Search results for query: *

Does anybody have a stash of the Mopar silicone bypass hoses? I need one but would buy a few if available.

I'd really like to find an original style black plug for the hole below the vent window that fills an allen screw access hole for vent window adjustment. Th originals were flexible rubber/vinyl, not the hard plastic replacements now on the repop market. I just need one, but would take a couple...

I'd like to find a couple of the kickdown rods nearest the carb in the pictures below. They seem to solve some geometry issues when converting a 2bbl to a 4bbl. Going from the carb back, there is a kick toward the center of the car and a kick up and down. without the slotted piece screwed on...

Some time ago I bought a few of these from somebody on FABO. They were pieces from Mopar that were designed for police fleets. Want to buy several, but would take what is available.

Does anybody have an undamaged set of fins (one) to replace the one in the picture that they would be willing to part with??? There are lefts and rights (has to do on which side the end is rounded to go around the PCV valve/ breather). Hoping somebody salvaged a set from a damaged cover. Send PM!

I'm looking for a pair of the factory black wrinkle finish valve covers with finned aluminum inserts for a 1965 Barracuda (2 stove pipes). Please PM offers shipped to 98070

I'm looking for the little rubber plug in the upper inside door panel that plugs the hole for accessing the Allen screw just below the vent window in a 70 Dart. The plug is colored to match the painted surface of the inside of the door. I need a black one - just one but would buy a couple extras.

As the title says, 70-72 darts have 9 screws that hold the stainless hood edge trim in place. I am looking for at least 7 excellent screws. Picture below. please PM with price, including shipping and a picture of the heads of what you have. The best ones I have are 1/2 long threads, but I...

I am looking for the power steering pump brackets for a 1967 Dart/ LA small block with lower radiator hose on the drivers side and cast iron water pump. Send PM with photos, and specify whether for a Federal or Saginaw pump. Shipping will be to Vashon, WA 98070 (flat rate box?)

I am looking for a console door hinge in excellent condition for a 1967-69 A body. This hinge springs the console door closed, as opposed to 70-76 hinges which spring the door open. Please send PM with photos, and price including shipping to Vashon WA - 98070. Thank you for your help

I'm looking for a few parts to top off my new 318 with an AVSII four barrel. I need a new or like new 318 four barrel orange pie tin, and a 1/4" carb stud and a factory style 1/4" "hollow" wing nut. Would consider other interesting nuts.

I am still desperately seeking a case for a 42 RH - A500 Torqueflite 4 speed transmission. My freshly rebuilt unit was damaged during installation and I need a case to put the fresh guts into. Need the main case, not the tailshaft that hoses the 4th gear setup.

I need a good main case for an RH42/A500 transmission. Please send PM!

Several years ago, at a swap meet, I bought a fake vintage battery case that was correct for my 1970 Dart that put an Optima 34 series battery inside the fake 24 series case with screw on caps. It isn't perfect but I like it for a car that we show in "stock" classes. I can't figure out who...

This is for a 1970 Dart and I think they are the same for 1968-71 Darts. I'm changing interior colors and bought new seat belts, but the rear lap belts didn't come with the sleeves that hold the belt up on the outsides of the back bench seat where they snake up between the back bench bottom and...

(Yeah I know, that would be interior, but I can't figure out how to edit the title) I'm looking for something I can bolt on with minimal muss and fuss while the interior is out. prefer button to release, but you can find the buttons easy. I have seen ones that have a plastic housing and...

I'm pulling together all the parts to install an inside hood release on my 70 Dart. I have the cable and the bracket/handle for inside the car. I believe that the latch itself must be different because the current latch operates from the opposite side (you would have to push the cable and that...

I'm rebuilding the sliders for the bucket seats in my 1970 Dart. Inside each track there are two sets of bearings (one on either end) and the set consists of a roller that takes the weight of the seat and two ball bearings that allow the two parts of the slide to actually slide. Here is a...

I'm looking for a 904 with electric lock up converter (converter not needed - just the feature) somewhere in the Pacific Northwest (I'm near Tacoma). Plan to do a complete rebuild so this is a place to start.

I'd like to install one of those electric trunk latches with an inside release button on my 1970 Dart. I understand that 1984-89 M bodies are a bolt in replacement. If you have the wiring and button that's even better, but not essential. send PM Thanks!

I'm building a 70 Dart for long distance road trips and am looking for later inside trunk and hood releases for security. Anybody have complete set ups for sale???

I am rebuilding the steering column in my 1970 Dodge Dart (automatic). The middle of the three pieces that are behind the steering wheel is held to the steering column housing with four hex head screws (see pics below). They are fine thread, thread cutting screws and the threaded part is an...

I need a pair of the clear plastic sheets that go on the inside quarter structure where the rear quarter window is - the one that keeps water from getting to the rear interior side panels. At the very least I'm looking for one that is in good enough shape to use as a pattern to make a pair of...

I am looking for two of these pieces which go inside the door on the control stick mechanism of the remote side mirror. It is opposite the chrome bezel that is seen at the control stick inside the car. It holds the mechanism in the correct location in the inside door shell. Please PM if you...

I need a driver side vent box in undamaged, functional condition. It's going in a show car that will be driven. When I went to clean up the old one, the scrub brush put a hole in the bottom of the box and when I checked it it was brittle and deteriorated - never seen anything like that. I can...

I am in need of the short straight stainless trim piece that covers the rain gutter adjacent to the windshield on the right (passenger side) of my 70 Dart this is the short straight section of trim that also runs parallel to the diagonal portion of the vent window. It is not the stainless...

Well I'm convinced that no one has the correct seals that attach to the front of the door glass and move up and down with the window. Some call this a glass run channel seal. Evidently the factory that made them burned down and all the stock has been grabbed up. So the car still has to go...

I've spent a stupid amount of time on the interweb trying to find one of these. Looking to buy or find a source. This is NOT the big wide wingnut that holds the spare and jack base in place, but rather the wing nut that goes on top and holds the spare tire board and the metal cup down. I'm...

I'm looking for the flocked U-shaped slide/seal with clips and metal pins that attaches to the front of the door glass and runs in the channel on the back of the vent window. All repop sources are out of them, would pay a premium for a set.

Up until the early 2000s YearOne sold this Mopar package that includes the chrome pivot socket and chrome washer, screws and black rubber gaskets that go through the vent window glass. Year One number was FD9201, Chrysler number was 02932437 or MS3821R&L for each side. Looking to buy 2 sets.