Search results for query: *

Ok guys, I know the debate is out there on 904 with a 8 1/4 VS a 727 with a 8 3/4 but Im going to keep the 8 1/4 and 904. So anyways I have a 360 with a stock 1974 904 transmission currently but I have a new http://www.summitracing.com/parts/ape-53022/overview/ TQ going in it, and the 8 1/4...

I just changed to a 3.21 gear in my 1974 dart swinger and now my speedo is off, where do I get a new one?

These master rebuild kits I keep seeing for the 8.25 are like 100.00 is there an more affordable solution? Do I really need the entire master kit?

Ok so I have a 1974 swinger with a mild 360 getting ready to swap out a new cam to a purple mopar or a voodoo, I still have the stock 904 and TQ and stock 8 1/4 rear with 2.45, my question is I am tight on money, should I buy a bigger TQ first or swap gears out to higher gears for the rearend? I...

ok so I have the cover off my 8.25 what numbers tell me what ratio it is?

Ok so my car is a 1974 dart swinger 318 original car, was looking at a suregrip unit but it says will not work with a 2.45 housing, my car dosent have that housing does it?

Is there any "CHEAP" brake upgrades to make to my 8.25 rearend in my 1974 dart swinger?

ok, so I am pretty sure this is what I am going with... for my 1974 dart swinger 360 what do you guys think? http://www.summitracing.com/parts/dcc-4529273 http://www.summitracing.com/parts/mgr-r8-25rmk http://www.summitracing.com/parts/rmg-scr82503

I am looking at boss hog TQs for my 904 and they have a 11" and a 12 inch 2800 stall the 12 is cheaper then the 11 will I be ok with the 12? Car is a 1974 swinger 360 with a 904 big mutha thumpr cam needs a 2800 or bigger

what ram rearend is this?

so there is a few topics on here but I can not find a comparable length, will a fox body 8.8 fit under a 1974 dart swinger? with out a TON of fabrication?

I have an original 1974 swinger 318 904 8 1/4 car, what spline is it 27 or 29? or something else?

How hard is it to find a 8 1/4 suregrip and what autos have them?

I have a 1974 dart that had a 318 with a 904 and a 8 1.4 rear end what would be the stock convert?

I found a 2001 ram 4x4 V8 magnum in a junkyard with a posi traction rearend, I think its a 9 1/4 has anyone ever used one of these?

Ok so Im going to go with a manual dakota transmission, what and all will I need from the truck? and what years does the 5 speeds come in, and what are they called?

Where can I find an affordable 2800+ torque converter for a 904?

ok so we swaped to a 360 internal balanced motor knocked the weights off of the converter and when we tried to use the new B&M flex plate the starter was hitting the flex plate were using the stock flex plate now with no problems so whats the deal? car is a 1974 swinger 360 internal balance...

Ok so my spedo was working great untill we just swapped out the 318 for a 360 we used the 904 that was on the 318 but now the spedo dosent work we have checked the spedo cabel to the trans and to the dash and neither are the problem, so what would it be? Car is a 1974 dart swinger 360/904/8.25...

Hey guys getting ready to buy this it says 8 1/4 posi but how can I be sure its not a 8 3/4 posi? or just a crap chunk? http://detroit.craigslist.org/wyn/pts/2324848012.html

Hey guys I know there is no such thing as CHEAP, but where is the best place to buy a new reasonable 8 1/4 posi?

hey guys I have a chance to buy a small bolt a body rear 8 3/4 the question is can it be turned into a big bolt rear and if so will it break the bank or would it be a good way to go? the rear is going to cost me about 200.00$

well we have a 1994 dakota 8 1/4 six lug rear-end laying around, the 55 inch one is it usable for anything or scrap it? the housing is good the pig is junk