A-pillar the door weatherstrip goes. Does it end right where the vent window stops? A photo would be really appreciated. I'd imagine Valiant hardtops and early barracudas would be the same too. Thank you!

Can you guys confirm that the rear view mirror in my '66 Dart is upside down? I've seen them both ways, but this way looks off in my opinion. It's supposed to be wider at the bottom, right?

For those of you with a '64-'66 Dart GT, can you do me a huge favor and look at your front window sweeps (cat whiskers). Are the front inner and out cat whiskers supposed to be the same length? I just installed a set on my '66 Dart and I feel like the outer one should be about an inch longer.

I'm putting the back end of my '66 Dart back together and I think I must be losing my mind. I realize these round white foam gaskets are for the rear bumper, but where exactly do they go? Do they go between the brackets and the mounting points on the car? Other than the two out ones that...

Do you any of you guys have a source for the rosette rivets for the a '66 Dart? Obviously, these are attached in the door jams, so I'm unsure if they are the same rivets as the later model A-bodies that seem to be the rivets that the resto shops like ECS carry.

Just wanted to confirm - The taillight lenses on a '66 Dart are different driver's side vs passenger's side, right? In other words, all 4 lenses are unique?

Does anyone make a simple trim piece that covers the drip rail on an early Dart hardtop? I eliminated all of the excessive (in my opinion) trim on my '66 Dart GT and would like to replace it with something that just snaps over the outer edge like what's on my '68 Dart, if something like that...

I've got two questions on these trim clips for my '66 Dart GT. 1. What type of sealer do you guys use on the screws for these clips? I think they were coated in some type of wax from the factory. Will a urethane seam sealer work? 2. What trim besides the rear window used these clips? I'm...

Did '66 Darts come with different length solid steering column shafts for power and manual steering (if they even came with power steering)? Or are they a two piece expandable design like they used with the later collapsible safety columns. Stupid me, I can't seem to recall from when I rebuilt...

Does the headliner on a 63-66 Dart hardtop come all the way down the C-pillar? I only ask because I saw these sail panels on the Classic Industries website and now I'm a little confused (happens often). Do these panels simply install underneath the headliner for additional support? If so, why...

Are '66 Dart door hinges the same as the '67+ hinges. Looks like the kit Restorick sells is for '67+, but the hinges on my '66 look identical to those on my '68. Does anyone know what the differences are? Would the kit for the '67+ work on a '66?

I'm prepping to install a new headliner in my 66 Dart hardtop. I've got all of the headliner bows (6 total) in the correct order and the two wire clips for the rear-most headliner bow. In reviewing the FSM, it mentions a "drive nail" in Dart models that attach the #5 listing to the quarter...

Does anyone know what applications use this particular deck lid hinge nut insert? It came off my 66 Dart and I noticed a crack in one of the threads, so I was going to place a wanted add. I'm curious what years and models use this particular piece?

Does anyone happen to know which route the stock dome lamp wire takes on a 66 Dart GT? I'd imagine all hardtop early-A's would be the same. Does it go to the driver's side then back and down the sail panel/C-pillar?, or does it go forward and down through the A-pillar?

I'm rebuilding the door guts in my 66 Dart GT and I'm trying to figure out what these anti-rattle pieces are supposed to look like. Are they just a rubber band-type piece to act as a bumper on the window stop brackets? Here is the diagram out of the parts manual: Here are what my stop...

I'm trying to find the roofrail weatherstrip for a 66 Dart GT. Everywhere I seem to looks has them listed for 63-65. Is there any reason why these wouldn't fit a 66? For instance, here is the listing on DMT's website: Mopar A Body 63-65 Dart PREMIUM Roofrail Weatherstrip Set

Does anyone have a photo of a dome lamp for a 66 Dart? Is the the same as the dome lamps for a 67+ A-body? For some reason, I'm unable to find the one off my 66 Dart. I know it's around here somewhere. Thanks guys.

Does anyone reproduce door and/or quarter glass for a 63-66 Dart hardtop?

Does anyone happen to know why the 63-66 Dart GT window felts (cat whiskers) would be different than those for a non-GT hardtop? I'm having a hard time finding what the difference would be. The gentleman at DMT didn't seem to know, but did say he'd reach out to their supplier to try to find out...

Where do you guys get your rear window gasket/seal for a 64-66 Dart hardtop? Do they use a lockstrip?

Does anyone happen to know what the order is for the headliner bows for a 66 Dart (hardtop, if it matters)?

How are you guys mounting your passenger side mufflers/exhaust on your early A's? Photos would be great!!

I just finished putting the brake pedal and parking brake lever assemblies back under the dash in my 66 Dart and can't figure out where this spring goes. Is it even original??? I already have the shorter spring installed for the parking brake lever under the dash. Any ideas where this spring...

Hey early A body guys! Do any of you have a photo that shows where the retainer tabs/clips hold the passenger side brake like on the firewall are welded? How many are there??

Do any of you early-A guys have any photos of your installed driveshaft safety loops. I've got a universal loop to install in my 66, but it looks like the front parking brake cable guide is right where the loop needs to be, so some creativity is needed. Just curious how you early A-body guys...

Have any of you early A guys replaced their slant six throttle pedal assembly with a later model cable-type pedal assembly like pictured below?? Seems like a pretty straight forward swap. Am I missing something?

Have any early A guys here install subframe connectors?? Were you able to utilize the stock parking brake cables and set-up?

I'm refurbing the parking brake cables to install in my 66 Dart and came across this bracket with my cables and other parking brake hardware. Any Early A body guys know where it goes??? I'm not convinced I need it. It doesn't seem to show in the FSM, unless I'm missing it. Any ideas? Thank...

For those that have built big block early A's, did you guys shift your master cylinder over? I'm noticing that the master cylinder in my 66 (w/ 400 BB) is really close to the DS valve cover and will likely move the master cylinder over slightly to accommodate. What have you guys done???