Search results for query: *

SO my new factory distributor had stock springs, I got the Mr Gasket spring kit.pulled 1 heavey spring and put 1 lighter spring in. Awesome throttle response,but it pings at part throttle but not at wot.360 30 over 9 2 1 compression.18 at idle and 34 , full advanced i have put my old dizzy...

I have just put in my new dizzy after having a shop change the 1 advance spring. I had one left over from my MR Gasket . now it pings big time, tried to retard her some help a little, but lost some power.i think that spring is too light advancing to fast, who has a few to choose from.THOUGHTS...

My battery is almost 6 years old, what is better 800 cca or 650 cca, my 71` has 360 with 9-1` compression.just priced out some and wtf are building them with gold.

Good day all,hows things in mopar land.the MR gasket advance kit 925 B in the kit are the 2 springs the same, i want to speed up the curve. i have a bag of left over with the old heavy spring and 1 new MR gasket spring.thanks gents.

Thinking about the Mad bypass,so lets see if i have it right, so hear goes. i remove the red and black wire at the bulkhead, run a 8 gauge wire from alt join the red and black together then remove the red and black at the ammeter join the done am i right. thanks

I have bean surcharging for a voltage regulator for my 71 but don't know what best on line, i have electronic ing now no points now.thanks again.

First off its been a wile so good day,looking for your thoughts on a coil MSD I hear good things about that coil.i have electronic ing 4 pin ballast.but dont know what part # i need,also is there a better one, things change to fast now a days.thanks gang.

Have look on line and cant find the part #for Taylor made or accell, 8mm what i need 6 straight and 2 90 degrees can someone help in my search please.working on a little 318.

Does that light use a orange wire,I am almost done installing my B&M Quick silver shifter and that shifter has an indicator light sweet.Happy New Year BOYSSSSSSSSSSSSSSSSS.

I have the lamp assembly coming,how knows what the bulb number.70-72 Duster thanks.

On my 74 Duster there is a condenser that goes to the coil what side + - does it go.Dont know much about that little guy,i have always toss it.

Hey guys,have a little problim,When i go to start nothing from the key.The yellow wire at the relay with my test light it glows, when i try to start but no crank-en so we know thats fine,the brown wire does not light I think thats right?.Now when the key is on start posion and i jump at relay...

Hi all, waiting for parts to come in :pale: so I thought I may as well install the radio/ cd player.I need to know what colour wire is the ing switch power,could you please tell me,it 74 Duster.Dam its cold.:evil3:

First, what # light goes to that connection its small.Second is that were the ground goes.Sorry I should know but.

Ok got the harness all tape up,but I need to know what to use to clean up inside this.I have used sand paper on the male end but what about the female side.

Just started to remove the engine harness,and came across something that does not look factory or is it.In the pic there are 3 wires 1 red 1 brown and the outher looks like black they connect to a connector that runs through the firewall,there thick wires the red 1 i know it goes to the relay...

Has anyone ever installed peanut bulbs to side markers our 69 Darts did not come with them,dont know why? but i would like to do this mode,share your thoughts.

Hi guys,right now i have the 5 pin ecu with the 4 terminal resistor.I just pick up a new ecu witch is the 4 pin,will this work.Sorry this has been ask a million times.

Went for a cruse last night, and right at a stop light she died.Push it off to the side,got fuel,check spark nothing waited a few seconds took at look around to see what is a miss.Tried again we have spark Huston:D. Every thing is like new.So could the ing box witch is a factory unit got a tad...

Not a good way to start the day I snap my ing key in 2 inside my trunk lock,Cindy says I told ya we should have a spare :oops: so I got it out,my Question is can a new key be made.

I installed a new ing switch in the 69 Dart and so far no problems,until today.Went to start firered right up,but no signal lights, dash lights,stereo,heater,temp gauge,fuel gauge,have brake lights thank God.Got home shut her down turned key to on position every thing works what gives me...

Sorry I have to ask this here.My 99 Sunfire 4 door power window switch has gone south only the drivers side switch is bad.The window will go down but not up.Some time ago a buddy of mine witch I cant get a hold of, yet jump the switch to get it back up,but did not tell me how to do it.The thing...

This is on my 69 Dart my org ignition switch has given me fits not working right for 2 long now.So I got a new one along with the door locks:cheers:a must have.What i would like to know is how does the switch remove and install back into the housing.Right now I can slide my switch in and out...

Ok had this problem when first started to restore the Dart.My fuel Gague reads way empty now the sending unit is only 3 years young.could someone refresh me on how to test to find the problem.If I remember right if I pull the wire off the unit and ground it the gauge should go to full meaning...

Could be a Christmas gift for me:D,as for an aftermarket ing coil what is out there that is better than a stock coil? My dart 360 was converted over to electronic ignition 2 years ago with the chrome ecm box.I would like a coil to just bolt on and away i go.I just got an Accel coil in a swap...

Looking for some feed back on what distributor cap & rotor ya use on your SB.If I remember right the onessss with the brass terminals are the ones to get right or wrong.I am about to order an Accel#8320,but haven't priced it yet. whats out there guyssssssss.

Just installed my new Signal light switch on the 69 Dart,went very well.Now my horn does not work, it would work some times and not in the past.Am I right is the horn relay on the left side kick panel it is clicking loudly when I push on the center cap,so I am thinking its gone south. any...

Went to the first cruise in tonight and had a blast,my buddy showed up with hi 70 340 Duster very nice car.he sats Don I dont know what happened he says new Regulator last year and alt all electronic.It is over charging big time my needle is peg he left early hopeing to limp home.We UN hook the...

First off excuse me for not knowing what the name is but,I am ready to install my new signal light switch in my 69 Dart,non tilt.How do I remove thoes 7 brass male ends from the plastic connector and install my new wires.In the past I just cut the wires and joined them.is there a special tool ...

This has nothing to do with our mopars,but my 2sd oldest daughter Toni has a problem,here it goes her friend has a 2001 Chev Caviler ,the friend had the key in her ignition and car was running.they got fighting ya cat fight lol,my Toni went to grab the keys from the ing and pulled them out at...